Beijing Silk Road Enterprise Management Services Co., Ltd.
| Capacitance | 2.2uF |
| Operating Temperature | -40℃~+110℃ |
| Ratings | X2 |
| Tolerance | ±10% |
| Voltage(AC) | 310V |
| Description | 2.2uF -40℃~+110℃ X2 ±10% 310V Through Hole,P=27.5mm Ceramic Capacitors RoHS |
| Mfr. Part # | MX2225KQ3F20YB2000R |
| Package | Through Hole,P=27.5mm |
| Model Number | MX2225KQ3F20YB2000R |
View Detail Information
Explore similar products
Ceramic capacitor AIDE CAPACITOR 1210X7R476K100NT designed for switch power
ceramic capacitor AIDE CAPACITOR 0603X7R105K100NT for energy saving lamps and
Multi Layer Ceramic Capacitors with CCTC TCC0603X5R105K500CT Specification and
Surface mount multilayer ceramic capacitors Chinocera HHV0805R7102K201NTHJ with
Product Specification
| Capacitance | 2.2uF | Operating Temperature | -40℃~+110℃ |
| Ratings | X2 | Tolerance | ±10% |
| Voltage(AC) | 310V | Description | 2.2uF -40℃~+110℃ X2 ±10% 310V Through Hole,P=27.5mm Ceramic Capacitors RoHS |
| Mfr. Part # | MX2225KQ3F20YB2000R | Package | Through Hole,P=27.5mm |
| Model Number | MX2225KQ3F20YB2000R |
The DGCX X2 series are metallized polypropylene film capacitors designed for suppressing electromagnetic interference in power supplies. These capacitors feature a non-inductive winding structure with self-healing properties, capable of withstanding high voltage surges. They are encapsulated in a flame-retardant plastic case (PBT) and epoxy resin, meeting UL94V-0 standards. Ideal for interference suppression circuits and X-class applications where capacitor failure should not pose a shock hazard. Not recommended for capacitive power supplies or high-temperature/high-humidity environments.
| Model | Capacitance (uF) | Tolerance (%) | Rated Voltage (VAC) | Pitch (mm) | Dimensions (W*H*T, mm) | Lead Length (mm) | Product Code |
|---|---|---|---|---|---|---|---|
| DGCX X2 225K/275V/300VAC/310VAC | 2.2 | 10% | 275/300/310 | 27.5 | 31.5*22*13 | 20 | MX2225KQ3F20YB2000R |
| Parameter | Specification | Test Condition |
|---|---|---|
| Operating Temperature Range | -40 ~ +110 | - |
| Climate Category / Flame Retardancy | 40/110/56 B | - |
| Capacitance Range | 0.001F ~ 4.7F | - |
| Capacitance Tolerance | 10% (K) | - |
| Rated Voltage | 275/300/310 VAC | - |
| Dissipation Factor (DF) | 0.0010 (for 0.001F CR 0.47F) | 1kHz, 20 |
| 0.0020 (for 0.47F < CR 1.0F) | 1kHz, 20 | |
| Insulation Resistance | 15,000 M | C 0.33uF (100VDC, 60 sec) |
| 5000 M*uF | C > 0.33uF (100VDC, 60 sec) | |
| Dielectric Strength (Between Terminals) | 4.3 * UR (VDC) | 60 sec |
| Dielectric Strength (Between Terminals & Case) | 2120 VAC | 60 sec |
| No. | Main Material | Description | Remarks |
|---|---|---|---|
| 1 | Metallized Polypropylene Film | MPPZAH | - |
| 2 | Sprayed Layer | Zinc-tin alloy wire | - |
| 3 | Leads | Tinned copper-clad steel wire | - |
| 4 | Potting Material | Epoxy Resin | Flame-retardant UL94V-0 |
| 5 | Outer Protection Material | PBT Plastic Case | Flame-retardant UL94V-0 |
| Item | Dimensions (L*W*H cm) |
|---|---|
| Inner Carton | 34.5*23.5*24.5 |
| Outer Carton | 49*36*27 |
| No. | Item | Characteristic | Test Method |
|---|---|---|---|
| 1 | Terminal Strength | Tensile Strength | Wire diameter: 0.6&0.8mm, Load: 10N, Time: 10 seconds; Wire diameter: 1.0&1.2mm, Load: 20N, Time: 10 seconds |
| Bending Strength | Wire diameter: 0.6&0.8mm, Force: 5N, 90x2 times; Wire diameter: 1.0&1.2mm, Force: 10N, 90x2 times | ||
| 2 | Solderability | Tinning rate of leads 95% | Soldering temperature: 2455, Immersion time: 2.50.5 seconds |
| 3 | Soldering Heat Resistance | Appearance: No visible damage | Soldering temperature: 2605, Immersion time: 101 seconds |
| Recovery Time | - | 1-2 hours at -40, 2 hours | |
| DF Increase | 0.005 | - | |
| Capacitance Change | C/C 5% | - | |
| 4 | Temperature Rapid Change | Appearance: No visible damage | A=-40, B=+105, 5 cycles; Duration: t=30min |
| Vibration | Appearance: No visible damage | Amplitude 0.75mm or acceleration 98m/s (whichever is smaller), Frequency 10-500Hz, 3 mutually perpendicular directions, 2h each direction, total 6h | |
| Shock | Appearance: No visible damage | 4000 times, acceleration 390m/s, pulse duration: 6ms | |
| Final Measurement (Capacitance Change) | C/C 5% | - | |
| Final Measurement (DF Increase) | 0.008 (C1.0F, 10kHz); 0.005 (C>1.0F, 1kHz) | - | |
| Final Measurement (Insulation Resistance) | IR/IR 50% | - | |
| 5 | Climate Sequence | Appearance: No visible damage | Dry Heat +105, 16 hours (Test Db, 1st cycle); Cyclic Damp Heat, Cold, Cyclic Damp Heat (Test Db, remaining cycles) |
| Final Measurement (Capacitance Change) | C/C 5% | - | |
| Final Measurement (DF Increase) | 0.008 (C1.0F, 10kHz); 0.005 (C>1.0F, 1kHz) | - | |
| Final Measurement (Insulation Resistance) | IR/IR 50% | - | |
| 6 | Damp Heat, Steady State | Appearance: No visible damage | Relative Humidity 90-95%RH, Temperature: 402, No load, Duration: 56 days |
| Recovery Time | - | 1-2 hours | |
| Capacitance Change | C/C 5% | - | |
| DF Increase | 0.008 (C1.0F, 10kHz); 0.005 (C>1.0F, 1kHz) | - | |
| Insulation Resistance | IR/IR 50% | - | |
| 7 | Pulse Voltage | - | Apply pulse voltage: 2.5KV (for CR1 F); (for CR > 1 F) |
| 8 | Endurance | Appearance: No visible damage | Temperature: +110; Test Voltage: 1.25 UR; Test Time: 1000 hours |
| Dielectric Strength | - | 4.3 UR(VDC), 60 seconds | |
| Capacitance Change | C/C 10% | - | |
| DF Increase | 0.008 (C1.0F, 10kHz); 0.005 (C>1.0F, 1kHz) | - | |
| Insulation Resistance | IR/IR 50% | - | |
| 9 | Charge/Discharge | Capacitance Change | C/C 5% |
| DF Increase | 0.008 (10KHz, CR1.0uF); 0.005 (1KHz, CR>1.0uF) | ||
| Insulation Resistance | IR/IR 50% | ||
| 10 | Flammability Test | Burning time after flame removal 10 seconds; Burning drippings should not ignite cotton paper | Needle Flame Test: Flame retardancy grade B. Application time based on product volume (mm). |
| 11 | Self-Ignition Test | - | - |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!