Beijing Silk Road Enterprise Management Services Co., Ltd.
| Description | Through Hole,P=5mm Ceramic Capacitors RoHS |
| Mfr. Part # | C81Y5P471K2KV6060MT |
| Package | Through Hole,P=5mm |
| Model Number | C81Y5P471K2KV6060MT |
View Detail Information
Explore similar products
Ceramic capacitor AIDE CAPACITOR 1210X7R476K100NT designed for switch power
ceramic capacitor AIDE CAPACITOR 0603X7R105K100NT for energy saving lamps and
Multi Layer Ceramic Capacitors with CCTC TCC0603X5R105K500CT Specification and
Surface mount multilayer ceramic capacitors Chinocera HHV0805R7102K201NTHJ with
Product Specification
| Description | Through Hole,P=5mm Ceramic Capacitors RoHS | Mfr. Part # | C81Y5P471K2KV6060MT |
| Package | Through Hole,P=5mm | Model Number | C81Y5P471K2KV6060MT |
The CT81 series of ceramic disc capacitors are designed for high-voltage applications. These capacitors are primarily used in the power supply circuits and horizontal output circuits of color TVs, computer monitors, copy machines, and energy-saving lamps. They are constructed with a ceramic dielectric, silver electrodes, and an epoxy resin coating, ensuring reliability and performance in demanding electronic systems.
| Product Code | Model Specification | Rated Voltage | Nominal Capacitance | Tolerance | Temperature Characteristic | Max Diameter (Dmax) | Max Thickness (Tmax) | Lead Spacing (F) | Lead Diameter (d) |
|---|---|---|---|---|---|---|---|---|---|
| C81Y5P471K2KV6060MT | CT81 471K 2KV (Y5P) | 2KV | 471 (470pF) | K (+/-10%) | Y5P | 6.5 mm | 2.5 mm | 5 mm | 0.6 mm |
| Item | Specification | Test Method and Conditions |
|---|---|---|
| Storage Temperature Range | -40 ~ +85 | N/A |
| Operating Temperature Range | -25 ~ +85 | N/A |
| Appearance and Dimension | Appearance has no marked defect. Dimensions shall be within specified tolerance. | Appearance observed visually. Dimensions measured by caliper. |
| Marking | Should be clearly visible. | Observed visually. |
| Capacitance | Within specified tolerance. | Temp: 202, Vol: 1.00.2Vrms, Freq: 10.1KHz |
| Dissipation Factor | 0.2% max | Same condition as capacitance. |
| Insulation Resistance | > 10,000 M | Charged with 50050V.DC for 1 minute. |
| Dielectric Strength (Between Lead Wires) | No failure. | Apply 150% of rated voltage for 1 min. (Charge/discharge current 50mA) |
| Dielectric Strength (Body Insulation) | No failure. | Apply 150% of rated voltage between lead wires and metal foil wrapped around body for 1 min. (Charge/discharge current 50mA) |
| Temperature Characteristic (Y5P) | Ct - C3 / C3 = +22% to -33% | Pre-treatment: 852 for 1 hr, then room condition for 242 hrs. Tested at specified temperatures (-25, 20, 85). |
| Strength of Lead Wires (Pull) | Lead wire shall not cut off and capacitor shall not be damaged. | Apply 10N tensile weight in lead direction for 101 sec. |
| Strength of Lead Wires (Bending) | No failure. | Apply 5N weight and bend 90 twice in opposite directions. |
| Soldering Effect | Capacitance Change: 10% max | Pre-treatment: 852 for 1 hr, then room condition for 242 hrs. Post-treatment: Room condition for 242 hrs. |
| Temperature Cycling | Appearance: No marked defect. Capacitance Change: 10% max | 5 cycles of -25 to 85. Pre-treatment and Post-treatment as specified. |
| Vibration Resistance | Appearance: No marked defect. Capacitance Change: 10% max | 10Hz-500Hz, 1.5mm amplitude, 6 hours total (2 hrs per axis). Pre-treatment and Post-treatment as specified. |
| Solderability of Lead Wires | Tinned area > 90%. | Dipped in molten solder at 2455 for 20.5 sec. |
| Collision Resistance | Appearance: No marked defect. Capacitance Change: 10% max | Acceleration 390m/s, pulse 6ms, 4000 times. Pre-treatment and Post-treatment as specified. |
| Humidity Cycling | Appearance: No marked defect. Capacitance Change: 10% max. DF: 0.2% max. IR: > 2500 M | 402, 953% RH for 8 hrs, room condition for 16 hrs, 5 cycles. Post-treatment: 1-2 hrs at room condition. |
| Humidity (Under Steady State) | Appearance: No marked defect. Capacitance Change: 10% max. DF: 0.2% max. IR: > 2500 M | 402, 953% RH for 50012 hrs. Pre-treatment and Post-treatment as specified. |
| Life Test | Appearance: No marked defect. Capacitance Change: 10% max. DF: 0.2% max. IR: > 4000 M | 150% rated voltage at 852 for 1000 hrs. (Charge/discharge current 50mA). Pre-treatment and Post-treatment as specified. |
| Pressure Cooking | Appearance: No marked defect. IR: > 1500 M. Dielectric Strength: Per Item 8. | 1212, 2 atm for 4 hrs. Pre-treatment and Post-treatment as specified. |
Packing Quantity: 500 pcs per bag (Bag Size 2: 190x190mm)
Packing Marking Example: DGGX Logo, Code, Model, Lot Number, Production Date, Quantity per Bag.
Outer Packaging: Internal boxes (A1, A2) and Over-wrap boxes (B1, B2). Packing quantity should be in integral multiples of 100 or 500.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!