Ceramic Capacitors FH BK Guangdong Fenghua Bangke Elec 1206B332M102NT in Bulk

Product Specification

Product Overview

This document outlines the specifications for a series of civil-grade multilayer ceramic dielectric capacitors from Guangdong Fenghua Bangke Electronics Co., Ltd. These capacitors are available in 0805 and 1206 series, featuring C0G (Class I) and X7R (Class II) dielectric materials. They are designed for various applications requiring stable capacitance, low loss, and high insulation resistance, with options for different voltage ratings, capacitance values, and tolerances. The product is offered in bulk or tape and reel packaging.

Product Attributes

• Brand: Fenghua Bangke
• Origin: Guangdong, China
• Product Type: Civil-grade multilayer ceramic dielectric capacitors
• Dielectric Types: C0G (Class I), X7R (Class II)
• Series: 0805, 1206
• Terminal Material: Three-layer plating
• Packaging Options: Bulk (B), Tape and Reel (T)
• Approval Date: 2021-3-4

Technical Specifications

Model Specification Method:

• Size Specification: 0805 (2.031.27 mm / 0.080.05 inch), 1206 (3.201.52 mm / 0.120.06 inch)
• Dielectric Type: CG (C0G), B (X7R)
• Nominal Capacitance (pF): Indicated by the first two digits as significant figures, the third digit as the number of zeros, and 'R' for decimal point (e.g., 0R5 = 0.5pF, 101 = 1010^1 pF).
• Capacitance Tolerance: J (5%), K (10%), M (20%)
• Rated Voltage: Indicated by the first two digits as significant figures, the third digit as the number of zeros (e.g., 500 = 5010^0 V, 102 = 1010^2 V).
• Terminal Material: N (Three-layer plating)
• Packaging Form: B (Bulk), T (Tape and Reel)

Dimensions and Structure:

Product Model Parameters:

Testing Conditions and Methods:

• Visual Inspection: 100% inspection for deformation, damage, dents, cracks, burrs, foreign matter, delamination, or metallization detachment.
• Room Temperature Test: 100% testing at room temperature to ensure electrical parameters meet Table 2 specifications.
• Sampling Plan (Table 3): For capacitance, dissipation factor, insulation resistance, dielectric withstand voltage, dimensions, appearance, and solderability.
• Inspection Methods (Table 4):
• Capacitance: Tested at 1MHz50KHz (Class I 1000pF, Class II 100pF) or 1KHz50Hz (Class I >1nF, Class II 100pF < C 10uF).
• Dissipation Factor: Tested at 1MHz50KHz or 1KHz50Hz, with specific requirements for Class I and Class II (X7R, X5R) based on capacitance and voltage.
• Insulation Resistance: Tested between terminals at rated voltage (UR500V) or 500V (UR>500V), reading time 2min.
• Dielectric Withstand Voltage: Applied voltage varies based on rated voltage (2.5UR to 1.2UR), duration (51)s, surge current 50mA. Capacitor should show no breakdown, arcing, or visible damage.
• Dimensions: Checked with appropriate precision measuring tools (refer to Table 1).
• Appearance: Visual or 10x microscope inspection for defects.
• Solderability: Immersion in solder bath at 2455 for 2s. Tinning rate >90%.

Storage Method:

• Storage period: One year. Recommended to use within 6 months of purchase to ensure solderability.
• Storage Temperature: -1040
• Storage Humidity: 3070% RH