Beijing Silk Road Enterprise Management Services Co., Ltd.
| Resistance | 150mΩ |
| Power(Watts) | 3W |
| Voltage Rating | - |
| Type | Current Sense Resistor |
| Tolerance | ±5% |
| Description | 150mΩ 3W Current Sense Resistor ±5% 2512 Chip Resistor - Surface Mount RoHS |
| Mfr. Part # | JER2512J3R150 |
| Package | 2512 |
| Model Number | JER2512J3R150 |
View Detail Information
Explore similar products
High precision Thin Film Chip Resistor EVER OHMS TR0603D10R0P0510Z with stable
Wire Wound Wafer Resistor Huaxing Mechanical-Elec RXM0309-27RJ for Energy Saving
Flat Chip Resistors KOA SG73W2HTTE821K Anti Surge Type Suitable for Reflow and
Metal glaze thick film chip resistor KOA RK73H1ETTP1R65F with excellent weather
Product Specification
| Resistance | 150mΩ | Power(Watts) | 3W |
| Voltage Rating | - | Type | Current Sense Resistor |
| Tolerance | ±5% | Description | 150mΩ 3W Current Sense Resistor ±5% 2512 Chip Resistor - Surface Mount RoHS |
| Mfr. Part # | JER2512J3R150 | Package | 2512 |
| Model Number | JER2512J3R150 |
The PATCH RESISTOR is a pure alloy high-power current sensing resistor designed for accurate current detection. It features a surface-mount design (SMD), high power handling capabilities up to 3W, and ultra-low resistance values as low as 0.0m. This resistor is ideal for applications requiring precise current monitoring and is compliant with AEC-Q200 standards.
| Type | Rated Power (W) | Resistance Range (m) | TCR (ppm/) | Insulation Resistance (M) | Dimensions (mm) L x W x T | Max. Working Current (A) |
|---|---|---|---|---|---|---|
| 1206 | 1W (0.5W for higher resistance) | 1m ~ 200m | 350 (1m), 50 (2m~100m), 50 (110m~200m) | >100 | 3.200.20 x 1.600.20 x 0.600.20 | Not specified |
| 2512 | 2W, 3W | 0.5m ~ 500m | 50 (1m~4m), 350 (0.5m), 50 (2m~500m) | >100 | 6.400.20 x 3.200.20 x 0.800.20 | Not specified |
| 0805 | 0.25W, 0.5W | 1m ~ 20m | 350 (1m), 50 (2m~20m) | >100 | 2.000.20 x 1.250.20 x 0.600.20 | Not specified |
JER1206F1R500(L): JER Series, 1206 Size, 1W Rated Power, 1% Tolerance, 500m Resistance.
Resistance Code: R50m = 0.5m, R001 = 1m, 1R5m = 1.5m, R002 = 2m, R500 = 500m
Operating Temperature Range: -55 to +170.
Power Derating: Maximum load power should be reduced when operating in ambient environments above 70, as per the power attenuation curve.
Rated Current Calculation: I = P/R (where I is rated current, P is rated power, R is resistance). If calculated current exceeds the maximum working current for the type, the maximum working current shall be considered the rated current.
| Size | Reel Diameter (A) (mm) | Hub Diameter (B) (mm) | Core Diameter (C) (mm) | Tape Width (F) (mm) | Pitch (Q) (mm) | Quantity/Reel |
|---|---|---|---|---|---|---|
| 1206 | 1782.00 | 60.001.00 | 13.500.50 | 11.400.10 | 9.000.30 | 5000 |
| 2512 | 1782.00 | 60.001.00 | 13.500.50 | 15.401.00 | 13.000.30 | 4000 |
| 0805 | 1782.00 | 60.001.00 | 13.500.50 | 11.400.10 | 9.000.30 | 5000 |
Paper carrier tape: 0.1N to 0.7N (10 to 70 g). Plastic carrier tape: 0.3N to 1N (30 to 100 g) at a speed of 300 mm/min and an angle of 165-180 degrees.
Suggested solder paste: 96.5Sn/3.0Ag/0.5Cu. Refer to Reflow-Soldering Profile and Wave-Soldering Profile for specific recommendations.
| Size | Resistance Range | a | b | L |
|---|---|---|---|---|
| 1206 | 1m~200m | 1.8 | 1.7 | 1.6 |
| 2512 | 0.5m~4m (Large electrode) | 4.0 | 3.1 | 1.8 |
| 2512 | 1m~500m | 4.0 | 2.1 | 4.1 |
| 0805 | 1m~20m | 1.4 | 1.2 | 1.4 |
| Project | Test Method | Condition | Standard | Requirement |
|---|---|---|---|---|
| Short Time Overload | IEC60115-1 4.13 | Applied 5.0 times rated power for 5s | - | R% 1% |
| Temperature Coefficient | IEC60115-1 4.8 | -55 to +125 or +155 | - | Refer to Spec. |
| Temperature Cycling | JESD22 Method JA-104 | 1000 Cycles (-55 to +125) | - | R% 1% |
| High Temperature Exposure | MIL-STD-202 Method 108 | 1000 hrs @ 125 | - | R% 1% |
| Low Temperature Operation | IEC60115-1 4.23.4 | 45 min @ -55 | - | R% 1% |
| High Temperature and High Humidity | MIL-STD-202 METHOD 103 | 1000 hours 85/85%RH (10% rated power) | - | R% 1% |
| Weldability | J-STD-002B test B | 2455 for 2~3 sec | - | Min 95% coverage |
| Operational Life | MIL-STD-202 METHOD 108 | 1000 hours at 702 (rated current) | - | R% 1% |
| Resistance to Vibration | MIL-STD-202 METHOD 204 | 5g's, 10-2000Hz, 12 cycles | - | R% 1% |
| Resistance to Solder Heat | IEC60115-1 4.18 | 2605 for 101 sec | - | R% 1%, No visible damage |
| Terminal Bending | AEC-Q200-005 | Min 2mm deflection, 60 sec | - | R% 1% |
| Mechanical Shock | MIL-STD-202 METHOD 213 | 100g's, 6ms, half sine | - | R% 1% |
| Terminal Strength | AEC-Q200-006 | 17.7N (1.8Kg) for 601 sec | - | R% 1% |
| Thermal Shock | MIL-STD-202 METHOD 107 | 300 cycles (-55/+125), 20s transfer time, 15 min dwell | - | R% 1% |
| Flammability | UL-94 | - | V-0 or V-1 | Acceptable |
| ESD Test | AEC-Q200-002 | 2KV, 2 times/1s | - | R% 1% |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!