Beijing Silk Road Enterprise Management Services Co., Ltd.
| Resistance | 10mΩ |
| Power(Watts) | 3W |
| Type | Current Sense Resistor;Alloy Resistor |
| Tolerance | ±1% |
| Description | 10mΩ 3W ±1% 2512 Chip Resistor - Surface Mount RoHS |
| Mfr. Part # | RE2512F3R010 |
| Package | 2512 |
| Model Number | RE2512F3R010 |
View Detail Information
Explore similar products
High precision Thin Film Chip Resistor EVER OHMS TR0603D10R0P0510Z with stable
Wire Wound Wafer Resistor Huaxing Mechanical-Elec RXM0309-27RJ for Energy Saving
Flat Chip Resistors KOA SG73W2HTTE821K Anti Surge Type Suitable for Reflow and
Metal glaze thick film chip resistor KOA RK73H1ETTP1R65F with excellent weather
Product Specification
| Resistance | 10mΩ | Power(Watts) | 3W |
| Type | Current Sense Resistor;Alloy Resistor | Tolerance | ±1% |
| Description | 10mΩ 3W ±1% 2512 Chip Resistor - Surface Mount RoHS | Mfr. Part # | RE2512F3R010 |
| Package | 2512 | Model Number | RE2512F3R010 |
High-power alloy current sense resistors for current detection, featuring SMD patch mounting, high power handling up to 3W, and ultra-low resistance values (down to 0.0R). These resistors are designed for demanding applications requiring precise current measurement and excellent temperature stability.
| Size | Type | Rated Power (W) | Resistance Tolerance | Resistance Range (m) | Material | TCR (ppm/) | Operating Temperature Range () | Insulation Resistance (M) |
|---|---|---|---|---|---|---|---|---|
| 2512 | Large Electrode | 2W/3W | F:1%, G:2%, J:5% | <0.45m (R000) | MnCu | 350ppm/ | -55~+170 | 100 |
| 2512 | Large Electrode | 2W/3W | F:1%, G:2%, J:5% | 0.5m (R0005) R 4m (R004) | MnCu | 50ppm/ | -55~+170 | 100 |
| 2512 | Small Electrode | 3W/4W | F:1%, G:2%, J:5% | 1m (R001) R 20m (R020) | MnCu | 350ppm/ | -55~+170 | 100 |
| 2512 | Small Electrode | 3W/4W | F:1%, G:2%, J:5% | 1m (R001) R 20m (R020) | MnCu | 50ppm/ | -55~+170 | 100 |
| 2512 | Small Electrode | 2W/3W | F:1%, G:2%, J:5% | 20m (R020) R 150m (R150) | MnCu | 50ppm/ | -55~+170 | 100 |
| 2512 | Small Electrode | 2W | F:1%, G:2%, J:5% | 150m (R150) < R 220m (R220) | CuNi | 50ppm/ | -55~+170 | 100 |
| 2512 | Small Electrode | 2W | F:1%, G:2%, J:5% | 220m (R220) < R 400m (R400) | CuNi | 50ppm/ | -55~+170 | 100 |
| 2512 | Small Electrode | 2W | F:1%, G:2%, J:5% | 400m (R400) < R 500m (R500) | Kama | 50ppm/ | -55~+170 | 100 |
| 1206 | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified |
| 0805 | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified |
RE2512F3R010(L) = RE Series, 2512 Size, 3W, 1% Tolerance, 10m Resistance
| Size | Type | Length L | Width W | Thickness T | Electrode Width E |
|---|---|---|---|---|---|
| 2512 | Large Electrode | 6.40.2 | 3.20.2 | 0.80.08 | 2.20.2 |
| 2512 | Small Electrode | 6.40.2 | 3.20.2 | 0.80.08 | 1.00.2 |
When the resistor is operating in an ambient environment above 70 C, the maximum load power should be reduced according to the curve.
I = P/R (I: Rated current (A), P: Rated Power (W), R: Resistance (ohm)). If the calculated current exceeds the maximum working current for the type, the maximum working current shall be regarded as the rated current.
Resistance Code examples: R50m=0.5m, R001=1m, R010=10m, R200=200m, R500=500m
Paper carrier tape: 0.1N to 0.7N (10 to 70 g). Plastic carrier tape: 0.3N to 1N (30 to 100 g) at a speed of 300 mm/min and an angle of 165 to 180 degrees.
| Size | Resistance Range | a | b | L |
|---|---|---|---|---|
| 2512 Large Electrode | 4.0 | 3.1 | 1.3 | |
| 2512 Small Electrode | 4.0 | 2.1 | 4.1 |
Recommended solder paste: 96.5Sn/3.0Ag/0.5Cu. Refer to IR Reflow-Soldering Profile and Wave-Soldering Profile for detailed parameters.
| Item | Test Method | Conditions | Specification |
|---|---|---|---|
| Short Time Overload | IEC60115-1 4.13 | Applied 5.0 times of rated power for 5 seconds. | R% 1% |
| Temperature Coefficient | IEC60115-1 4.8 | Resistance at room temp., +125 or +155. | Refer to Spec. |
| Temperature Cycling | JESD22 Method JA-104 | 1000 Cycles (-55 to +125). Measurement at 244 hours after test conclusion. | R% 1% |
| High Temperature Exposure | MIL-STD-202 Method 108 | 1000 hrs @ T=125. Measurement at 244 hours after test conclusion. | R% 1% |
| Low Temperature Operation | IEC60115-1 4.23.4 | 45 min. @ T=-55. Measurement after test conclusion. | R% 1% |
| Biased Humidity | MIL-STD-202 METHOD 103 | 1000 hours 85/85%RH, 10% of operating power. Measurement at 244 hours after test conclusion. | R% 1% |
| Solderability | J-STD-002B test B | Dip into soldering bath at 245 5 for 2~3 sec. | Min 95% coverage |
| Operational Life | MIL-STD-202 METHOD 108 | 702, rated current for 1.5H, rest for 0.5H, repeated for 1000 hrs. | R% 1% |
| Resistance to Vibration | MIL-STD-202 METHOD 204 | 5g's for 20min, 12 cycles, 10-2000Hz. | R% 1% |
| Resistance to Solder Heat | IEC60115-1 4.18 | Dip into soldering bath at 260 5 for 101 sec. | R% 1%, No visible damage |
| Terminal Bending | AEC-Q200-005 | Min 2mm deflection, 60 sec. | R% 1% |
| Mechanical Shock | MIL-STD-202 METHOD 213 | 100g's, 6ms, half sine shock pulse. | R% 1% |
| Terminal Strength | AEC-Q200-006 | Applied 17.7N (1.8Kg) for 601 seconds. | R% 1% |
| Thermal Shock | MIL-STD-202 METHOD 107 | -55/+125, 300 cycles, 15 min dwell time. | R% 1% |
| Flammability | UL-94 | V-0 or V-1 acceptable. | |
| ESD Test | AEC-Q200-002 | 2KV, 2 times/1s. | R% 1% |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!