Beijing Silk Road Enterprise Management Services Co., Ltd.
| Resistance | 0.5mΩ |
| Power(Watts) | 3W |
| Type | Current Sense Resistor;Alloy Resistor |
| Tolerance | ±1% |
| Description | 0.5mΩ 3W ±1% 2512 Chip Resistor - Surface Mount RoHS |
| Mfr. Part # | RE2512F3R0R5L |
| Package | 2512 |
| Model Number | RE2512F3R0R5L |
View Detail Information
Explore similar products
High precision Thin Film Chip Resistor EVER OHMS TR0603D10R0P0510Z with stable
Wire Wound Wafer Resistor Huaxing Mechanical-Elec RXM0309-27RJ for Energy Saving
Flat Chip Resistors KOA SG73W2HTTE821K Anti Surge Type Suitable for Reflow and
Metal glaze thick film chip resistor KOA RK73H1ETTP1R65F with excellent weather
Product Specification
| Resistance | 0.5mΩ | Power(Watts) | 3W |
| Type | Current Sense Resistor;Alloy Resistor | Tolerance | ±1% |
| Description | 0.5mΩ 3W ±1% 2512 Chip Resistor - Surface Mount RoHS | Mfr. Part # | RE2512F3R0R5L |
| Package | 2512 | Model Number | RE2512F3R0R5L |
Alloy resistors, also known as patch resistors, are high-power current-sensing resistors designed for accurate current detection. They feature SMD chip installation, high power handling capabilities, and ultra-low resistance values down to 0.0R. These resistors are ideal for applications requiring precise current monitoring and are compliant with AEC-Q200 standards.
| Size | Type | Rated Power (W) | Resistance Tolerance | Resistance Range (m) | Material | TCR (ppm/) | Operating Temperature Range () | Insulation Resistance (M) |
| 2512 Large Electrode | 2W/3W | <0.45m | F:1%, G:2%, J:5% | R0005 R R004 | MnCu | 350ppm/ | -55~+170 | 100M |
| 2512 Small Electrode | 3W/4W | R001RR020 | F:1%, G:2%, J:5% | R001 R R020 | MnCu | 50ppm/ | ||
| 2512 | 2W/3W | R001RR220 | F:1%, G:2%, J:5% | R001 R R220 | MnCu | 350ppm/ | -55~+170 | 100M |
| 2512 | 2W | R220RR500 | F:1%, G:2%, J:5% | R220 R R500 | MnCu | 50ppm/ | ||
| 2512 Large Electrode | 2W/3W | 0.5mR<1m | F:1%, G:2%, J:5% | 0.5mR<1m | MnCu | 350ppm/ | ||
| 2512 Small Electrode | 3W/4W | 1mR1.5m | F:1%, G:2%, J:5% | 1mR1.5m | MnCu | 350ppm/ | ||
| 2512 | 2W/3W/4W | 2mR20m | F:1%, G:2%, J:5% | 2mR20m | MnCu | 50ppm/ | -55~+170 | 100M |
| 2512 | 2W/3W | 20mR150m | F:1%, G:2%, J:5% | 20mR150m | MnCu | 50ppm/ | ||
| 2512 | 2W | 150mR220m | F:1%, G:2%, J:5% | 150mR220m | CuNi | 50ppm/ | ||
| 2512 | 2W | 220mR400m | F:1%, G:2%, J:5% | 220mR400m | CuNi | 50ppm/ | -55~+170 | 100M |
| 2512 | 4W | 400mR500m | F:1%, G:2%, J:5% | 400mR500m | Kama | 50ppm/ |
| Size | Type | L (mm) | W (mm) | T (mm) | E (mm) |
| 2512 Large Electrode | 6.40.2 | 3.20.2 | 0.80.08 | 2.20.2 | |
| 2512 Small Electrode | 6.40.2 | 3.20.2 | 0.80.08 | 1.00.2 |
| Test Item | Test Method | Conditions | Specification |
| Short Time Overload | IEC60115-1 4.13 | Applied 5.0 times of rated power for 5 second. Measure the variation of resistance. | 1% |
| Temperature Coefficient | IEC60115-1 4.8 | TCR=R-R0 /t-t0R0 10 6ppm | Refer to Spec. |
| Temperature cycling | JESD22 Method JA-104 | 1000Cycles (-55to +125) Measurement at 244 hours after test conclusion. | < 1% |
| High Temperature Exposure | MIL-STD-202 Method 108 | 1000 hrs. @T=125. Measure the variation of resistance at 244 hours after test conclusion. | < 1% |
| Low Temperature Operation | IEC60115-1 4.23.4 | 45 min. @T=-55. Measure the variation of resistance after test conclusion | < 1% |
| Biased Humidity | MIL-STD-202 METHOD 103 | 1000 hours 85/85%RH. Note: Specified conditions: 10% of operating power. Measurement at 244 hours after test conclusion. | 1% |
| Solderability | J-STD-002B test B | Dip the terminal in a flux and then dip into a soldering bath at 245 5for 2~3sec. | Min 95% coverage |
| Operational life | MIL-STD-202 METHOD 108 | 702 , applied rated current for 1.5H and rested for 0.5H repeatedly till total test time is 1000 +48/-0 .. Measure the variation of resistance. | 1% |
| Resistance to vibration | MIL-STD-202 METHOD 204 | 5g's for 20min.12cycles, 10-2000Hz . Measure the variation of resistance. | 1% |
| Resistance to Solder Heat | IEC60115-1 4.18 | Dip the terminal in a flux and then dip into a soldering bath at 260 5for 101sec. Measure the variation of resistance. | 1% |
| Terminal bending | AEC-Q200-005 | Min 2mm deflection,60sec.Measure the variation of resistance. | 1% |
| Mechanical Shock | MIL-STD-202 METHOD 213 | 100g's , Normal duration is 6ms , half sine shock pulse. Measure the variation of resistance. | 1% |
| Terminal Strength | AEC-Q200-006 | Applied a 17.7N (1.8Kg) for 601seconds. | 1% |
| Thermal shock | MIL-STD-202 METHOD 107 | -55/+125C, Number of cycles is 300. Devices mounted. Maximum transfer time is 20 seconds.Dwell time is 15 minutes. Air Air. Measure the variation of resistance. | 1% |
| Flammability | UL-94 | V-0 or V-1 are acceptable. Electrical test not required. | 1% |
| ESD test | AEC-Q200-002 | 2KV, 2times/1s | 1% |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!