Beijing Silk Road Enterprise Management Services Co., Ltd.
| Power(Watts) | 100mW |
| Resistance | 1kΩ |
| Voltage Rating | 75V |
| Temperature Coefficient | ±100ppm/℃ |
| Operating Temperature | -55℃~+155℃ |
| Type | Thick Film Resistor |
| Tolerance | ±1% |
| Description | 1kΩ ±1% 100mW 0603 Thick Film Resistor |
| Mfr. Part # | FRC0603F1001TS |
| Package | 0603 |
| Model Number | FRC0603F1001TS |
View Detail Information
Explore similar products
High precision Thin Film Chip Resistor EVER OHMS TR0603D10R0P0510Z with stable
Wire Wound Wafer Resistor Huaxing Mechanical-Elec RXM0309-27RJ for Energy Saving
Flat Chip Resistors KOA SG73W2HTTE821K Anti Surge Type Suitable for Reflow and
Metal glaze thick film chip resistor KOA RK73H1ETTP1R65F with excellent weather
Product Specification
| Power(Watts) | 100mW | Resistance | 1kΩ |
| Voltage Rating | 75V | Temperature Coefficient | ±100ppm/℃ |
| Operating Temperature | -55℃~+155℃ | Type | Thick Film Resistor |
| Tolerance | ±1% | Description | 1kΩ ±1% 100mW 0603 Thick Film Resistor |
| Mfr. Part # | FRC0603F1001TS | Package | 0603 |
| Model Number | FRC0603F1001TS |
The FRC-Series Thick Film Chip Resistor is a compact and lightweight component designed for high reliability and quality. It finds extensive application in various electronic devices, including entertainment systems, appliances, computers, communication equipment, power supplies, illumination equipment, and measuring instruments.
| Type | Rated Power (at 70) | Max. Working Voltage (RCWV) | Max Overload Voltage | T.C.R. (PPM/) | Resistance Range | Zero Ohm Resistance Tolerance | Zero Ohm Rated Current | Zero Ohm Max Current |
|---|---|---|---|---|---|---|---|---|
| 0201 | 1/20W | 25V | 50V | 400 (1~10) 200 (10~10M) | 1~10M | 5% (<50m) | 0.5A | 1A |
| 0402 | 1/16W | 50V | 100V | 200 (1~10) 100 (10~22M) | 1~22M | 5% (<50m) | 1A | 2A |
| 0603 | 1/10W | 75V | 150V | 200 (1~10) 100 (10~22M) | 1~22M | 1% (<30m) 5% (<50m) | 1A | 2A |
| 0805 | 1/8W | 150V | 300V | 200 (1~10) 100 (10~22M) | 1~22M | 1% (<30m) 5% (<50m) | 2A | 5A |
| 1206 | 1/4W | 200V | 400V | 200 (1~10) 100 (10~22M) | 1~22M | 1% (<30m) 5% (<50m) | 2A | 10A |
| 1210 | 1/2W | 200V | 400V | 200 (1~10) 100 (10~22M) | 1~22M | 1% (<30m) 5% (<50m) | 2A | 10A |
| 1218 | 1W | 200V | 500V | 200 (1~10) 100 (10~1M) | 1~1M | 1% (<30m) 5% (<50m) | 6A | 10A |
| 1812 | 3/4W | 200V | 400V | 200 (1~10) 100 (10~10M) | 1~10M | 1% (<30m) 5% (<50m) | 2A | 10A |
| 2010 | 3/4W | 200V | 400V | 200 (1~10) 100 (10~22M) | 1~22M | 1% (<30m) 5% (<50m) | 2A | 10A |
| 2512 | 1W | 200V | 400V | 200 (1~10) 100 (10~22M) | 1~22M | 1% (<30m) 5% (<50m) | 2A | 10A |
| Item | Test Method | Test Condition | Specification |
|---|---|---|---|
| Temperature Coefficient | JIS C 5201 4.8 / IEC60115-1-4.8 | TCR=(R-R0)/(t-t0)R0 10^6 (ppm) R0: resistance at room temperature; R: resistance at 125 or -55; t0: room temperature; t: test temperature (125 or -55) | As SPEC |
| Short-time overload | JIS C 5201 4.13 / IEC60115-1-4.13 | Applied 2.5 times of rated voltage for 5 seconds. Measure the variation of resistance before and after test. | 0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05) |
| Solderability | JIS C 5201 4.17 / IEC60115-1-4.17 | Dip the terminal in a flux and then dip into a soldering bath at 2455 for 30.5 sec. | 95% coverage |
| Resist to soldering heat | JIS C 5201 4.18 / IEC 60115-1-4.18 | Dip the terminal in a flux and then dip into a soldering bath at 2605 for 100.5 sec. Measure the variation of resistance before and after test. | (1.00% +0.05) |
| Insulation resistance | JIS C 5201 4.6 / IEC60115-1-4.6 | Applied the dielectric withstanding voltage on the center of body for 605 seconds. Then measure insulation resistance. | >10G |
| Dielectric withstanding voltage | JIS C 5201 4.7 / IEC60115-1-4.7 | Applied the dielectric withstanding voltage on the center of body for 605 seconds. | No evidence of flashover, arcing or insulation breakdown |
| Terminal bending | JIS C 5201 4.33 / IEC60115-1-4.33 | Specimen shall be mounted on test board, then bend the board and maintained for 201s. Bending distance: 5+0.2/0 mm for resistors 1206, 2+0.2/0 mm for resistors >1206. Measure the variation of resistance before and after test. | (1.00% +0.05) |
| Rapid temperature changes | JIS C 5201 4.19 / IEC60115-1-4.19 | Put specimen in a chamber with temperature cycles: T1: -553; T2: 1553/1253, 30min each, repeated 300 cycles. Measure the variation of resistance before and after test. | 0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05) |
| Humidity | JIS C 5201 4.24 / IEC60115-1-4.24 | Put resistor in a constant temperature and humidity chamber: 402, 90~95 %RH; apply rated voltage for 1.5 hours, then power off for 0.5 hours; repeat power on/off for a total test time of 1000 +48/-0 hours. Measure the variation of resistance before and after test. | (Data truncated in source) |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!