Beijing Silk Road Enterprise Management Services Co., Ltd.
| Power(Watts) | 2W |
| Resistance | 10Ω |
| Voltage Rating | 200V |
| Temperature Coefficient | ±200ppm/℃ |
| Operating Temperature | -55℃~+155℃ |
| Type | Thick Film Resistor |
| Tolerance | ±5% |
| Description | 2W 10Ω 200V ±200ppm/℃ Thick Film Resistor ±5% 2512 Chip Resistor - Surface Mount RoHS |
| Mfr. Part # | FRP2512J100 TS |
| Package | 2512 |
| Model Number | FRP2512J100 TS |
View Detail Information
Explore similar products
High precision Thin Film Chip Resistor EVER OHMS TR0603D10R0P0510Z with stable
Wire Wound Wafer Resistor Huaxing Mechanical-Elec RXM0309-27RJ for Energy Saving
Flat Chip Resistors KOA SG73W2HTTE821K Anti Surge Type Suitable for Reflow and
Metal glaze thick film chip resistor KOA RK73H1ETTP1R65F with excellent weather
Product Specification
| Power(Watts) | 2W | Resistance | 10Ω |
| Voltage Rating | 200V | Temperature Coefficient | ±200ppm/℃ |
| Operating Temperature | -55℃~+155℃ | Type | Thick Film Resistor |
| Tolerance | ±5% | Description | 2W 10Ω 200V ±200ppm/℃ Thick Film Resistor ±5% 2512 Chip Resistor - Surface Mount RoHS |
| Mfr. Part # | FRP2512J100 TS | Package | 2512 |
| Model Number | FRP2512J100 TS |
The FRP Series High Power Thick Film Chip Resistors are designed for applications requiring stable electrical performance and high reliability in a miniature and lightweight package. These resistors are compliant with RoHS directives and halogen-free requirements, making them suitable for a wide range of electronic devices. Their high power handling capability makes them ideal for over-current protection and voltage regulation.
| Type | L (mm) | W (mm) | H (mm) | T1 (mm) | T2 (mm) | Rated Power at 70C | Max Working Voltage | Max Overload Voltage | Resistance Range | Zero Ohm Rated Current | Zero Ohm Max Current | Temperature Coefficient (ppm/C) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0402 | 1.000.05 | 0.500.05 | 0.350.05 | 0.200.10 | 0.250.10 | 1/10W | 50V | 100V | 1-10M | 1A | 3A | 100 (10R1M), 400 (1R10) |
| 0603 | 1.600.10 | 0.800.10 | 0.450.10 | 0.250.15 | 0.250.15 | 1/5W | 75V | 150V | 1-10M | 1A | 4A | 100 (10R1M), 400 (1R10) |
| 0805 | 2.000.10 | 1.250.10 | 0.500.10 | 0.350.20 | 0.400.20 | 1/4W | 150V | 300V | 1-10M | 2A | 5A | 100 (10R1M), 400 (1R10) |
| 1206 | 3.100.10 | 1.600.10 | 0.550.10 | 0.450.20 | 0.450.20 | 1/2W | 200V | 400V | 1-10M | 2A | 10A | 100 (10R1M), 400 (1R10) |
| 1210 | 3.100.10 | 2.500.15 | 0.550.10 | 0.450.15 | 0.500.20 | 3/4W | 200V | 400V | 1-10M | 2A | 10A | 100 (10R1M), 400 (1R10) |
| 1812 | 4.500.20 | 3.100.20 | 0.550.10 | 0.550.20 | 0.700.20 | 1W | 200V | 500V | 1-10M | 2A | 12A | 100 (10R1M), 400 (1R10) |
| 2010 | 5.000.10 | 2.500.15 | 0.550.10 | 0.450.15 | 0.500.20 | 1W | 200V | 400V | 1-10M | 2A | 12A | 100 (10R1M), 400 (1R10) |
| 2512 | 6.350.10 | 3.100.15 | 0.550.10 | 0.600.20 | 0.900.20 | 2W | 200V | 400V | 1-10M | 2A | 12A | 100 (10R1M), 400 (1R10) |
| No. | Construction | Major Material |
|---|---|---|
| 1 | Ceramic substrate | Al2O3 |
| 2 | Conductive layer(Top | Ag |
| 3 | Side conductive layer | NiCr |
| 4 | Resistive layer | RuO2 |
| 5 | Inner protective layer | Glass |
| 6 | Outer Protective layer | Epoxy |
| 7 | Marking | Epoxy |
| 8 | Ni plating layer | Ni |
| 9 | Ni plating layer | Ni |
| 10 | Conductive layer(Back | Ag |
| Item | Test Method | Test Conditions | Specification |
|---|---|---|---|
| Short-time overload | JIS C 5201 4.13 | Applied 5 times of rated power for 5 second. Measure the variation of resistance. | (1.0%+0.05) for 1% tolerance; (2.0%+0.05) for 5% tolerance |
| Solderability | JIS C 5201 4.17 | Dip the terminal in a flux and then dip into a soldering bath at 2455 for 30.5sec. | 95% coverage |
| Resist to soldering heat | JIS C 5201 4.18 | Dip the terminal in a flux and then dip into a soldering bath at 2605 for 100.5sec. Measure the variation of resistance. | (1.00% +0.05) |
| Insulation resistance | JIS C 5201 4.6 | Applied the dielectric withstanding voltage on the center of body for 605seconds. Then measure insulation resistance. | >10G |
| Dielectric withstanding voltage | JIS C 5201 4.7 | Applied the dielectric withstanding voltage on the center of body for 605seconds. | No evidence of flashover, arcing or insulation breakdown |
| Rapid temperature changes | JIS C 5201 4.19 | T1-553T21553/1253, 30min, 300 cycles. Measure the variation of resistance. | (1.0%+0.05) for 1% tolerance; (2.0%+0.05) for 5% tolerance |
| Moisture resistance | MIL-STD-202 METHOD 106 | 10 cycles (25C~65C, 90~100%RH, 2.5H; 65C 90~100%RH, 3H; 65C~25C 80~100%RH, 2.5H). Measurement at 244 hours after test conclusion. | (1.0%+0.05) for 1% tolerance; (2.0%+0.05) for 5% tolerance |
| Terminal bending | JIS C 5201 4.33 | Bend the board for 201s. Bending distance: 5+0.2/0 mm (1206), 2+0.2/0 mm (>1206). Measure the variation of resistance. | (1.00% +0.05) |
| Humidity | JIS C 5201 4.24 | 402, 90~95%RH. Rated voltage ON 1.5H, OFF 0.5H, repeated for 1000+48/-0 H. Measure the variation of resistance. | (1.0%+0.05) for 1% tolerance; (2.0%+0.05) for 5% tolerance |
| Load life | JIS C 5201 4.25.1 | 702. ON TIME:1.5H, OFF TIME:0.5H, Rated voltage for 1000+24/-0H. Measure the variation of resistance. | (1.0%+0.05) for 1% tolerance; (2.0%+0.05) for 5% tolerance |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!