Beijing Silk Road Enterprise Management Services Co., Ltd.
| Power(Watts) | 62.5mW |
| Resistance | 100kΩ |
| Voltage Rating | 50V |
| Temperature Coefficient | ±100ppm/℃ |
| Operating Temperature | -55℃~+155℃ |
| Type | Thick Film Resistor |
| Tolerance | ±1% |
| Description | 100kΩ ±1% 62.5mW 0402 Thick Film Resistor |
| Mfr. Part # | FRC0402F1003TS |
| Package | 0402 |
| Model Number | FRC0402F1003TS |
View Detail Information
Explore similar products
High precision Thin Film Chip Resistor EVER OHMS TR0603D10R0P0510Z with stable
Wire Wound Wafer Resistor Huaxing Mechanical-Elec RXM0309-27RJ for Energy Saving
Flat Chip Resistors KOA SG73W2HTTE821K Anti Surge Type Suitable for Reflow and
Metal glaze thick film chip resistor KOA RK73H1ETTP1R65F with excellent weather
Product Specification
| Power(Watts) | 62.5mW | Resistance | 100kΩ |
| Voltage Rating | 50V | Temperature Coefficient | ±100ppm/℃ |
| Operating Temperature | -55℃~+155℃ | Type | Thick Film Resistor |
| Tolerance | ±1% | Description | 100kΩ ±1% 62.5mW 0402 Thick Film Resistor |
| Mfr. Part # | FRC0402F1003TS | Package | 0402 |
| Model Number | FRC0402F1003TS |
The FRC-Series Thick Film Chip Resistor is designed for a wide range of electronic applications, offering small size, light weight, and high reliability. It is suitable for entertainment systems, appliances, computers, communication equipment, power supplies, and measuring instruments.
| Type | Rated Power (at 70) | Max. Working Voltage (RCWV) | Max. Overload Voltage | Resistance Range | T.C.R. (PPM/) | Dimensions (L x W x H) | Rated Current of Jumper | Max Current of Jumper |
|---|---|---|---|---|---|---|---|---|
| 0201 | 1/20W | 25V | 50V | 1~10, 10~10M | 400 (1~10), 200 (10~10M) | 0.600.03 x 0.300.03 x 0.230.03 mm | 0.5A | 1A |
| 0402 | 1/16W | 50V | 100V | 1~10, 10M~22M | 200 (1~10), 100 (10~10M) | 1.000.05 x 0.500.05 x 0.350.05 mm | 1A | 2A |
| 0603 | 1/10W | 75V | 150V | 1~10, 10M~22M | 200 (1~10), 100 (10~10M) | 1.600.10 x 0.800.10 x 0.450.10 mm | 1A | 2A |
| 0805 | 1/8W | 150V | 300V | 1~10, 10M~22M | 200 (1~10), 100 (10~10M) | 2.000.10 x 1.250.10 x 0.500.10 mm | 2A | 5A |
| 1206 | 1/4W | 200V | 400V | 1~10, 10M~22M | 200 (1~10), 100 (10~10M) | 3.100.10 x 1.600.10 x 0.550.10 mm | 2A | 10A |
| 1210 | 1/2W | 200V | 400V | 1~10, 10M~22M | 200 (1~10), 100 (10~10M) | 3.100.10 x 2.500.15 x 0.550.10 mm | 2A | 10A |
| 1218 | 1W | 200V | 500V | 1~10, 10~1M | 200 (1~10), 100 (10~1M) | 3.100.10 x 4.600.10 x 0.550.10 mm | 6A | 10A |
| 1812 | 3/4W | 200V | 400V | 1~10, 10~10M | 200 (1~10), 100 (10~10M) | 4.500.20 x 3.100.20 x 0.550.10 mm | 2A | 10A |
| 2010 | 3/4W | 200V | 400V | 1~10, 10M~22M | 200 (1~10), 100 (10~10M) | 5.000.10 x 2.500.15 x 0.550.10 mm | 2A | 10A |
| 2512 | 1W | 200V | 400V | 1~10, 10M~22M | 200 (1~10), 100 (10~10M) | 6.350.10 x 3.100.15 x 0.550.10 mm | 2A | 10A |
| Item | Test Method | Test Condition | Specification |
|---|---|---|---|
| Temperature Coefficient | JIS C 5201 4.8 / IEC60115-1-4.8 | TCR=R-R0 /t-t0R0 106ppm R0: resistance at room temperature; R: resistance at 125 or -55; t0: room temperature; t: test temperature (125 or -55) | As SPEC |
| Short-time overload | JIS C 5201 4.13 / IEC60115-1-4.13 | Applied 2.5 times of rated voltage for 5 seconds. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05); 5%: (2.0%+0.05) |
| Solderability | JIS C 5201 4.17 / IEC60115-1-4.17 | Dip the terminal in a flux and then dip into a soldering bath at 2455 for 30.5sec. | 95% coverage |
| Resist to soldering heat | JIS C 5201 4.18 / IEC 60115-1-4.18 | Dip the terminal in a flux and then dip into a soldering bath at 2605 for 10 0.5sec. Measure the variation of resistance. | (1.00% +0.05) |
| Insulation resistance | JIS C 5201 4.6 / IEC60115-1-4.6 | Applied the dielectric withstanding voltage on the center of body for 605 seconds. Then measure insulation resistance. | >10G |
| Dielectric withstanding voltage | JIS C 5201 4.7 / IEC60115-1-4.7 | Applied the dielectric withstanding voltage on the center of body for 605 seconds. | No evidence of flashover, arcing or insulation breakdown |
| Terminal bending | JIS C 5201 4.33 / IEC60115-1-4.33 | Specimen shall be mounted on test board, then bend the board and maintained for 201s. Bending distance: 5+0.2/0 mm (size 1206) or 2+0.2/0 mm (size > 1206). Measure the variation of resistance. | (1.00% +0.05) |
| Rapid temperature changes | JIS C 5201 4.19 / IEC60115-1-4.19 | Put specimen in a chamber: T1: -553; T2: 1553/1253, 30min, repeated 300 cycles. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05); 5%: (2.0%+0.05) |
| Humidity | JIS C 5201 4.24 / IEC60115-1-4.24 | Temperature 402, humidity 90~95 %RH; apply rated voltage 1.5 hours, power off 0.5 hours; repeat power on/off for 1000 +48/-0 hours. Measure the variation of resistance. | (Data truncated in source) |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!