Beijing Silk Road Enterprise Management Services Co., Ltd.
| Power(Watts) | 100mW |
| Resistance | 10kΩ |
| Voltage Rating | 75V |
| Operating Temperature | -55℃~+155℃ |
| Type | Thick Film Resistor |
| Temperature Coefficient | ±200ppm/℃ |
| Tolerance | ±5% |
| Description | 100mW 10kΩ 75V Thick Film Resistor ±200ppm/℃ ±5% 0603 Chip Resistor - Surface Mount RoHS |
| Mfr. Part # | SCR0603J10K |
| Package | 0603 |
| Model Number | SCR0603J10K |
View Detail Information
Explore similar products
High precision Thin Film Chip Resistor EVER OHMS TR0603D10R0P0510Z with stable
Wire Wound Wafer Resistor Huaxing Mechanical-Elec RXM0309-27RJ for Energy Saving
Flat Chip Resistors KOA SG73W2HTTE821K Anti Surge Type Suitable for Reflow and
Metal glaze thick film chip resistor KOA RK73H1ETTP1R65F with excellent weather
Product Specification
| Power(Watts) | 100mW | Resistance | 10kΩ |
| Voltage Rating | 75V | Operating Temperature | -55℃~+155℃ |
| Type | Thick Film Resistor | Temperature Coefficient | ±200ppm/℃ |
| Tolerance | ±5% | Description | 100mW 10kΩ 75V Thick Film Resistor ±200ppm/℃ ±5% 0603 Chip Resistor - Surface Mount RoHS |
| Mfr. Part # | SCR0603J10K | Package | 0603 |
| Model Number | SCR0603J10K |
This document specifies the SCR series of lead-free, halogen-free thick film chip resistors. These are general-purpose resistors designed for a wide range of applications. The lead-free designation refers to the terminal electrodes and complies with RoHS requirements, with lead present in the resistive layer glass material being exempt under RoHS.
| Type | Rated Power | Max. Rated Voltage | Max. Overload Voltage | T.C.R (ppm/) | Resistance Range (F/D 1%/0.5%) | Resistance Range (J 5%) | JUMPER (0) Resistance | Operating Temperature Range |
|---|---|---|---|---|---|---|---|---|
| 0201 | 1/8W | 25V | 50V | 400 | 1R9.1 | 1R9.1 | 50m MAX. | -55~ +125 |
| 0402 | 1/8W | 50V | 100V | 100 | 10R1M | --- | 50m MAX. | -55~ +155 |
| 0603 | 1/10W | 75V | 150V | 100 | 10R1M | --- | 50m MAX. | -55~ +155 |
| 0805 | 1/8W | 150V | 300V | 100 | 10R1M | --- | 50m MAX. | -55~ +155 |
| 1206 | 1/4W | 200V | 400V | 100 | 10R1M | --- | 50m MAX. | -55~ +155 |
| 1210 | 1/2W | 200V | 400V | 100 | 10R1M | --- | 50m MAX. | -55~ +155 |
| 2010 | 3/4W | 200V | 400V | 100 | 10R1M | --- | 50m MAX. | -55~ +155 |
| 2512 | 1W | 200V | 400V | 100 | 10R1M | --- | 50m MAX. | -55~ +155 |
| Type | L (mm) | W (mm) | H (mm) | L1 (mm) | L2 (mm) |
|---|---|---|---|---|---|
| 0201 | 0.600.03 | 0.30.03 | 0.230.03 | 0.100.05 | 0.150.05 |
| 0402 | 1.000.10 | 0.500.05 | 0.300.05 | 0.200.10 | 0.250.10 |
| 0603 | 1.600.10 | 0.800.10 | 0.450.10 | 0.300.15 | 0.250.15 |
| 0805 | 2.000.10 | 1.250.10 | 0.500.10 | 0.350.20 | 0.350.20 |
| 1206 | 3.050.10 | 1.550.10 | 0.500.10 | 0.450.20 | 0.400.20 |
| 1210 | 3.050.10 | 2.600.15 | 0.550.10 | 0.450.20 | 0.500.20 |
| 2010 | 5.000.10 | 2.500.15 | 0.550.10 | 0.450.20 | 0.500.20 |
| 2512 | 6.350.10 | 3.100.15 | 0.550.10 | 0.600.20 | 0.500.20 |
| Test Item | Conditions | Specifications |
|---|---|---|
| Temperature Coefficient of Resistance | (R2-R1)/R1(T2-T1)10^6; R1: Room temp resistance; R2: -55 or +125 resistance; T1: Room temp; T2: -55 or +125 | According to JIS-C5201-1 4.8 |
| Short Time Overload | Apply 2.5x rated voltage for 5 sec, rest 30 min, measure resistance change. | Resistance change: 0.5%/1%: (1.0%+0.05); 5%: (2.0%+0.10). Appearance: No damage, short circuit, or burn. |
| Intermittent Overload | 1 sec ON, 25 sec OFF, 10000+400/-0 cycles at 2.5x rated voltage, rest 60 min, measure resistance change. | Resistance change: 1: (5.0%+0.10); <1: (5.0%+0.001). Appearance: No damage, short circuit, or burn. |
| Terminal Strength (Pull Test) | Test 1: Apply 5N force for 10 sec on back of resistor soldered to PCB. Test 2: Gradually apply force to back of resistor to find max peel strength. | Test 1: No damage, no side conductor detachment, no body fracture. Test 2: Pull force 5N. |
| Resistance to Solvent | Immerse in isopropyl alcohol (20-25) for 50.5 min, rest 48 hr, measure resistance change. | Resistance change: 1: (1.0%+0.05). Appearance: No damage, no G2 protective layer or tin layer leaching. |
| Solderability | Pre-treatment: 4 hr aging at 105, 100% RH, 1.2210^5 Pa. Immerse in 2355 tin bath for 2 sec. Observe under microscope. | Solder coverage area >95%. |
| Resistance to Soldering Heat | Test 1: Immerse in 260+5/-0 tin bath for 10 sec+1/-0, rest 60 min, measure resistance change. Test 2: Immerse in 260+5/-0 tin bath for 30 sec+1/-0, wash, observe solder coverage. Test 3: Soldering iron at 35010 for 3 sec on electrodes, rest 60 min, measure resistance change. | Test 1 & 3: Resistance change: 1: (1.0%+0.05). Appearance: No electrode abnormality, no side conductor detachment. Test 2: Solder coverage >95%. No underlying material visible at electrode edge. |
| Bending Test | Solder resistor to bending test board, apply downward force at center. Depth: 0201/0402=5mm, 0603/0805=3mm, 1206+=2mm. | Resistance change: 1: (1.0%+0.05). Appearance: No damage, no side conductor detachment, no body fracture. |
| Resistance to Dry Heat | 1000+48/-0 hrs at 1555 (1253 for RTT01), rest 1 hr, measure resistance change. | Resistance change: 0.1%,0.5%,1%: (1.0%+0.05); 2%,5%: (2.0%+0.10). Appearance: No damage, short circuit, or burn. |
| Thermal Shock | Cycle: -55 (15 min) to +125 (15 min), 300 cycles. Rest 60 min, measure resistance change. | Resistance change: 0.1%,0.5%,1%: (1.0%+0.05); 2%,5%: (2.0%+0.05). Appearance: No damage, short circuit, or burn. |
| Moisture Load Life | 402, 90-95% RH, 90 min ON, 30 min OFF, 1000 hrs. Rest 60 min, measure resistance change. | Resistance change: 1%: (1.0%+0.05); 5%: (2.0%+0.10). Appearance: No damage, short circuit, or burn. |
| Load Life | 702, 90 min ON, 30 min OFF, 1000 hrs, apply rated voltage. Rest 60 min, measure resistance change. | Resistance change: 1%: (1.0%+0.05); 5%: (2.0%+0.10). Appearance: No damage, short circuit, or burn. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!