Beijing Silk Road Enterprise Management Services Co., Ltd.
| Power(Watts) | 100mW |
| Resistance | 6.65kΩ |
| Voltage Rating | 75V |
| Operating Temperature | -55℃~+155℃ |
| Type | Thick Film Resistor |
| Temperature Coefficient | ±100ppm/℃ |
| Tolerance | ±1% |
| Description | 100mW 6.65kΩ 75V Thick Film Resistor ±100ppm/℃ ±1% 0603 Chip Resistor - Surface Mount RoHS |
| Mfr. Part # | SCR0603F6K65 |
| Package | 0603 |
| Model Number | SCR0603F6K65 |
View Detail Information
Explore similar products
High precision Thin Film Chip Resistor EVER OHMS TR0603D10R0P0510Z with stable
Wire Wound Wafer Resistor Huaxing Mechanical-Elec RXM0309-27RJ for Energy Saving
Flat Chip Resistors KOA SG73W2HTTE821K Anti Surge Type Suitable for Reflow and
Metal glaze thick film chip resistor KOA RK73H1ETTP1R65F with excellent weather
Product Specification
| Power(Watts) | 100mW | Resistance | 6.65kΩ |
| Voltage Rating | 75V | Operating Temperature | -55℃~+155℃ |
| Type | Thick Film Resistor | Temperature Coefficient | ±100ppm/℃ |
| Tolerance | ±1% | Description | 100mW 6.65kΩ 75V Thick Film Resistor ±100ppm/℃ ±1% 0603 Chip Resistor - Surface Mount RoHS |
| Mfr. Part # | SCR0603F6K65 | Package | 0603 |
| Model Number | SCR0603F6K65 |
This document specifies the SCR series lead-free, halogen-free thick film chip resistors. These are general-purpose resistors designed for a wide range of applications. The resistors are manufactured to meet RoHS requirements, with lead in the resistive layer glass material being exempt.
| Type | Size | Tolerance | Resistance Range | Rated Power (W) | Max. Rated Voltage (V) | Max. Overload Voltage (V) | T.C.R (ppm/) | Operating Temp. Range | JUMPER (0) Resistance |
|---|---|---|---|---|---|---|---|---|---|
| SCR 0402 | 0402 | J (5%) | 1R9.1 (E-24) | 1 | 50 | 100 | 400 | -55~ +155 | 50m MAX. |
| SCR 0402 | 0402 | F (1%) / D (0.5%) | 10R10M (E-24, E-96) | 1 | 50 | 100 | 100 | 50m MAX. | |
| SCR 0603 | 0603 | J (5%) | 1R9.1 (E-24) | 1 | 75 | 150 | 400 | -55~ +155 | 50m MAX. |
| SCR 0603 | 0603 | F (1%) / D (0.5%) | 10R10M (E-24, E-96) | 1 | 75 | 150 | 100 | 50m MAX. | |
| SCR 0805 | 0805 | J (5%) | 1R9.1 (E-24) | 1 | 150 | 300 | 400 | -55~ +155 | 50m MAX. |
| SCR 0805 | 0805 | F (1%) / D (0.5%) | 10R10M (E-24, E-96) | 1 | 150 | 300 | 100 | 50m MAX. | |
| SCR 1206 | 1206 | J (5%) | 1R9.1 (E-24) | 1 | 200 | 400 | 400 | -55~ +155 | 50m MAX. |
| SCR 1206 | 1206 | F (1%) / D (0.5%) | 10R10M (E-24, E-96) | 1 | 200 | 400 | 100 | 50m MAX. | |
| SCR 1210 | 1210 | J (5%) | 1R9.1 (E-24) | 1 | 200 | 400 | 400 | -55~ +155 | 50m MAX. |
| SCR 1210 | 1210 | F (1%) / D (0.5%) | 10R10M (E-24, E-96) | 1 | 200 | 400 | 100 | 50m MAX. | |
| SCR 2010 | 2010 | J (5%) | 1R9.1 (E-24) | 3 | 200 | 400 | 400 | -55~ +155 | 50m MAX. |
| SCR 2010 | 2010 | F (1%) / D (0.5%) | 10R10M (E-24, E-96) | 3 | 200 | 400 | 100 | 50m MAX. | |
| SCR 2512 | 2512 | J (5%) | 1R9.1 (E-24) | 1 | 200 | 400 | 400 | -55~ +155 | 50m MAX. |
| SCR 2512 | 2512 | F (1%) / D (0.5%) | 10R10M (E-24, E-96) | 1 | 200 | 400 | 100 | 50m MAX. |
| Type | L (mm) | W (mm) | H (mm) | L1 (mm) | L2 (mm) |
|---|---|---|---|---|---|
| 0201 | 0.600.03 | 0.30.03 | 0.230.03 | 0.100.05 | 0.150.05 |
| 0402 | 1.000.10 | 0.500.05 | 0.300.05 | 0.200.10 | 0.250.10 |
| 0603 | 1.600.10 | 0.800.10 | 0.450.10 | 0.300.15 | 0.250.15 |
| 0805 | 2.000.10 | 1.250.10 | 0.500.10 | 0.350.20 | 0.350.20 |
| 1206 | 3.050.10 | 1.550.10 | 0.500.10 | 0.450.20 | 0.400.20 |
| 1210 | 3.050.10 | 2.600.15 | 0.550.10 | 0.450.20 | 0.500.20 |
| 2010 | 5.000.10 | 2.500.15 | 0.550.10 | 0.450.20 | 0.500.20 |
| 2512 | 6.350.10 | 3.100.15 | 0.550.10 | 0.600.20 | 0.500.20 |
| Test Item | Conditions | Specifications |
|---|---|---|
| Temperature Coefficient of Resistance (TCR) | Measured at -55 or +125 relative to room temperature. | Refer to 3. Specification Table |
| Short Time Overload | Applied 2.5 times rated voltage for 5 seconds, rest 30 minutes. | Resistance change rate: 0.5%/1%: (1.0%+0.05); 5%: (2.0%+0.10). Appearance: No damage, short circuit or burnout. |
| Intermittent Overload | 2.5x rated voltage, 1s ON, 25s OFF, 10000 cycles. | Resistance change rate: 1: (5.0%+0.10); <1: (5.0%+0.001). Appearance: No damage, short circuit or burnout. |
| Terminal Strength | Test 1: 5N force applied to back of resistor for 10 sec. Test 2: Gradually apply force to back of resistor. | Test 1: No damage, no side conductor detachment, no body fracture. Test 2: Pull force 5N. |
| Resistance to Solvent | Immersed in Isopropyl alcohol at 20~25 for 50.5 min, rest 48 hr. | Resistance change rate: (1.0%+0.05). Appearance: No damage, no G2 protective layer or tin layer leaching. |
| Solderability | Pre-treatment: PCT machine at 105, 100% RH, 1.22105 pa for 4 hours. Immerse in 2355 furnace for 2 seconds. | Soldered area > 95%. |
| Resistance to Soldering Heat | Test 1 (Solder pot): Immerse in 260+5/-0 for 10 sec, rest 60 min. Test 2 (Solder pot): Immerse in 260+5/-0 for 30 sec. Test 3 (Soldering iron): 35010 for 3 sec. | Test 1: Resistance change rate: 1: (1.0%+0.05); Electrode appearance: No abnormality, no side conductor detachment. Test 2: Soldered area > 95%; No underlying material visible at electrode edge. Test 3: Resistance change rate: 1: (1.0%+0.05); Electrode appearance: No abnormality, no side conductor detachment. |
| Bending Test | Weld resistor on bending test board, apply force to center. Downward depth: 0201/0402=5mm, 0603/0805=3mm, 1206+=2mm. | Resistance change rate: 1: (1.0%+0.05). Appearance: No damage, no side conductor detachment, no body fracture. |
| Resistance to Dry Heat | Oven at 1555 for 1000 hrs (RTT01 at 1253). | Resistance change rate: 0.1%/0.5%/1%: (1.0%+0.05); 2%/5%: (2.0%+0.10). Appearance: No damage, short circuit, or burnout. |
| Thermal Shock | -55 for 15 min, +125 for 15 min, 300 cycles. | Resistance change rate: 0.1%/0.5%/1%: (1.0%+0.05); 2%/5%: (2.0%+0.05). Appearance: No damage, short circuit, or burnout. |
| Moisture Load Life | 402, 90~95% RH, 90 min ON, 30 min OFF, 1000 hrs. | Resistance change rate: 1%: (1.0%+0.05); 5%: (2.0%+0.10). Appearance: No damage, short circuit, or burnout. |
| Load Life | 702 oven, 90 min ON, 30 min OFF, 1000 hrs. | Resistance change rate: 1%: (1.0%+0.05); 5%: (2.0%+0.10). Appearance: No damage, short circuit, or burnout. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!