Beijing Silk Road Enterprise Management Services Co., Ltd.
| Voltage Rating | 20V |
| Tolerance | ±20% |
| Power(Watts) | 50mW |
| Resistance | 10kΩ |
| Description | 10kΩ Through Hole Potentiometers, Variable Resistors |
| Mfr. Part # | R09720NS-FB15A7.0-B103-0044 |
| Package | Through Hole |
| Model Number | R09720NS-FB15A7.0-B103-0044 |
View Detail Information
Explore similar products
Amphenol PT6KH 103B2020 6 mm carbon trimmer potentiometer offering up to 10000
Durable shaftless potentiometer Amphenol PTC15NV02-104A2020 with 15mm size and
Multiturn cermet trimpot potentiometer BOURNS 3224W-1-500E with RoHS compliance
4MM Surface Mount Glazed Preset Potentiometer BOCHEN 3224X-1-103E Featuring 0
Product Specification
| Voltage Rating | 20V | Tolerance | ±20% |
| Power(Watts) | 50mW | Resistance | 10kΩ |
| Description | 10kΩ Through Hole Potentiometers, Variable Resistors | Mfr. Part # | R09720NS-FB15A7.0-B103-0044 |
| Package | Through Hole | Model Number | R09720NS-FB15A7.0-B103-0044 |
This document details the specifications for the 33529/6+((7 potentiometer, designed for various electronic applications. It offers a total resistance range, specific resistance tapers, and includes optional switch functionalities. The product adheres to RoHS directives and is manufactured by DONG GUAN CHANG TAI ER ELECTRONIC., LTD.
| Section | Parameter | Specification | Notes |
|---|---|---|---|
| 1. General Information | Applicable models | R095, R096, R097, R098, R09J, R09P, R09B | |
| Usage environment temperature | -10C to 70C | ||
| Storage environment temperature | 0C to 85C | ||
| Test condition | Temperature: 5~35C, Moisture: 45~85%HR | ||
| 1. General Information | Soldering heat-resistance | 1. Soldering iron Max, 350C5C at 3 sec 2. Auto soldering 260C5C max. at 3 Sec. Preheating temperature of board surface: 100C max. at within 1 minutes. 3. To guarantee the above process at 1 or 2 times. | |
| Country of origin | China | ||
| Environmental requisition | RoHS compliant | ||
| 2. Construction | Appearance | Every part should be finished, not exist rust flaw, crack and bad plating | |
| Measurements | Under conditions prescribed by design drawing. | ||
| 3. Mechanical characteristics | Total rotational angle | 30010 | |
| Rotational torque | 10~200gf.cm | Rotational velocity : 60/sec | |
| Detent torque | 80~250gf.cm | ||
| Rotational stopper strength | 1 Kgf.cm, 4Kgf.cm, 5Kgf.cm | ||
| 3. Mechanical characteristics | Pull-Push Strength of Shaft | 8Kgf, 10Kgf | |
| 3. Mechanical characteristics | Nut tightening strength | 10Kgf.cm | |
| 3. Mechanical characteristics | Shaft wobble | On the tip of the single shaft exert 250gf, Shaft radial deviant be smaller than: 0.7*shaft long L size/20mm | |
| 4. Electrical characteristics | Total resistance | 10% | |
| Resistance taper | A, B, C | ||
| End resistance (Terminal :1-2, 2-3) | R10K: 10, 10K>R250K: 20, R<250K: 0.1%R | ||
| Ratings power | B Taper: 0.05W, Other taper: 0.025W | ||
| 4. Electrical characteristics | Maximum operating voltage | B Taper: 20V DC or 50V AC, Other taper: 12V DC or 25V AC | |
| Slider noise | 100mV | ||
| 4. Electrical characteristics | Gang error | 4dB (-40dB~0dB) | *Apply the Dual-Unit only |
| 4. Electrical characteristics | Insulation resistance | 100M at 250V DC | |
| 4. Electrical characteristics | Voltage proof | 300V AC for 1 Minute | |
| 4. Electrical characteristics | Rotational life | 10,000 cycles, 15,000 cycles, 30,000 cycles | On the without load status according to the 600 r./h rotation, permissible resistance change 15% |
| 5. Switch characteristics | Apply | Yes / No | |
| Switch type | Rotate type, Push-Push type | ||
| Switch circuit | S.P.S.T | ||
| Switch ratings power | Rotate switch: 12V DC 1A, Push-Push switch: 12V DC 0.5A | ||
| 5. Switch characteristics | Switch contact resistance | Initial stage: 100 m, after 10,000 cycles: 1 max. | |
| Switch working angle or track | Rotate switch: 5010, Push-Push switch track: 0.5mm or 1.5mm | specific reference to the drawing | |
| Switch working torque | Rotate switch: 800gf.cm, Push-Push switch: 7020gf | ||
| 6. Waterproof characteristics | Waterproof standard | Grade -7 of Waterproof standard | Potentiometers Shaft and Bush in 1M deep of water, other component sealed after be exposed to the standard atmosphere, after 30 minutes no water into the Potentiometer inner. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!