Beijing Silk Road Enterprise Management Services Co., Ltd.
| Operating Temperature | -40℃~+105℃ |
| Lifetime | 3000hrs@105℃ |
| Capacitance | 47uF |
| Height - Seated (Max) | 16mm |
| Voltage Rating | 100V |
| Pin Spacing | 3.5mm |
| Diameter | 8mm |
| Equivalent Series Resistance(ESR) | - |
| Tolerance | ±20% |
| Ripple Current | 360mA@100kHz |
| Description | 47uF 100V Aluminum Electrolytic Capacitors Through Hole,D8xL16mm 3000hrs@105℃ |
| Mfr. Part # | KF470M100F160A |
| Package | Through Hole,D8xL16mm |
| Model Number | KF470M100F160A |
View Detail Information
Explore similar products
High Temperature Aluminum Electrolytic Capacitor Chengx KM228M010G17RR0VH2FP0
V chip Aluminum Electrolytic Capacitors Chengx RVT1E221M0810 Rated 105C with
aluminum electrolytic capacitor HRK 400V10uF CD110 with rated voltage 400 volts
Low Impedance Surface Mount Capacitor JARSON RX1E221M0607 with 6.3 Volt Rated
Product Specification
| Operating Temperature | -40℃~+105℃ | Lifetime | 3000hrs@105℃ |
| Capacitance | 47uF | Height - Seated (Max) | 16mm |
| Voltage Rating | 100V | Pin Spacing | 3.5mm |
| Diameter | 8mm | Equivalent Series Resistance(ESR) | - |
| Tolerance | ±20% | Ripple Current | 360mA@100kHz |
| Description | 47uF 100V Aluminum Electrolytic Capacitors Through Hole,D8xL16mm 3000hrs@105℃ | Mfr. Part # | KF470M100F160A |
| Package | Through Hole,D8xL16mm | Model Number | KF470M100F160A |
Product Overview
The CapXon KF Series Aluminum Electrolytic Capacitors are designed for reliable performance in a wide range of electronic applications. These capacitors offer stable electrical characteristics, robust construction, and adherence to international quality standards. They are suitable for general-purpose use and are manufactured in compliance with environmental regulations. The series features a PET sleeve for marking and protection, and a safety vent mechanism for enhanced operational safety.
Model: KF470M100F160A
Description: 47F / 100V
| Part Number | Capacitance (F) | Capacitance Tolerance (%) | Rated Working Voltage (VDC) | Surge Voltage (VDC) | Max. Dissipation Factor (%) | Ripple Current (mA) @ 100kHz /105 | Max. Leakage Current (A) | Max. Impedance () @ 100kHz /20 | Operating Temperature (C) | Case Size (D* L) (mm) | Endurance /105 (Hrs) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| KF470M100F160A | 47 | -20~20 | 100 | 115 | 8 | 360 | 47 | 0.58 | -40~105 | 8X16 | 3000 |
| Parameter | Value (mm) |
|---|---|
| D (Diameter) | 8 |
| L (Length) | 16 |
| F (Lead Spacing) | 3.5 |
| d (Lead Diameter) | 0.5 |
| Component | Meaning |
|---|---|
| KF | Series Type |
| 470 | Capacitance (47F) |
| M | Capacitance Tolerance (-20~20%) |
| 100 | Voltage (100V) |
| F | Case Diameter (8mm) |
| 160 | Case Length (16mm) |
| A | Lead Treatment (PET Sleeve) |
| Location | Marking | Description |
|---|---|---|
| Front | CapXon | Brand |
| 100V | Rated Voltage | |
| 47F | Nominal Capacitance | |
| (-) | Polarity (Cathode Indicate) | |
| 105 | Maximum Operating Temperature | |
| KF | Series | |
| P1502 | Production Cycle (P:PET, 15:Year 2015, 02:Week 2) | |
| Back | VENT | Safety Vent (conditional marking based on size) |
| No. | Item | Conditions & Criterion |
|---|---|---|
| 1 | Range of Working Temperature | -40~105 (C) |
| 2 | Capacitance | Measurement Temp: 202C, Frequency: 120Hz, Voltage: 0.5Vrms. Tolerance: -20~20% |
| 3 | Dissipation Factor (tan) | Measurement Temp: 202C, Frequency: 120Hz, Voltage: 0.5Vrms. See Table 1 for Max. DF. |
| 4 | Leakage Current | Rated voltage applied for 2 min. Criterion: I 47 (A) |
| 5 | Terminal Strength | Tensile & Bending strength specified in datasheet. Terminal should not be loose, breakage, or bad connected. |
| 6 | Temperature Characteristic | Impedance ratio must not exceed values in Table 2. LC 800% of initial specified value. |
| 7 | High Temperature Load | Test Conditions: 105C, Rated DC working voltage, 3000 H. Criterion: Capacitance Change: 20%, DF 200% of spec, LC spec, No visible damage. |
| 8 | High Temperature Exposure (Storage) | Test Conditions: 105C, No voltage, 1000 H. Criterion: Capacitance Change: 20%, DF 200% of spec, LC spec, No visible damage. |
| 9 | Surge Test | Test Conditions: 15~35C, 115V (30s charge, 330s discharge cycle for 1000 cycles). Criterion: Capacitance Change: 15%, DF spec, LC spec, No visible damage. |
| 10 | Vibration | Test Conditions: 10~55Hz, 0.75mm amplitude, 98 m/s (10g) for 6 hours (X,Y,Z directions). Criterion: Capacitance Change: 5%, DF spec, LC spec, No visible damage. |
| 11 | Solderability | Solder Temp: 2455C, Immerse time: 2.00.5S. Criterion: New solder coverage > 95%. |
| 12 | Resistance to Soldering Heat | Solder Temp: 2600~3C, Immerse time: 101S. Criterion: Capacitance Change: 5%, DF spec, LC spec. |
| 13 | Vent Test (for products with vent requirement) | Reverse Voltage: 80V. Criterion: No explosion, flash, flame, spark, or fire when vent operates. |
| 14 | Temperature Cycling | 10 cycles as per JIS-C-5101-1 (2010) No:4.16. Criterion: Capacitance Change: 5%, DF spec, LC spec, No visible damage. |
| 15 | High Temp and Humidity | Test Conditions: 402C, 90~95%RH, 500H. Criterion: Capacitance Change: 10%, DF 1.2 times spec, LC spec, No visible damage. |
| Rated Voltage (VDC) | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 | 160 | 200 | 250 | 350 | 400 | 420 | 450 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| D.F. (%)max. | 18 | 16 | 14 | 12 | 10 | 9 | 8 | 8 | 12 | 12 | 12 | 15 | 15 | 17 | 17 |
For capacitance >1000F, add 2% per another 1000F.
| Rated Voltage (VDC) | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 | 160 | 200 | 250 | 350 | 400 | 450 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Z-25Z+20 | 4 | 3 | 3 | 3 | 3 | 3 | 2 | 2 | 2 | 2 | 3 | 5 | 5 | 6 |
| Z-40Z+20 | 8 | 6 | 4 | 3 | 3 | 3 | 3 | 3 | 3 | 6 | 6 | 6 | 6 | - |
For capacitance >1000F, add 0.5 per another 1000F for -25/+20; add 1 per another 1000F for -40/+20.
| CAP(F)Frequency(Hz) | 50(60) | 120 | 400 | 1K | 10K | 50K~100K |
|---|---|---|---|---|---|---|
| 0.47 | 0.59 | 0.76 | 0.85 | 0.97 | 1.0 | |
| CAP10 | 0.47 | 0.59 | 0.76 | 0.85 | 0.97 | 1.0 |
| 10CAP100 | 0.52 | 0.62 | 0.80 | 0.89 | 0.97 | 1.0 |
| 100CAP1000 | 0.58 | 0.72 | 0.84 | 0.90 | 0.98 | 1.0 |
| 1000CAP | 0.63 | 0.78 | 0.87 | 0.91 | 0.98 | 1.0 |
Important Notes:
1. Specifications and descriptions are subject to change without notice.
2. Operating conditions may affect capacitor lifetime; consult Capxon for lifetime calculations.
3. For aerospace, military, life-saving, or life-sustaining applications, consult Capxon before design-in.
4. Buyers are responsible for ensuring Capxon products are suitable for their intended applications.
5. Capxon disclaims all warranties not expressly stated in writing.
6. Further information is available on www.capxongroup.com.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
.gtr-container-9k2l8p { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; box-sizing: border-box; max-width: 100%; } .gtr-container-9k2l8p-header { margin-bottom: 20px;... .gtr-container-9k2l8p { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; box-sizing: border-box; max-width: 100%; } .gtr-container-9k2l8p-header { margin-bottom: 20px;...
Get in touch with us
Leave a Message, we will call you back quickly!