Snap In Aluminum Electrolytic Capacitor CapXon HP471M250N300AP4 Rated Voltage

Product Specification

CapXon HP Series Aluminum Electrolytic Capacitors

Product Overview

The CapXon HP Series is an economy, standard-size aluminum electrolytic capacitor designed for general applications. Featuring a snap-in type design, these capacitors offer high endurance at 105C with a useful life of 2,000 hours at 105C (rated voltage and ripple current applied). They provide a wide capacitance range and small dimensions, making them suitable for applications not requiring 24-hour continuous operation.

Product Attributes

• Brand: CapXon
• Series: HP Series
• Type: Aluminum Electrolytic Capacitor
• Termination: Snap-In
• Endurance: 105C
• Certifications: IEC 60068-2-6 (Vibration Resistance Test)

Technical Specifications

Standard Ratings

Multiplier (Kf) for Ripple Current vs. Frequency

Dimensions

All dimensions in mm.

2-pin version: Standard type

3-pin version: Polarity protection

Multipin version: Diameter D 30 mm

Further possible terminal styles can be found in our packaging information.

Precautions, Guidelines and Packaging Information

Unless otherwise agreed in individual specifications, all products are subject to our General Precautions and Guidelines as well as our Packaging Information. Please refer to the following links in the table.

• General Precautions & Guidelines
• Packaging Information
• Vibration Test Profiles
• 3D Models
• Reliability Tests

Useful Life

VR 100V: Test 3,000 hours (VR & IR applied)

VR 160V: Test 5,000 hours (VR & IR applied)

With: IA: Application current, IR: Rated ripple current (A RMS), TA: Application temperature of the capacitor.

Disclaimer

All product related data (e.g. specification, statements and general information) are subject to change without any notice. It is necessary that the customer observes all product related technical / application information and handling instructions. CapXon products are designed and manufactured according to severe quality and safety standards. Under no circumstance, CapXon warrants that any CapXon product is suitable for the purposes intended for your application, even CapXon knows the application. It is customer's duty and obligation to check and make sure that CapXon products are suitable for the purposes intended and select the correct and proper CapXon product. Customers are requested to perform a sufficient validation and reliability evaluation to assure needed safety level and reliability performance by suitable designs and to apply proper safeguards (e.g. redundancies, protective circuits). Particular operating conditions (ambient temperature, ripple current, voltage, thermal resistance, etc.) as well as storage, production or assembly may affect the performance and the lifetime of the capacitor. Please consult CapXon for lifetime estimation, failure mode considerations or worst-case scenarios according to the product technology, product tolerances / deviations or change of the characteristics of the capacitor due to shipment, storage, handling, production and usage. For aerospace or military application, lifesaving, lifesustaining, safety critical applications or any application where failure may cause severe personal injury or death, please consult us before designin the capacitor in your application. Except for the written expressed warranties, CapXon does not impliedly, by assumption or whatever else, warrant, undertake, promise any other warranty or guaranty for any CapXon product. For further information, please visit our website www.capxongroup.com or contact CapXon directly.