Beijing Silk Road Enterprise Management Services Co., Ltd.
| Operating Temperature | -55℃~+105℃ |
| Lifetime | 7000hrs@105℃ |
| Capacitance | 330uF |
| Height - Seated (Max) | 16mm |
| Voltage Rating | 50V |
| Pin Spacing | 5mm |
| Diameter | 10mm |
| Equivalent Series Resistance(ESR) | 120mΩ@100kHz |
| Tolerance | ±20% |
| Ripple Current | 1.152A@100kHz |
| Description | 330uF 50V Aluminum Electrolytic Capacitors Through Hole,D10xL16mm 7000hrs@105℃ |
| Mfr. Part # | GH331M050G160A |
| Package | Through Hole,D10xL16mm |
| Model Number | GH331M050G160A |
View Detail Information
Explore similar products
High Temperature Aluminum Electrolytic Capacitor Chengx KM228M010G17RR0VH2FP0
V chip Aluminum Electrolytic Capacitors Chengx RVT1E221M0810 Rated 105C with
aluminum electrolytic capacitor HRK 400V10uF CD110 with rated voltage 400 volts
Low Impedance Surface Mount Capacitor JARSON RX1E221M0607 with 6.3 Volt Rated
Product Specification
| Operating Temperature | -55℃~+105℃ | Lifetime | 7000hrs@105℃ |
| Capacitance | 330uF | Height - Seated (Max) | 16mm |
| Voltage Rating | 50V | Pin Spacing | 5mm |
| Diameter | 10mm | Equivalent Series Resistance(ESR) | 120mΩ@100kHz |
| Tolerance | ±20% | Ripple Current | 1.152A@100kHz |
| Description | 330uF 50V Aluminum Electrolytic Capacitors Through Hole,D10xL16mm 7000hrs@105℃ | Mfr. Part # | GH331M050G160A |
| Package | Through Hole,D10xL16mm | Model Number | GH331M050G160A |
The CapXon GH Type Aluminum Electrolytic Capacitor is designed for reliable performance in various electronic applications. This series offers a wide operating temperature range of -55~105 and adheres to stringent quality standards, including JIS-C-5101-1. Key features include a robust construction with a safety vent for overpressure protection and a PET sleeve for marking and insulation. These capacitors are suitable for applications requiring stable electrical characteristics and long-term endurance.
| Part Number | Capacitance (F) | Capacitance Tolerance (%) | Rated Working Voltage (VDC) | Surge Voltage (VDC) | Max. Dissipation Factor (%) @ 100kHz/105 | Max. Ripple Current (mA) @ 100kHz/105 | Max. Leakage Current (A) | Max. Impedance () @ 100kHz/20 | Operating Temperature (C) | Case Size (D* L mm) | Endurance (Hrs) @ 105 | Lead Treatment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| GH331M050G160A | 330 | -20~20 | 50 | 58 | 10 | 1152 | 165 | 0.12 | -55~105 | 10X16 | 7000 | PET Sleeve |
| Item | Condition & Criterion |
|---|---|
| Range of working temperature | -55~105 () |
| Capacitance | Condition: Temperature: 202, Frequency: 120Hz, Voltage: 0.5Vrms Criterion: Tolerance: -20~20% |
| Dissipation factor (tan) | Condition: Temperature: 202, Frequency: 120Hz, Voltage: 0.5Vrms Criterion: See Table 1 |
| Leakage Current | Condition: Rated voltage applied across capacitors and 100010% protective resistor for 2 min. Criterion: I 165 (A) |
| Terminal strength (Tensile strength) | Condition: Static load applied to terminal in lead direction for 101S. (See datasheet for specific loads based on lead diameter) Criterion: Terminal should not be loose, breakage and bad connected. |
| Terminal strength (Bending strength) | Condition: Static load applied to lead wire, bent 90 (See datasheet for specific loads and cycles based on lead diameter) Criterion: Terminal should not be loose, breakage and bad connected. |
| Temperature characteristic | Condition: Testing when thermal equilibrium and Impedance must be on the same frequency. Criterion: 1. Impedance ratio shall not exceed values in Table 2. 2. Leakage current Shall not more than 800% of initial specified value. |
| High temperature load | Condition: Temperature: 105, Applied Voltage: Rated DC working voltage, Test time: 7000 H Criterion: 1. Capacitance Change Rate: C/C 25% of initial value 2. Dissipation Factor: DF 200% of specified value 3. Leakage Current: LC specified value 4. Appearance: No visible damage. |
| High Temperature Exposure (Storage) | Condition: Temperature: 105, Applied Voltage: None, Test time: 1000H Criterion: 1. Capacitance Change Rate: C/C 25% of initial value 2. Dissipation Factor: DF 200% of specified value. 3. Leakage Current: LC specified value. 4. Appearance: No visible damage. |
| Surge Test | Condition: Temperature: 15~35, Applied Voltage: 58V, Period: Charge 30s, discharge 330s per cycle, Cycles: 1000 Criterion: 1. Capacitance Change Rate: C/C 15% of initial value 2. Dissipation Factor: DF specified value 3. Leakage Current: LC specified value 4. Appearance: No visible damage. |
| Vibration | Condition: Frequency: 10~55Hz, Amplitude: 0.75mm, Acceleration: 98 m/s (10g), Time: X, Y, Z directions each 2 Hrs, total 6 Hrs. Criterion: 1. Capacitance Change Rate: C/C 5% of initial value 2. Dissipation Factor: DF specified value 3. Leakage Current: LC specified value 4. Appearance: No visible damage. |
| Solderability | Condition: Solder: Sn:96.5%, Ag:3%, Cu:0.5%, Temp: 2455, Immerse time: 2.00.5S, Speed: 252.5mm/s, Depth: 1.5~2.0mm between body and solder. Criterion: Above 95% area of surroundings surface shall be covered by the new soldering. |
| Resistance to soldering heat | Condition: Solder: Sn:96.5%, Ag:3%, Cu:0.5%, Temp: 260(0~3), Immerse time: 101S, Speed: 252.5mm/s, Depth: 1.5~2.0mm between body and solder. Criterion: 1. Capacitance Change Rate: C/C 5% of initial value 2. Dissipation Factor: DF specified value 3. Leakage Current: LC specified value. |
| Vent Test (For products with vent requirement) | Condition: Method: Reverse Voltage: 80V (for 22.4mm), 1A (for 22.4mm), 10A (for 22.4mm) Criterion: When the pressure relief vent operated, there shall be no explosion, flash, flame, spark or fire. |
| Temperature Cycling | Condition: Refer to JIC-5101-1 (2010) No:4.16. 10 cycles (Step 1: Lower category temp 3 for 303 min; Step 2: 255 for 3 min; Step 3: Upper category temp 2 for 303 min; Step 4: 255 for 3 min). Criterion: 1. Capacitance Change Rate: C/C 5% of initial value 2. Dissipation Factor: DF specified value 3. Leakage Current: LC specified value 4. Appearance: No visible damage. |
| High temp and humidity | Condition: Temperature: 402, Humidity: 90~95%RH, Maintained Time: 500H Criterion: 1. Capacitance Change Rate: C/C 10% of initial value 2. Dissipation Factor: DF 1.2 times of the original Spec. value 3. Leakage Current: LC specified value 4. Appearance: No visible damage. |
Example Marking:
Front: GH 105 P1502 VENT
Back: CapXon 330uF 50V
| Working Voltage (VDC) | 6 | 10 | 16 | 25 | 35 | 50 | 63 | 80 | 100 |
|---|---|---|---|---|---|---|---|---|---|
| D.F. (%)max. | 22 | 19 | 16 | 14 | 12 | 10 | 9 | 9 | 10 |
For capacitance>1000uF, add 2% per another 1000uF.
| Working Voltage | 6 | 10 | 16 | 25 | 35 | 50 | 63 | 80 | 100 |
|---|---|---|---|---|---|---|---|---|---|
| Z-25Z+20 | 4 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 1.5 |
| Z-40Z+20 | 6 | 4 | 3 | 3 | 2 | 2 | 2 | 2 | 2 |
| Z-55Z+20 | 8 | 6 | 5 | 5 | 4 | 4 | 4 | 4 | 4 |
For capacitance>1000uF, add 0.5 per another 1000uF for -25/+20; add 1 per another 1000uF for -40/+20; add 1.5 per another 1000uF for -55/+20.
| CAP(uF)Frequency(Hz) | 120 | 400 | 1K | 10K | 100K |
|---|---|---|---|---|---|
| CAP10 | 0.40 | 0.52 | 0.60 | 0.92 | 1.00 |
| 10CAP100 | 0.67 | 0.80 | 0.83 | 0.94 | 1.00 |
| 100CAP1000 | 0.75 | 0.84 | 0.88 | 0.95 | 1.00 |
| 1000CAP | 0.82 | 0.87 | 0.92 | 0.95 | 1.00 |
Disclaimer:
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
.gtr-container-9k2l8p { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; box-sizing: border-box; max-width: 100%; } .gtr-container-9k2l8p-header { margin-bottom: 20px;... .gtr-container-9k2l8p { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; box-sizing: border-box; max-width: 100%; } .gtr-container-9k2l8p-header { margin-bottom: 20px;...
Get in touch with us
Leave a Message, we will call you back quickly!