Beijing Silk Road Enterprise Management Services Co., Ltd.
| Operating Temperature | -55℃~+105℃ |
| Lifetime | 2000hrs@105℃ |
| Capacitance | 100uF |
| Height - Seated (Max) | 10.5mm |
| Voltage Rating | 50V |
| Diameter | 8mm |
| Equivalent Series Resistance(ESR) | - |
| Tolerance | ±20% |
| Ripple Current | - |
| Description | 100uF ±20% 50V Aluminum Electrolytic Capacitors 2000hrs@105℃ |
| Mfr. Part # | HV101M050F105ETR |
| Package | SMD,D8xL10.5mm |
| Model Number | HV101M050F105ETR |
View Detail Information
Explore similar products
High Temperature Aluminum Electrolytic Capacitor Chengx KM228M010G17RR0VH2FP0
V chip Aluminum Electrolytic Capacitors Chengx RVT1E221M0810 Rated 105C with
aluminum electrolytic capacitor HRK 400V10uF CD110 with rated voltage 400 volts
Low Impedance Surface Mount Capacitor JARSON RX1E221M0607 with 6.3 Volt Rated
Product Specification
| Operating Temperature | -55℃~+105℃ | Lifetime | 2000hrs@105℃ |
| Capacitance | 100uF | Height - Seated (Max) | 10.5mm |
| Voltage Rating | 50V | Diameter | 8mm |
| Equivalent Series Resistance(ESR) | - | Tolerance | ±20% |
| Ripple Current | - | Description | 100uF ±20% 50V Aluminum Electrolytic Capacitors 2000hrs@105℃ |
| Mfr. Part # | HV101M050F105ETR | Package | SMD,D8xL10.5mm |
| Model Number | HV101M050F105ETR |
The CapXon HV series Aluminum Electrolytic Capacitors are designed for general-purpose applications requiring reliable performance. These capacitors offer stable electrical characteristics across a wide operating temperature range and are built with robust construction, including a safety vent for overpressure protection. They are suitable for various electronic circuits where stable capacitance, low leakage current, and good ripple current handling are essential.
| Part Number | Capacitance (F) | Capacitance Tolerance (%) | Rated Working Voltage (VDC) | Surge Voltage (VDC) | Max. Dissipation Factor (%) @ 120Hz/105C | Max. Ripple Current (mA) @ 120Hz/105C | Max. Leakage Current (A) | Operating Temperature (C) | Case Size (D* L mm) | Endurance @ 105C (Hrs) |
|---|---|---|---|---|---|---|---|---|---|---|
| HV101M050F105ETR | 100 | -20~20 | 50 | 58 | 14 | 315 | 50 | -55~105 | 8X10.5 | 2000 |
Unit: mm
| D | L | A | B | C | W | P 0.2 |
|---|---|---|---|---|---|---|
| 8 | 10.5 | 8.3 | 8.3 | 9 | 0.7~1.1 | 3.1 |
| Component | Meaning |
|---|---|
| HV | Series |
| 101 | Capacitance = 100F |
| M | Capacitance Tolerance = -20~20% |
| 050 | Rated Voltage = 50V |
| F | Case Diameter = 8mm |
| 105 | Case Length = 10.5mm |
| E | L max |
| TR | Type / Lead Treatment |
| Condition | Temperature | Humidity | Air Pressure |
|---|---|---|---|
| Standard (No special regulation) | 1535 | 2575%RH | 86KPa106KPa |
| Judgment Doubt (No special regulation) | 2510 | 4060%RH | 86KPa106KPa |
| Dispute (Under standard room testing) | 201 | 6367%RH | 86KPa106KPa |
| NO. | Item | Conditions & Criterion |
|---|---|---|
| 1 | Range of working temperature | -55~105 (C) |
| 2 | Capacitance | Conditions: Temp: 202, Freq: 120Hz, Voltage: 0.5Vrms. Criterion: Tolerance: -20~20% |
| 3 | Dissipation factor (tan) | Conditions: Temp: 202, Freq: 120Hz, Voltage: 0.5Vrms. Criterion: See Table 1 |
| 4 | Leakage Current | Conditions: Rated voltage applied across capacitors and 100010% protective resistor for 2 min. Criterion: I 50 (A) |
| 5 | Terminal strength | Tensile strength: Load as per table (N) for 101S. Bending strength: Load as per table (N), bend body 90, return, bend 90 opposite, return. Approx. 2~3 sec/cycle. Specified cycles. Criterion: Terminal should not be loose, breakage, or bad connection. |
| 6 | Temperature characteristic | Conditions: Test when thermal equilibrium; Impedance at same frequency. Criterion: 1. Impedance ratio not exceed Table 2. 2. LC 800% of initial specified value. |
| 7 | High temperature load | Conditions: Temp: 105, Applied Voltage: Rated DC working voltage, Test time: 2000 H. Test after 16h standard atmospheric conditions. Criterion: 1. Capacitance Change Rate: C/C 25% initial. 2. Dissipation Factor: DF 200% specified. 3. Leakage Current: LC specified. 4. Appearance: No visible damage. |
| 8 | High Temperature Exposure (Storage) | Conditions: Temp: 105, Applied Voltage: None, Test time: 1000H. Test after 16h standard atmospheric conditions. Pre-treatment: DC working voltage for 30 min. Criterion: 1. Capacitance Change Rate: C/C 25% initial. 2. Dissipation Factor: DF 200% specified. 3. Leakage Current: LC specified. 4. Appearance: No visible damage. |
| 9 | Surge Test | Conditions: Temp: 15~35, Applied Voltage: 58V, Period: Charge 30s, discharge 330s. Cycles: 1000. Test after 16h standard atmospheric conditions. Criterion: 1. Capacitance Change Rate: C/C 15% initial. 2. Dissipation Factor: DF specified. 3. Leakage Current: LC specified. 4. Appearance: No visible damage. |
| 10 | Vibration | Conditions: Freq: 10~55Hz, Amplitude: 0.75mm, Accel: 98 m/s (10g). Time: X, Y, Z directions each 2Hrs, total 6Hrs. Test within 30 min after vibration. Criterion: 1. Capacitance Change Rate: C/C 5% initial. 2. Dissipation Factor: DF specified. 3. Leakage Current: LC specified. 4. Appearance: No visible damage. |
| 11 | Solderability | Conditions: Solder: Sn:96.5%, Ag:3%, Cu:0.5%. Temp: 2455, Immerse time: 2.00.5S, Speed: 252.5mm/s, Depth: 1.5~2.0mm between body and solder. Test after 2 hours from solder stove. Criterion: New solder coverage >95%. |
| 12 | Resistance to soldering heat | Conditions: See reflow profile table. Reflow can be accepted twice. Criterion: Return to normal temp and measure. |
| 13 | Vent (for products with vent requirement) | Conditions: Reverse Voltage: 80V. Criterion: No explosion, flash, flame, spark, or fire when vent operates. |
| 14 | Temperature Cycling | Conditions: 10 cycles as per JIS-C-5101-1 (2010) No:4.16. Criterion: 1. Capacitance Change Rate: C/C 5% initial. 2. Dissipation Factor: DF specified. 3. Leakage Current: LC specified. 4. Appearance: No visible damage. |
| 15 | High temp and humidity | Conditions: Temp: 402, Humidity: 90~95%RH, Maintained Time: 250H. Test after 16h standard atmospheric conditions. Criterion: 1. Capacitance Change Rate: C/C 20% initial. 2. Dissipation Factor: DF 1.2 times specified. 3. Leakage Current: LC specified. 4. Appearance: No visible damage. |
| Example | Meaning |
|---|---|
| 50V | Rated Voltage |
| 100 | Nominal Capacitance (uF) |
| Shadow part | Polarity (Cathode Indicate) |
| HV | Series Mark |
| 08 | Date Code (Year: 8, Month: represented by 1st digit of year, e.g. 0 for 2020, 1 for 2021) |
| Rated Voltage (VDC) | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 80 | 100 | 160~250 | 250 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 4~6.3 | 30 | 24 | 20 | 16 | 14 | 14 | 12 | 10 | 10 | - | - |
| 8~10 | 35 | 26 | 24 | 18 | 14 | 14 | 12 | 10 | 10 | 15 | 20 |
| 12.5 | 37 | 34 | 24 | 18 | 14 | 14 | 12 | 10 | 10 | 15 | 20 |
| Rated Voltage (VDC) | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 80 | 100 | 160~250 | 400 | 450 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Z-25Z+20 | 6 | 4 | 4 | 3 | 2 | 2 | 2 | 3 | 3 | 3 | 6 | 6 |
| Z-40Z+20 | 12 | 10 | 8 | 6 | 4 | 4 | 4 | 4 | 4 | 6 | 10 | 15 |
| CAP(F)Frequency(Hz) | 60(50) | 120 | 500 | 1K | 10K |
|---|---|---|---|---|---|
| 0.1CAP100F | 0.8 | 1.0 | 1.20 | 1.30 | 1.50 |
| 100CAP | 0.8 | 1.0 | 1.10 | 1.15 | 1.20 |
Disclaimer:
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
.gtr-container-9k2l8p { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; box-sizing: border-box; max-width: 100%; } .gtr-container-9k2l8p-header { margin-bottom: 20px;... .gtr-container-9k2l8p { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; box-sizing: border-box; max-width: 100%; } .gtr-container-9k2l8p-header { margin-bottom: 20px;...
Get in touch with us
Leave a Message, we will call you back quickly!