Beijing Silk Road Enterprise Management Services Co., Ltd.
| Voltage Rating | 50V |
| Capacitance | 22pF |
| Temperature Coefficient | NP0 |
| Tolerance | ±5% |
| Description | 22pF ±5% 50V Ceramic Capacitor NP0 1206 |
| Mfr. Part # | C1206N220J050T |
| Package | 1206 |
| Model Number | C1206N220J050T |
View Detail Information
Explore similar products
Ceramic capacitor AIDE CAPACITOR 1210X7R476K100NT designed for switch power
ceramic capacitor AIDE CAPACITOR 0603X7R105K100NT for energy saving lamps and
Multi Layer Ceramic Capacitors with CCTC TCC0603X5R105K500CT Specification and
Surface mount multilayer ceramic capacitors Chinocera HHV0805R7102K201NTHJ with
Product Specification
| Voltage Rating | 50V | Capacitance | 22pF |
| Temperature Coefficient | NP0 | Tolerance | ±5% |
| Description | 22pF ±5% 50V Ceramic Capacitor NP0 1206 | Mfr. Part # | C1206N220J050T |
| Package | 1206 | Model Number | C1206N220J050T |
This specification applies to Multilayer Ceramic Chip Capacitors (MLCC) designed for use in electric equipment with voltage ratings from 100V to 5KV. These MLCCs support Lead-Free wave and reflow soldering, maintaining their electrical characteristics and reliability. This product is compliant with RoHS.
| Part Number Code | Product Code | Chip Size | Temperature Characteristics | Capacitance Unit | Nominal Capacitance | Capacitance Tolerance | Rated Voltage | Tapping Code |
| C0805X472K501T | C (MLCC) | 0805 (2.001.25 mm) | X7R (15% @ -55~+125) | pF | 472 (4,700.0 pF) | K (10.0%) | 501 (500Vdc) | T (Tape & Reel) |
| No. | Item | Specification | Test Condition |
| 1 | Visual | No abnormal exterior appearance | Visual inspection |
| 2 | Dimension | See Page 3 | Visual inspection |
| 3 | Insulation Resistance | 10,000M or 500/C (Whichever is Smaller) | V500V, Rated Voltage; V500V, Applied 500Vdc; Charge Time60sec. |
| 4 | Capacitance | Within The Specified Tolerance | Class (NPO/SL); Class (X7R/X5R/X7E/Y5V/Z5U/Y5U) |
| 5 | Tan | Class (NPO/SL): More Than 30pF: Q1000; 30pF & Below: Q400 (+20C) Char. Maximum X7R: 2.5%; Class (Z5U/Y5U): 4.0% | C-Meter |
| 6 | Withstanding Voltage | No dielectric breakdown or mechanical breakdown | Char. Temp. Range Cap. Change(%) NPO: 30 ppm/; SL: +350~-1000ppm; X7R: 15%; Y5U: +22% ~-56%; Z5U: +22% ~-56% |
| 7 | Temperature Capacitance Coefficient | Class [C2-C1/C1(T2-T1)] 100%; Class (C2-C1)/C1 100% | T1: 25; T2: Test temperature; C1: Capacitance at 25; C2: Capacitance at T2 |
| 8 | Adhesive Strength of Termination | No indication of peeling shall occur on the terminal electrode. A 5Nf (0.5Kgf) pull force shall be applied for 101 second. Appearance: No mechanical damage. | |
| 9 | Resistance to Flexure of Substrate | Capacitance Change: NPO/SL: 5.0%; X7R: 12.5%; Y5U/Z5U: 30.0% | Bending shall be applied to the 1.0 mm with 1.0 mm/sec. |
| 10 | Solderability | More than 90% of the terminal surface is to be soldered newly, so metal part does not come out or dissolve. Appearance: No mechanical damage. | Solder Temp: 2455; Dip Time: 50.5 sec; Immersing Speed: 2510% mm/s; Solder: H63A; Flux: Rosin; Preheat: 80~120 for 10~30sec. |
| 11 | Resistance To Soldering Heat | Capacitance Change: Class (NPO/SL): Within 2.5% or 0.25pF (whichever is larger); X7R: Within 10%; Class (Z5U/Y5U): Within 20% | Preheat: 15010 for 60~120sec; Dip: Solder Temp. 2605; Dip Time: 101sec; Immersing Speed: 2510% mm/s; Solder: H63A; Flux: Rosin. Measure after cooling. |
| 12 | Temperature Cycle | Capacitance Change: Class (NPO/SL): Within 5.0% or 0.5pF (whichever is larger); X7R: Within 15%; Class (Z5U/Y5U): Within 30% | Capacitor shall be subjected to five cycles of the temperature cycle as following: Step 1: Min Rated Temp. (+0/-3) 30 min; Step 2: 25 3 min; Step 3: Max Rated Temp. (+3/-0) 30 min; Step 4: 25 3 min. Solder the capacitor on P.C. board before testing. |
| 13 | Humidity | Capacitance Change: Class (NPO/SL): Within 3.0% or 0.3pF (whichever is larger); X7R: Within 15%; Class (Z5U/Y5U): Within 30% | Temperature: 402; Relative Humidity: 90~95%RH; Test Time: 500+12/-0Hr. Solder the capacitor on P.C. board before testing. |
| 14 | High Temperature Load (Life Test) | Capacitance Change: Class (NPO/SL): Within 2.5% or 0.25pF (whichever is larger); X7R: Within 7.5%; Class (Z5U/Y5U): Within 20% | Temperature: Max operation temperature; Test Time: 1000+12/-0Hr; Applied DC voltage (following table). Current Applied: 50 mA Max. |
| 15 | Vibration | Insulation Resistance: To satisfy the specified initial value. | Vibrate with amplitude of 1.5mm P-P changing frequencies from 10Hz to 55Hz and back to 10Hz in about 1 min. Repeat for 2 hours each in 3 perpendicular directions. Solder the capacitor on P.C. Board before testing. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!