Beijing Silk Road Enterprise Management Services Co., Ltd.
| Voltage Rating | 1kV |
| Capacitance | 2.2nF |
| Body Thickness | 2.5mm |
| Temperature Coefficient | Y5P |
| Tolerance | ±10% |
| Pin Spacing | 5mm |
| Description | 2.2nF ±10% 1kV Ceramic Capacitor Through Hole P=5mm |
| Mfr. Part # | H222K070BN48230L502 |
| Package | Through Hole,P=5mm |
| Model Number | H222K070BN48230L502 |
View Detail Information
Explore similar products
Ceramic capacitor AIDE CAPACITOR 1210X7R476K100NT designed for switch power
ceramic capacitor AIDE CAPACITOR 0603X7R105K100NT for energy saving lamps and
Multi Layer Ceramic Capacitors with CCTC TCC0603X5R105K500CT Specification and
Surface mount multilayer ceramic capacitors Chinocera HHV0805R7102K201NTHJ with
Product Specification
| Voltage Rating | 1kV | Capacitance | 2.2nF |
| Body Thickness | 2.5mm | Temperature Coefficient | Y5P |
| Tolerance | ±10% | Pin Spacing | 5mm |
| Description | 2.2nF ±10% 1kV Ceramic Capacitor Through Hole P=5mm | Mfr. Part # | H222K070BN48230L502 |
| Package | Through Hole,P=5mm | Model Number | H222K070BN48230L502 |
The Dafu Manufacturing Ceramic Disc Capacitor is designed for use in power supply and output circuits of various electronic devices. These capacitors are suitable for applications including air conditioners, color televisions, monitors, copiers, switching power supplies, energy-saving lamps, telephones, audio equipment, and tape recorders. They offer reliable performance with specific temperature characteristics and electrical properties.
| Customer Part No. | Product Code | Dimensions (mm) D 1.0 | Dimensions (mm) T 1.0 | Dimensions (mm) L 1.0 | Dimensions (mm) F 0.5 | Dimensions (mm) d 0.05 | Dimensions (mm) e Max | CAP (PF) | DF (%) | IR (M) | T.V (V) | Lead Style |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| H101K050BN48230L | 502 | 5.5 | 2.5 | 23 | 5.0 | 0.48 | 3.5 | 100 | 2.5 | 10000 | 1000 | L |
| H102K050BN48230L | 502 | 5.5 | 2.5 | 23 | 5.0 | 0.48 | 3.5 | 1000 | 2.5 | 10000 | 1000 | L |
| H471K050BN48230L | 502 | 5.0 | 2.5 | 23 | 5.0 | 0.48 | 3.5 | 470 | 2.5 | 10000 | 1000 | L |
| H222K070BN48230L | 502 | 7.5 | 2.5 | 23 | 5.0 | 0.48 | 3.5 | 2200 | 2.5 | 10000 | 1000 | L |
| No. | Item Name | Test Method | Technical Requirements |
|---|---|---|---|
| 5.1.1 | Capacitance and Tolerance | Tested at 25, 1 MHz and 1 Vrms (Class ), 1 kHz and 1 Vrms (Class ), 1 kHz and 0.1 Vrms (Class ) | Refer to Specification Table |
| 5.1.2 | Quality Factor or Dissipation Factor | Test conditions as above. | 2.5% max. (Y5P, YR, Y5U & Z5U) 0.3% max. (YR) 3.5% max. (Y5V & Z5V) 5% max. (Class ceramic Y5V & Y5U) 3.5% max. (Class ceramic Y5P) |
| 5.1.3 | Insulation Resistance | Tested within 605 seconds of charging at rated voltage or 500VDC (above rated voltage) | Class , Class : 10000 M min. Class : 250 M min. |
| 5.1.4 | Withstand Voltage | Voltage: 300% of rated voltage (50V ~ 500V), 150% of rated voltage (1000V~ 2000V) applied between capacitor leads. Insulation voltage: Capacitor leads connected, 150% of rated voltage applied. | No breakdown or arcing. |
| 5.1.5 | Temperature Characteristic | Capacitor placed at specified temperatures, allowed to reach thermal equilibrium, and capacitance measured. Calculated using formulas for temperature coefficient (T.E.) and capacitance change (C). | Class Capacitance Change: Less than 1% or 0.05pF (whichever is greater) Class & Capacitance Change: Y5P: 10% YR: +15% to -30% Y5U: +20% to -55% Z5U: +20% to -55% Y5V: +20% to -80% Z5V: +20% to -80% |
| No. | Item Name | Test Method | Technical Requirements |
|---|---|---|---|
| 5.2.1 | Lead Tensile Strength | Capacitor body fixed, lead wire axis vertical downwards, axial tensile force of 10N applied for 101 seconds. | Capacitor not damaged, leads not broken or loose. |
| 5.2.2 | Bending Test | Capacitor body fixed, lead wire axis vertical downwards, 5N weight suspended from the end of the lead. Ceramic body tilted to 90 with the vertical in 2~3 seconds, then returned to original position in the same time. Process repeated twice for leads in opposite directions. | Leads not damaged. |
| No. | Item Name | Test Method | Technical Requirements |
|---|---|---|---|
| 5.3.1 | Solderability | Solder temperature: 2355, Immersion time: 2.50.5 seconds, Immersion speed: 256mm/s | 95% or more of the immersed part of the lead wire uniformly covered. |
| 5.3.2 | Vibration Test | Frequency range: 10~55Hz, Amplitude (total displacement): 1.5mm, Duration: 6 hours, Frequency sweep rate: 10~55~10Hz in approx. 1 minute. Vibration for 2 hours in each of three mutually perpendicular directions. | Appearance: No visible damage Capacitance Change: Within specified tolerance Quality Factor or Dissipation Factor: See 5.1.2 |
| 5.3.3 | Resistance to Soldering Heat | Solder temperature: 2605, Immersion time: 100.5 Sec. Height of tin surface from product base plane: 1.27mm. Post-treatment: Placed under standard atmospheric pressure for 242 hours. | Appearance: No visible damage Capacitance Change: 2.5% or 0.25pF (whichever is greater, Class ); 5% (Y5P & YR); 15% (Y5U & Z5U); 20% (Y5V & Z5V) Withstand Voltage (between leads): See 5.1.4 |
| 5.3.4 | Resistance to Solvents | Immersed in Isopropyl alcohol for 305 seconds. | Appearance: No visible damage |
| 5.3.5 | Temperature Cycling | Product placed in a test chamber: -252 for 30 min, room temperature for 3 min, then 852 for 30 min, room temperature for 3 min. One cycle. 5 cycles required. Post-treatment: (Same as 5.3.3) | Appearance: No visible damage Capacitance Change: 5% or 0.5pF (whichever is greater, Class ); 10% (Y5P & YR); 20% (Y5U & Z5U); 30% (Y5V & Z5V) Quality Factor or Dissipation Factor: 5% max. (Y5V & Z5V); 3% max. (Y5P, YR, Y5U & Z5U); 7.5% max (Class ceramic) Insulation Resistance: 1000M min.; 170M min. (Class ceramic) Withstand Voltage (between leads): See 5.1.4 |
| 5.3.6 | Damp Heat Test | Product stored at 402, 90~95% relative humidity for 500 +24 hours. Post-treatment: Placed under standard atmospheric pressure for 1~2 hours. | Appearance: No visible damage Capacitance Change: See 5.3.5 Q or DF: See 5.3.5 Insulation Resistance: 2500M min. (Class ceramic); 1000M min (Class ceramic); 170M min (Class ceramic) Withstand Voltage (between leads): See 5.1.4 |
| 5.3.7 | Endurance Test | Product placed at 853, with 200% rated voltage (50V ~ 500V), 125% rated voltage (1000V~ 3000V), 100% rated voltage (Class ceramic) applied continuously for 1000+48 hours. Post-treatment: (Same as 5.3.3) | Appearance: See 5.3.5 Capacitance Change: See 5.3.5 Quality Factor or Dissipation Factor: See 5.3.5 Insulation Resistance: See 5.3.6 Withstand Voltage (between leads): See 5.1.4 |
Ceramic capacitors comply with the EU RoHS Directive:
| Testing Item | Limited Level |
|---|---|
| Cadmium (Cd)/Cadmium Compounds | 100PPM |
| Lead (Pb)/Lead Compounds | 1000PPM |
| Mercury (Hg)/Mercury Compounds | 1000PPM |
| Hexavalent-Chromium (Cr6+) Compounds | 1000PPM |
| PBB/PBDE (Polybrominated Biphenyls/Brominated Diphenyl Ethers) | 1000PPM |
| No. | Name | Specification | Supplier | Remarks |
|---|---|---|---|---|
| 1 | Lead wire | 0.55/0.6/0.7 0.05 | Shenzhen Yangqi Industrial Co., Ltd. (), Ma'anshan Xingguan Electronic Materials Co., Ltd. (), Hengtai Electronics () | |
| 2 | Ceramic Dielectric | Characteristic SLY5P, Y5U, Y5V | Guangdong Dafu Electronics Co., Ltd. (), Kunshan Wanfeng Electronics Co., Ltd. (), Hangzhou Xin'anjiang Tonghao Electronics Co., Ltd. () | |
| 3 | Encapsulating Material | Epoxy Resin () XCP-231, Epoxy Resin () TK1000 | Xi'an Baker Electronic Materials Technology Co., Ltd. (), Weihua Electronics () | |
| 4 | Tin | Alloy tin bar Sn98Ag2.0 | Nanjing Damai Technology Industrial Co., Ltd. () |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!