Beijing Silk Road Enterprise Management Services Co., Ltd.
| Capacitance | 100nF |
| Operating Temperature | -40℃~+110℃ |
| Voltage(AC) | 450V |
| Tolerance | ±10% |
| Description | 100nF -40℃~+110℃ 450V ±10% Through Hole,P=15mm Ceramic Capacitors RoHS |
| Mfr. Part # | PX104K2W1503 |
| Package | Through Hole,P=15mm |
| Model Number | PX104K2W1503 |
View Detail Information
Explore similar products
Ceramic capacitor AIDE CAPACITOR 1210X7R476K100NT designed for switch power
ceramic capacitor AIDE CAPACITOR 0603X7R105K100NT for energy saving lamps and
Multi Layer Ceramic Capacitors with CCTC TCC0603X5R105K500CT Specification and
Surface mount multilayer ceramic capacitors Chinocera HHV0805R7102K201NTHJ with
Product Specification
| Capacitance | 100nF | Operating Temperature | -40℃~+110℃ |
| Voltage(AC) | 450V | Tolerance | ±10% |
| Description | 100nF -40℃~+110℃ 450V ±10% Through Hole,P=15mm Ceramic Capacitors RoHS | Mfr. Part # | PX104K2W1503 |
| Package | Through Hole,P=15mm | Model Number | PX104K2W1503 |
This specification covers the requirements for KEYA Metallized Polypropylene Film AC Capacitors, specifically designed as Interference Suppressors Class-X2. These capacitors are intended for use in applications requiring suppression of electromagnetic interference from power supplies.
| KYET P/N | Customer P/N | Capacitance (uF) | Tolerance (%) | Rated Voltage (VAC) | Dimensions (mm) WxHxT | Lead Pitch (P) | Lead Diameter (d) | Color | Symbol |
| PX104K2W1503 | 104K380VAC P15 18*13.5*6 | 0.1 | 10 | 380 | 18x13.5x6 | 15 | 0.8 | Grey | X2 |
| Item | Description | Test Conditions |
| Scope | This specification covers the requirements of KEYA Metallized Polypropylene Film AC Capacitor (Interference Suppressors Class-X2). | |
| Standard Atmospheric Conditions | Ambient Temperature: 15 to 35 (+20 5 for doubt) Relative Humidity: 45% to 75% (60% to 70% for doubt) Air Pressure: 86 kPa to 106 kPa | |
| Operating Temperature Range | -40 to +110 | Continuous operation at rated voltage. |
| Construction | Dielectric: Metallized Polypropylene Film Metal Spray: Special Solder Lead Wire: Tinned Copper-clad Steel Wire Epoxy Resin: UL 94V-0 Flame Retardant Plastic Case: UL 94V-0 Flame Retardant | |
| Marking | Manufacturer's Symbol, Type, Class (X2), Capacitance (EIA 3-digit code), Tolerance (J, K, M), Rated Voltage, Climatic Category (40/110/21/B), Approval Marks (cULus/ENEC/CQC), Manufacture Code. | |
| Withstand Voltage (Between Terminals) | 4.3*Ur (DC) for 60 sec. | No abnormality. |
| Withstand Voltage (Between Terminals & Enclosure) | 2*Ur+1,500VAC for 2 to 5 sec. (Min. 2,000VAC) | No abnormality. |
| Dissipation Factor (DF) | 0.001 (0.1%) at 1 KHz | Measuring Frequency: 2%; Measuring Voltage: 1 Vrms. |
| Capacitance | Within the tolerance specified. | Measuring Frequency: 2%; Measuring Voltage: 1 Vrms. at +20 5. |
| Insulation Resistance (I.R.) | 15,000 Mohm (C0.33uf) 5,000 Mohm*uF/C (C>0.33uf) | Applied Voltage: 100 VDC; Charge Time: 605 sec. |
| Soldering Property | More than 90% of circumferential surface of lead wire shall be covered with new solder. | Soldering temperature: +235 5; Immersion duration: 2 0.5 sec. |
| Terminal Strength (Tensile) | No abnormality. | Apply 1.0Kg for 10 1 sec. to the terminal in the axial direction and acting in a direction away from the body. |
| Temperature Cycle | Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. @ 1KHz. Insulation Resistance: 50% of the limit value in NO.5.4. | Total 5 cycles: (+20 for 3 min, -40 for 30 min, +20 for 3 min, +110 for 30 min, +20 for 3 min). After test, allow 1.5 0.5 Hrs. at ordinary condition. |
| Dry Heat Resistance | Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. @ 1KHz. Insulation Resistance: 50% of the limit value in NO.5.4. | Test Temperature: +110 2; Test Duration: 16 + 1/-0 hrs. |
| Cold Resistance | Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. @ 1KHz. Insulation Resistance: 50% of the limit value in NO.5.4. | Test Temperature: -40 3; Test Duration: 2 1 hrs. |
| Damp Heat | Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. @ 1KHz. Insulation Resistance: 50% of the limit value in NO.5.4. | Test Temperature: +40 2; Test Humidity: 90% to 95% R.H.; Test Duration: 21 days. After test, allow 1.5 0.5 Hrs. at ordinary condition. |
| Vibration Resistance | Appearance: No mechanical damage. Connection strength: No short-circuiting or open. Stable connection. | Frequency Change: 10-55-10 Hz; Vibration Distance: 1.5 mm; Test Direction: X,Y,Z; Test Duration: 2+1/-0 hrs each direction. |
| Soldering Heat Resistance | Appearance: No remarkable change. Marking legible. Connection of Element: Stable. Withstand Voltage Between Terminals: Shall satisfy NO.5.1. Capacitance Change Rate: Within 3%. Dissipation Factor: 0.002 (0.2%) max. @ 1KHz. Insulation Resistance: 50% of the limit value in NO.5.4. | Preheat Temp.: 100~120 (60 sec. max); Temp. Increase: 3/sec. max; Soldering Temp.: +260 5; Immersion Duration: 5 1sec; Immersion Depth: 4 0.8mm. After test, allow 1.5 0.5 Hrs. at ordinary condition. |
| Endurance Life | Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 10%. Dissipation Factor: Cr 1uF : 0.008 (0.8%) max. Cr >1uF : 0.005 (0.5%) max. @ 1KHz. Insulation Resistance: 50% of the limit value in NO.5.4. | Test Temperature: +110 2; Test Voltage: 1.25*rated voltage. Test Duration: 1,000 Hrs. (Voltage increased to 1000 Vrms for 0.1 sec. every hour through a 475% resistor). |
| High Temperature High Humidity | Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. @ 1KHz. Insulation Resistance: 50% of the limit value in NO.5.4. | Test Temperature: +85 2; Test Humidity: 85% 2% R.H.; Test Voltage: 240VAC; Test Duration: 1000 Hrs. After test, allow 1.5 0.5 Hrs. at ordinary condition. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!