Beijing Silk Road Enterprise Management Services Co., Ltd.
| Capacitance | 100nF |
| Operating Temperature | -40℃~+110℃ |
| Ratings | X2 |
| Voltage(AC) | 310V |
| Tolerance | ±10% |
| safety certification | UL;KC;VDE;ENEC;CQC;CB |
| Description | 100nF ±10% 310V Safety Capacitor X2 Through Hole,P=15mm |
| Mfr. Part # | W42Q3104KM8L00A0W1 |
| Package | Through Hole,P=15mm |
| Model Number | W42Q3104KM8L00A0W1 |
View Detail Information
Explore similar products
Ceramic capacitor AIDE CAPACITOR 1210X7R476K100NT designed for switch power
ceramic capacitor AIDE CAPACITOR 0603X7R105K100NT for energy saving lamps and
Multi Layer Ceramic Capacitors with CCTC TCC0603X5R105K500CT Specification and
Surface mount multilayer ceramic capacitors Chinocera HHV0805R7102K201NTHJ with
Product Specification
| Capacitance | 100nF | Operating Temperature | -40℃~+110℃ |
| Ratings | X2 | Voltage(AC) | 310V |
| Tolerance | ±10% | safety certification | UL;KC;VDE;ENEC;CQC;CB |
| Description | 100nF ±10% 310V Safety Capacitor X2 Through Hole,P=15mm | Mfr. Part # | W42Q3104KM8L00A0W1 |
| Package | Through Hole,P=15mm | Model Number | W42Q3104KM8L00A0W1 |
This document specifies the W42 series of X2 class suppression capacitors designed to suppress electromagnetic interference from power supplies. These metallized polypropylene film capacitors feature a flame-retardant epoxy resin encapsulation and a flame-retardant plastic casing, meeting UL94V-0 standards. They are suitable for applications requiring reliable EMI suppression.
| Product Part No. | Model | Capacitance (uF) | Rated Voltage (VAC) | Capacitance Tolerance | Pitch (mm) | Lead Diameter (mm) | Operating Temperature Range (C) | Dissipation Factor (tan ) | Insulation Resistance (M) |
|---|---|---|---|---|---|---|---|---|---|
| W42Q3104KM8L00A0W1 | MKP-310VAC-104K-P15 | 0.1 | 310 | 10% (K) | 15.0 | 0.8 | -40 to +110 | 0.15% (1kHz, 20C) for 0.001F CR 1.0F; 0.3% (1kHz, 20C) for 1.0F < CR 10F | 15000 (CR0.33F); 5000S (CR0.33F) (20C, 100V, 1min) |
| Test Type | Standard | Conditions | Acceptance Criteria |
|---|---|---|---|
| Solderability | IEC 68-2-20 | Soldering bath temp: 2355C, Immersion time: 2.0s0.5s | Good tinning on lead surface |
| Resistance to Soldering Heat | IEC 68-2-20 | Soldering bath temp: 2605C, Immersion time: 10s1s, Immersion depth: 2+0/-0.5mm from mounting surface | Capacitance change: 5% |
| Rapid Change of Temperature | IEC 68-2-14 | A = -40C; B = +110C, Duration: 30min, Cycles: 5 | Capacitance change: 5% |
| Vibration | IEC 68-2-6 | Frequency: 10-500Hz, Duration: 6 hours (2 hours per direction), Amplitude: 0.75mm or 98m/s | No visible damage or loosening |
| Impact | IEC 68-2-29 | Impacts: 4000, Acceleration: 390m/s, Pulse duration: 6ms | No visible damage or loosening |
| Dry Heat | IEC 68-2-2 | Temperature: +110C, Duration: 16 hours | No permanent breakdown or arcing; Appearance: no visible damage, clear marking; Capacitance change: 5%; Dissipation factor change: 0.8% (CR1.0F), 0.5% (CR1.0F); Insulation resistance: 50% of initial |
| Cold | IEC 68-2-1 | Temperature: -40C, Duration: 2 hours | (See Cyclic Damp Heat) |
| Low Air Pressure | IEC 68-2-13 | Temperature: 15-35C, Pressure: 8.5KPa, Duration: 1 hour (rated voltage applied in last minute) | (See Cyclic Damp Heat) |
| Cyclic Damp Heat | IEC 68-2-30 (Test Db, severity b) | (See Steady State Damp Heat for acceptance criteria after other cycles) | (See Steady State Damp Heat for acceptance criteria after other cycles) |
| Steady State Damp Heat | IEC 68-2-3 | Temperature: 402C, Humidity: 93+2/-3%, Duration: 56 days | Appearance: no visible damage, clear marking; Capacitance change: 5%; Dissipation factor change: 0.8% (CR1.0F at 1kHz), 0.5% (CR1.0F at 1kHz); Insulation resistance: 50% of initial |
| Pulse Voltage | - | CR1.0F: UP = 2.5KV DC; CR1.0F: UP = RC/5.2 KV DC; 24 pulses per capacitor, pulse interval 10s | No permanent breakdown or arcing; Self-healing capability assessed by waveform |
| Endurance | - | Temperature: +110C, Voltage: 1.25UR (50Hz), Duration: 1000 hours; Intermittent overvoltage: 1000V (RMS) for 0.1s every hour, applied via 475% resistor | Appearance: no visible damage, clear marking; Capacitance change: 10%; Dissipation factor change: 0.8% (CR1.0F at 1kHz), 0.5% (CR1.0F at 1kHz); Insulation resistance: 50% of initial |
| Charge/Discharge | - | Charge cycles: 10000; Charge voltage: 2UR DC; Charge time: 0.5s; Discharge time: 0.5s; Charge resistance: 220/CR or limit to 1A; Discharge resistance: Calculated based on dU/dt | Capacitance change: 10%; Dissipation factor change: 0.8% (CR1F at 10kHz), 0.5% (CR1F at 1kHz); Insulation resistance: 50% of initial |
| Flammability Test | - | Flame application time based on volume (20s, 30s, 60s) | Burning time 10s; No burning droplets or glowing parts igniting tissue paper |
| Auto-ignition Test | - | Ui=2.5kV; 20 discharges from a storage capacitor, 5s interval; Voltage U applied continuously | Impregnating gauze should not burn; no permanent breakdown or arcing |
| Mark | Specification | Certificate No. |
|---|---|---|
| IEC | IEC 60384-14:2013, GB/T6346 | CQC14001119697 |
| UL/CUL | IEC 60384-14:2013, UL 60384-14:2009, CSA E60384-14:09 | E334332 |
| KC | KC 60384-14(2015-09), KC 60384-1(2015-09) | SU03089-16001A, SU03089-16002A, SU03089-16003A |
| ENEC | IEC 60384-14(ed.4) | DE1-62887 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!