Chengli Special Automobile Co.,Ltd
| Packaging Details | Nuked |
| Delivery Time | 15 working days |
| Payment Terms | T/T,LC, |
| Supply Ability | 150 sets/month |
| Model NO. | CLW5250XWEQ5 |
| Emission Standard | Euro VI |
| Payload | 30T |
| Transmission Type | Manual |
| Fuel | Diesel |
| Tank Volume | 18000L |
| Drive Wheel | 6x4 |
| Hoesrpower | 350HP |
| Condition | New |
| Tire Specifications | 11.00r20 |
| Steering Wheel Type | Hydraulic Power Assistance |
| Steel Plate Material | Q345manganese Steel |
| Transport Package | Complete Vehicle Transportation |
| Specification | 9300*2550*3650 |
| Trademark | CLW |
| Origin | Hubei, China |
| HS Code | 8701909000 |
| Production Capacity | 1000-10000 |
| Certification | ISO9001 |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Isuzu 4X2 6000L Vacuum Sewage Suction Truck, Used for Cleaning Septic Tanks,
Sitrak 18 Cubic Meter Vacuum Sewage Suction Truck - CE Certified Municipal
Shacman F3000 H3000 X3000 Vacuum Sewage Suction Truck Factory Sewage Suction
Low-Priced Sale of HOWO 18cbm Sewage Suction Truck 6X4 Vacuum Sewage Suction
Product Specification
| Packaging Details | Nuked | Delivery Time | 15 working days |
| Payment Terms | T/T,LC, | Supply Ability | 150 sets/month |
| Model NO. | CLW5250XWEQ5 | Emission Standard | Euro VI |
| Payload | 30T | Transmission Type | Manual |
| Fuel | Diesel | Tank Volume | 18000L |
| Drive Wheel | 6x4 | Hoesrpower | 350HP |
| Condition | New | Tire Specifications | 11.00r20 |
| Steering Wheel Type | Hydraulic Power Assistance | Steel Plate Material | Q345manganese Steel |
| Transport Package | Complete Vehicle Transportation | Specification | 9300*2550*3650 |
| Trademark | CLW | Origin | Hubei, China |
| HS Code | 8701909000 | Production Capacity | 1000-10000 |
| Certification | ISO9001 | Place of Origin | CHINA |
| Accessories name | model | brand |
| panel | Q345-A carbon steel standard board | Wuhan Iron & Steel Co., Ltd |
| vacuum pump | Weilong | Hangzhou Weilong Pump Industry Co., LTD |
| power takeoff | power takeoff | Hubei Dacheng Gear Co., LTD |
| hydro-cylinder | 800/1200mm | Hengli Auto Parts Co., Ltd |
| multiple unit valve | The DL-8 series | Yangzhou Jiangyan Hydraulic Parts Co., LTD |
| Note: Install two 8-meter suction pipes, two sets of Yin and Yang ends, filter screen, dung guide pipe at the inlet, 10-15 cm at the bottom of the tank, and 4 locking devices on the back cover. | ||
| order number | Content (corresponding to the real car picture) |
| 1 | The effective volume of the sewage tank is about 20square meters, and the shape design of the tank and the water tank is coordinated and beautiful. The whole vehicle color is optional. |
| 2 | The tank is cylindrical, butterfly head, formed with special mold, the back cover is hydraulically opened with manual locking. The sealing ring of the back cover is resistant to sewage corrosion. After the sealing ring is embedded in the sealing groove, it is close with the sealing groove without clearance. |
| 3 | The head adopts 6mm high quality carbon steel plate, the cylinder adopts 6mm thick high quality carbon steel plate, the material is Q235B, and the negative thickness deviation meets the corresponding national standard. In order to prevent the negative pressure deformation of the tank and the seal head, the tank and the inner head are strengthened. |
| 4 | The wave plate in the tank is fortified, the steel plate thickness is 4mm, the wave plate is firmly connected with the tank, and there is no obvious slag clamp and pores at the connection. The upper part of the wave plate is vent, and the lower flow port can pass. |
| 5 | The tank flange has the same diameter of the outer circle as the rear head flange. Control the flange deformation after welding with the cylinder to ensure the sealing ring. The sewage connection tank is allowed to weld in the lower half of the cylinder flange. |
| 6 | The suction pipe and drainage pipe are all made of seamless steel pipe, and the wall thickness is not less than 4mm. The suction pipe and drainage pipe are stuck. The sewage pipe are aluminum alloy ball valve, and the valve is marked by the rear opening. And the rear drainage pipe is 5 to 10 degrees below the horizontal face; the rear drainage port and the rear protection shall not interfere. |
| 7 | The suction tank can pressure dump, also can lift dump. When unloading, the tank rises and drops smoothly, without any movement, collision and lag phenomenon. |
| 8 | An overflow prevention device shall be installed at the upper pumping outlet of the tank. |
| 9 | Cylindrical transparent window fits the front head of the tank for operator observation. Install the liquid level alarm device to the tank body. |
| 10 | U-shaped bolts are used to connect the subframe and the main car girder, and the thread should expose the nut 3~5 buckle after installation. |
Chengli Special Purpose Vehicle Co., Ltd., located in the southern suburbs of Zengdu District, Suizhou City, Hubei Province, was established in September 2004 with registered capital of 100 million yuan. The company currently has total assets of 1.645 billion yuan, occupies 610 mu (approximately 16 acres), and employs 1,786 people. Its main business scope includes the research and development, manufacturing, sales, and service of complete vehicles, special-purpose vehicles, new energy vehicles, and emergency support vehicles.
The company has obtained ISO9001 quality management, ISO 14001 environmental management, and ISO45001 occupational health and safety management system certifications. It also holds various management certifications, including five-star after-sales service, 3C compulsory certification, automotive energy conservation and environmental protection certification, automotive tax exemption certification, American Society of Mechanical Engineers (ASME) certification, and EU Agreement ADR. The company holds production qualifications for special-purpose vehicles, complete vehicles, new energy vehicles, truck-mounted cranes, mobile cranes, and fire trucks.
The company's "Chengliwei" branded products are popular both domestically and internationally, with exports to over 50 countries and regions, including Nigeria, Ghana, Angola, Bolivia, Chile, Cambodia, and Myanmar.
Company Details
Business Type:
Manufacturer
Year Established:
2004
Total Annual:
90000-1000000
Employee Number:
9000~10000
Ecer Certification：
Verified Supplier
.gtr-container-xyz789 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; box-sizing: border-box; } .gtr-container-xyz789 p { font-size: 14px; margin-bottom: 1em; text-align: left !important; } .gtr... .gtr-container-xyz789 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; box-sizing: border-box; } .gtr-container-xyz789 p { font-size: 14px; margin-bottom: 1em; text-align: left !important; } .gtr...
Get in touch with us
Leave a Message, we will call you back quickly!