Shaanxi Automobile 4X2 3000 L 5000 L Carry Cargos Oil Tanker Truck 2warehouses

  Fuel Truck Safety Operating Procedures
1, General Provisions
As an essential transportation device, its operation safety is closely related to human life, property safety, and environmental safety. In order to standardize the operation process of fuel trucks and improve operational safety, this safety operating procedure is specially formulated. The driving dance and operators of the refueling vehicle must strictly follow the rules to ensure safety during the operation process
Vehicle inspection and preparation
1. Vehicle inspection: Before each trip, the driver's fee should conduct a comprehensive inspection of the refueling vehicle, including the body, tires, fuel tank, and fire equipment, to ensure that the vehicle is in good condition with dry license plates, full of air, and electricity.
2. Complete documents: Confirm that the vehicle driving license, the entire driving license, the name of the insured goods, the securities, customs, and health certificates are all valid. Drivers and escorts must undergo professional training and hold certificates before taking up their posts.
3. Safety protection: Wear anti-static work clothes, shoes, and hand screen tickets. Carry items that are prone to static electricity or sparks, such as flammable materials and mobile phones, on board.
Refueling operation process
1. Parking positioning: Choose a flat, open, and away from fire, heat sources, and electrical equipment to park, and maintain a safe distance from surrounding vehicles.
2. Static elimination: Before refueling, a static grounding device should be used to connect the vehicle to the ground to ensure the safe dissipation of static electricity.
3. Connecting pipelines: Connect the refueling pipeline correctly to ensure that the interface is tight and leak free. Check whether the pipeline is intact, whether there is any damage or aging phenomenon.
4. Slowly refuel: Start the oil pump and slowly refuel the oil receiving equipment, paying attention to changes in oil level and pressure to prevent oil overflow or excessive pressure.
5. Monitoring abnormalities: During the refueling process, the driver and operator should closely monitor the working status of the vehicle and refueling equipment. Once an abnormal situation is detected (such as
Oil leakage, abnormal noise, sudden pressure changes, etc. should be immediately stopped from refueling and the cause identified.
6. Turn off the device: After refueling, first turn off the fuel pump, then disconnect the refueling pipeline, and finally turn off the vehicle's power and engine.
4, Emergency response
1. Leakage treatment: In case of oil leakage, the operation should be stopped immediately, the power should be cut off, and special tools should be used to collect the leaked material to prevent contamination
Disperse. At the same time, set up a warning area and prohibit unrelated personnel from approaching.
2. Fire response: In case of a fire, immediately use the fire-fighting equipment provided with the vehicle to extinguish the fire and call the fire alarm number to report it. I have been in Pujiao before
During the process, one should pay attention to self-protection and avoid burns or poisoning
3. Personal injury: If any personnel are injured, immediate initial treatment should be provided and emergency medical assistance should be provided by calling the emergency hotline.