Guangzhou HongCe Equipment Co., Ltd.
| Packaging Details | Plywood |
| Delivery Time | 30 days |
| Payment Terms | T/T |
| Supply Ability | 15 set per month |
| Conforms to standard | IEC60695-2-20,GB4943 |
| Anneal holder distance | 250mm |
| Heating coil | ф0.5mm,Ni80/Cr20 |
| Cold resistance | 5.28Ω/m |
| Place of Origin | China |
| Brand Name | HongCe |
| Certification | TUV、ITS、CSA、BV、SGS 、CNAS(cost additional) |
| Model Number | HWI-1 |
View Detail Information
Explore similar products
Needle Flame Test Apparatus For Fire Hazard Testing Touch Screen Operation
IEC60695-2-10 Flammability Testing Equipment PLC Control
IEC60332-1 Flammability Testing Equipment For Single Insulated Wire Or Cable
IEC60695 220V / 50Hz Horizontal And Vertical Flame Tester - 50W And 500W
Product Specification
| Packaging Details | Plywood | Delivery Time | 30 days |
| Payment Terms | T/T | Supply Ability | 15 set per month |
| Conforms to standard | IEC60695-2-20,GB4943 | Anneal holder distance | 250mm |
| Heating coil | ф0.5mm,Ni80/Cr20 | Cold resistance | 5.28Ω/m |
| Place of Origin | China | Brand Name | HongCe |
| Certification | TUV、ITS、CSA、BV、SGS 、CNAS(cost additional) | Model Number | HWI-1 |
| High Light | IEC 60695 Flammability Testing Equipment ，250mm Flammability Testing Equipment | ||
Lab Equipment IEC60695 Hot Wire Ignition Tester , HWI Test Equipment
Product information:
This tester conforms to the standard requirement of IEC60695-2-20. It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time.
Hot-wire coil ignition test adopts the specific size(ф0.5mm length:250mm)and specific material (Ni80/Cr20) of heater strip which is pre-annealed with required heating power(0.26W/mm) and time(8s～12s). Then coil heater strip on the specimen for 5 cycles according to certain wire wrapping tension (5.4N) and certain wire wrapping distance (6.35mm). Next, take the specimen with wrapping heater strip to test until 120s under the stipulate heating power (0.26W/mm) the users can judge the fire risk according to whether the specimen ignite and the ignite time.
Technical parameters:
| Parameter model | HWI-1 |
| conforms to standard | IEC60695-2-20,GB4943 |
| Heating coil | ф0.5mm,Ni80/Cr20,length:250mm±5mm ,cold resistance 5.28Ω/m |
| Anneal holder distance | 250mm |
| Specimen holder distance and height | 70mm,high:60mm(the distance between the holder surface to the connector plate surface) |
| Wire wrapping tension and its distance | 5.4N±0.05N,6.3mm±0.2mm(within 31.5mm±0.5mm,coil 5 cycle,national standard is 6mm) |
| Annealing time and power | 8s～12s(1s～999.9s digital display can be preset),0.26W/mm±4%(digital display is adjustable) |
| Testing time and power | 120s(1s～999.9s digital display can be preset),0.26W/mm±4%( digital display is adjustable) |
| Specimen size | L×W×H:(125 ± 5mm) ×(13.0 ± 0.5mm) ×(0.75+0.075 0mm,1.5+0.15 0mm,3+0.3 0mm)[ national standard is 0.75± 0.1 mm,1.5± 0.1 mm,3± 0.2 mm] |
| Combustion box volume | Greater than0.5 cube(can be order 0.75 cube,1cube) |
| Power supply | AC 220V±10%,50Hz；110V,60Hz |
Hot Wire Ignition Test is a type of resistance test to fire for materials of enclosures and decorative parts. The sample is put on a specified stand and an element wire is winded around the material to be tested
Technical specification
The test sample is sourced by DC power
Element Wire 80% Nickel and 20% Chromium – 3 bobbins included
Power consumption 0.26 W/mm – means a current of 7 A to passes through the element wire
Digital Ammeter and Voltmeter
Terminal to connect the element wire
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!