Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 10 set per month |
| Delivery Time | 25 days |
| Packaging Details | Plywood |
| Weight | 2.5N*1, 1N*1 |
| Arm of force | 0-200mm |
| Plug | UL plug*1, Australia plug*1,all-purpose plug*1 |
| Conforms to standard | IEC60884,VDE0620,IEC60598,IEC60065 Fig11 |
| Brand Name | HongCe |
| Model Number | SOB-1 |
| Place of Origin | China |
| Certification | Calibration Certificate(cost additional) |
View Detail Information
Explore similar products
IEC 60811 Natural Convection Oven Heating Chamber 8-20 Air Changes Per Hour
IEC 60745-2-1 Electric Hammer Durability Test Apparatus Steel Ball Diameter 38mm
IEC Testing equipment Inductive Load Bank With 3 Test Stations Output Current
IEC 60745-2-5 Testing Equipment For Circular Saw Switch And Lower Guard
Product Specification
| Payment Terms | T/T | Supply Ability | 10 set per month |
| Delivery Time | 25 days | Packaging Details | Plywood |
| Weight | 2.5N*1, 1N*1 | Arm of force | 0-200mm |
| Plug | UL plug*1, Australia plug*1,all-purpose plug*1 | Conforms to standard | IEC60884,VDE0620,IEC60598,IEC60065 Fig11 |
| Brand Name | HongCe | Model Number | SOB-1 |
| Place of Origin | China | Certification | Calibration Certificate(cost additional) |
| High Light | iec testing equipment ，iec tester | ||
IEC60065 Figure 11Test Apparatus For Devices Forming A part Of The Mains Plug
Device forming a part of the mains plug
A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets.
Compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus as shown in figure 11. The balancing arm of the test apparatus pivots about a horizontal axis through the centre lines of the contact tubes of the socket-outlet at a distance of 8 mm behind the engagement face of the socket-outlet.
With the device not in engagement, the balancing arm is in equilibrium, the engagement face of the socket-outlet being in the vertical position.
After the device has been engaged, the torque to be applied to the socket-outlet to maintain its engagement face in the vertical plane is determined by the position of a weight on the balancing arm. The torque shall not exceed 0.25 Nm.
Note: This test is compatible with the test described in the IEC 60884-1.
Technical parameters:
| weight | 2.5N*1, 1N*1 |
| Plug | UL plug*1, European plug*1,all-purpose plug*1 |
| Conforms to standard | IEC60884,VDE0620,IEC60598,IEC60065Fig11 |
| Arm of force | 0-200mm |
| The distance from the contact surface and the Axis of the surface | 8mm |
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!