Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 10 set /month |
| Delivery Time | 30 days |
| Packaging Details | Plywood |
| standard | IEC60529 |
| Control | PLC intelligent control |
| Needle hole | Φ0.4mm |
| Water flow | 1-10L/min adjustable |
| Testing time | 0.01S～99hours 59min，can be preset |
| turntable diameter | 600/800/1000mm |
| Brand Name | HongCe |
| Model Number | HH0802 |
| Certification | calibration certificate (cost additional)A |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC60529 IPX5 IPX6 Ingress Protection Test Equipment Sand And Dust Test Chamber
IEC 60592 IPX1 To IPX8 Waterproof Ingress Protection Test Equipment
IPX5 IPX6 Ingress Protection Test Equipment With Digital Flow Meter
IPX34 Integrated Waterproof Ingress Protection Test Equipment 576L Chamber IEC
Product Specification
| Payment Terms | T/T | Supply Ability | 10 set /month |
| Delivery Time | 30 days | Packaging Details | Plywood |
| standard | IEC60529 | Control | PLC intelligent control |
| Needle hole | Φ0.4mm | Water flow | 1-10L/min adjustable |
| Testing time | 0.01S～99hours 59min，can be preset | turntable diameter | 600/800/1000mm |
| Brand Name | HongCe | Model Number | HH0802 |
| Certification | calibration certificate (cost additional)A | Place of Origin | China |
| High Light | waterproof tester ，material testing equipment | ||
IEC60529 IPX3 / IPX4 PLC Control 0.4mm Needle Hole Oscillating Tube Open Type Tester
Product information:
Oscillating tube tester is designed and manufactured in accordance with the standard requirement of IEC60529 IPX3 and IPX4,IEC60335-1 clause 15.1. It is used for the waterproof test of the electrical equipment.
The oscillating tube part of this device is controlled by adjustable-speed motor and crank-link mechanism. This device is reciprocating swing from the place of ±60°to another one of ±175°with the speed required by the standard through machine adjusting angle.
The angle adjustment is accurate. The structure is stable and durable. It is equipped with rotating stage through which the rotating of 90°can be achieved. It is also equipped with clean water filtration unit to prevent the pinhole from jamming.
Technical parameters:
| No. | Item | parameters |
| 1 | Water supply | Water flow rate＞10L/min±5% clean water without inclusion. This device is equipped with clean water filtration unit |
| 2 | The size of the oscillating tube | Come with R200, R400, R600, R800, R1000, R1200, oscillating tube (R1400,R1600mm can be optional), stainless steel |
| 3 | Water hole | Φ0.4mm |
| 4 | Included angle of two holes | IPX3:120°; IPX4:180° |
| 5 | pendulum angle | IPX3:120°; IPX4:360° |
| 6 | Raining speed | IPX3:4s/time(2×120°); IPX4:12s/time(2×360°); |
| 7 | Water flow | Can be set according to the size of the pendulum and the number of the pin holes (0.07 L/minX per hole) |
| 8 | Testing time | 0.01S～99 hours 59mins,can be preset |
| 9 | Pressure gauge | 0~0.25MPa |
| 10 | Site requirements | Dedicated IP waterproof test room, The ground should be flat with illumination 10A waterproof leakage switch(or socket)used for equipment. With good function of inflow and drainage. Ground installation |
| 11 | The area | According to the oscillating tube chose |
Main configuration:
| No. | Name | Specifications | Quantity | Remarks |
| 1 | Oscillating tube | R1000,R1400 | 1 | Configuration |
| 2 | Oscillating tube drive | Stainless steel cover,Worm gear reducer drive | 2 | There are one high and low pressure drive shaft and tailstock, high-axis for large swing tube, low shaft is for the small swing tube. |
| 3 | Support the tailstock | Industrial Molding Aluminum | 1 | |
| 4 | Servo motor | 750W,Matsushita Electric Works | 1 | |
| 5 | Rotating water head | 1/2″ | 1 | |
| 6 | Water spray needle seat | M5 cone seat,Stainless steel | 240 | Includes spare needle holder |
| 7 | Stainless steel needle mouth | φ0.4mm | 240 | Includes spare needle tip |
| 8 | Blocking head | Sealed ball | 50 | Spare parts |
| 9 | Angle indicator | 0-360° | 1 | |
| 10 | Ball valves | 1/2″,Exclude stagnant water | 1 |
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!