Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 10 set /month |
| Delivery Time | 30 days |
| Packaging Details | plywood |
| working size | 1000L can be customized |
| control | PLC |
| Test sand (or talc) dosage | 2kg/m³ |
| Test dust | dry talc |
| Sand and dust concentration | 2～4kg/m3 |
| Air flow speed | ≤2m/s |
| Brand Name | HongCe |
| Model Number | HH0810 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Test Sphere Probe Ingress Protection Test Equipment IEC61032 Fig.1 With Force
IEC61032 Figure 3 Test Finger Probe Test Rod Probe C 2.5mm
Test Rod Probe D Test Finger Probe IEC61032 Figure 4 Safety Testing Apparatus
12.5 mm Test Sphere Probe 2 With Handle , IEC61032 Figure 6 Probe 2 Test Probe
Product Specification
| Payment Terms | T/T | Supply Ability | 10 set /month |
| Delivery Time | 30 days | Packaging Details | plywood |
| working size | 1000L can be customized | control | PLC |
| Test sand (or talc) dosage | 2kg/m³ | Test dust | dry talc |
| Sand and dust concentration | 2～4kg/m3 | Air flow speed | ≤2m/s |
| Brand Name | HongCe | Model Number | HH0810 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | 1000L Dust Test Chamber ，IPX5X Dust Test Chamber ，IPX6X Dust Test Chamber | ||
IEC60529 IPX5X IPX6X Sand And Dust 1000L PLC Control Test Chamber Figure 2
Product Introduction
The sand and dust test chamber is designed and manufactured according to IEC60529-2001 < Degrees of protection provided by enclosure (IP code)> Fig 2, IEC60598-1-2008 and etc. It artificially simulates the dust environment to test the dust-proof ability of the test samples.
The test device is suitable for electrical products’ sand and dust test of first characteristic numeral 5 and 6 (IPX5 and IPX6). It is used to test sealing parts and enclosure’s sand and dust resistance capacity of the electrical and electronic products, car and motorcycles spare parts and seals. In order to detect the use, storage, transport performance of the electrical and electronic products, car and motorcycles spare parts and seals under the sand and dust environment.
The chamber can provide a non-laminar flow of dust-loaded vertically circulating air, can be timed controlled; also be equipped with a vacuum pump which can vacuum the test sample, the exhaust volume and pressure can be adjusted; in addition, the inside chamber is configured with a airflow temperature control device, to ensure that the test is under standard environmental conditions.
The test equipment uses intelligent and humanized PLC control system, the inner of the test equipment is made of high quality SUS304 stainless steel, the enclosure is A3 plate electrostatic spraying. And it is also having large observation window and manual wiper device. The security protection is good.
Function parameters:
| Model | HH0810 | |
| Working size(mm) | W1000*D1000*H1000 | |
| Outer size (mm) | L1850*W1350*H1800 | |
| Main technical parameters | Temperature range | Room temperature |
| Test dust | dry talc which can go through the sieve of 75μm and the square sieve of wire diameter 50μm. | |
| Test sand (or talc) dosage | 2kg/m³
| |
| Vacuum pump | Ultimate vacuum:2Pa | |
| Air pressure meter | 0~-1.0Mpa | |
| Sample rack height adjustment range | 0~750MM
| |
| Timing range
| 0~99 hours 59 min | |
| Timing accuracy
| ±1min | |
| Load cycle control
| 0~99 hours 59 min | |
| Ash blowing cycle control
| 1s~9999 min | |
| Sand and dust concentration | 2～4kg/m3 | |
| Air flow speed | ≤2m/s | |
Operation Instructions
The structure and working principle of the sand and dust test chamber is the same as the requirements of IEC60529-2001. It is with an addition of flow heating device, in order to work under low ambient temperature and heavy humidity conditions. Firstly, put the standard dry talc ( 2kg / m³ ) into the test chamber, then put the sample into the test chamber, after that, start the fan, to achieve a high density dust cloud in the test chamber, until reach to the set running time (generally 8h).
Please click here user manual HH0810.pdf to get the user manual .
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!