Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 10 set /month |
| Delivery Time | 30 days |
| Packaging Details | Plywood |
| Control | PLC |
| Spray nozzle | 12.5mm |
| Water jet pressure | 100～150kpa |
| Sample turntable | Ø600mm |
| IPX6 Spray Flow | 100L/min±5% |
| Sample turntable rotation speed | 1~5r/min (adjustable) |
| Brand Name | HongCe |
| Model Number | IPX6 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Test Sphere Probe Ingress Protection Test Equipment IEC61032 Fig.1 With Force
IEC61032 Figure 3 Test Finger Probe Test Rod Probe C 2.5mm
Test Rod Probe D Test Finger Probe IEC61032 Figure 4 Safety Testing Apparatus
12.5 mm Test Sphere Probe 2 With Handle , IEC61032 Figure 6 Probe 2 Test Probe
Product Specification
| Payment Terms | T/T | Supply Ability | 10 set /month |
| Delivery Time | 30 days | Packaging Details | Plywood |
| Control | PLC | Spray nozzle | 12.5mm |
| Water jet pressure | 100～150kpa | Sample turntable | Ø600mm |
| IPX6 Spray Flow | 100L/min±5% | Sample turntable rotation speed | 1~5r/min (adjustable) |
| Brand Name | HongCe | Model Number | IPX6 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | IPX6 Spray Test Machine ，PLC Spray Test Machine ，Waterproof Spray Test Machine | ||
IEC60529 IPX6 Strong Spray Machine PLC Control Stainless Steel 12.5mm Waterproof Tester
Product Introduction
The spray test system is designed and manufactured according to the standard IEC60529<<Degrees of protection provided by enclosures (IP Code)>>, used to test waterproof performance of the electrical products which second characteristic is numeral 6.
This machine is suitable for enclosure protection rating evaluation of electrical appliances and electronic equipment, against the harmful effects due to water entering the housing of the device.
Specifications for sample turntable:
Technical parameters:
| Model | IPX6A |
| IPX6 Spray aperture (mm) | Ø12.5mm |
| IPX6 Spray Flow | 100L/min±5% |
| IPX6 Flowmeter | 10-110L/min one piece |
| The distance of IPX6 nozzle mouth to test products | 2.5m-3m |
| Water jet pressure | 100～150kpa(Adjust by water flow ) |
| Timer | 1－9999Min |
| Sample turntable | Ø600mm, |
| Sample turntable rotation speed | 1~5r/min (adjustable) |
| Sample turntable material | SUS304# stainless steel |
| Reservoir (L) | 500L |
| Reservoir material | SUS304# stainless steel |
| Breaker | No fuse breaker |
| Protective | Leakage, No water , short-circuit |
Preparation Before Test
Close the main power switch, the system is powered, and the power indicator is on.
1.Installation of Turntable
Connect the turntable connecting line to the turntable interface on the equipment.
2.Installation of Spray Nozzles
Install the nozzle on the bracket. And the distance from the sample on the turntable to keep the distance of 2.5-3 meters
3.Installation of the water inlet pipe and water outlet pipe
Connect the inlet pipe to the inlet port, and the rest is connected to each outlet according to function.
Safety Warning
1. This equipment is powered by high voltage and must be protected against electric shock during use. The operator must strictly abide by the operating procedures and the metal casing that the equipment enclosure and personnel touch must be well grounded.
2. If you hear an abnormal sound during operation, please stop the machine and check it again before restarting it, so as not to affect the service life of the equipment.
3. After the equipment is positioned, the support frame should be propped up to prevent the casters from being shaken after the equipment is tested.
4. The equipment runs for a long time. If the water spray hole is found to be blocked, the pipeline must be removed, rinsed with tap water and then assembled.
5. Clean water tank regularly to keep it clean.
How to operate this equipment ?Click here user manual IPX6.pdf to get the operation method.
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!