Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 20 set per month |
| Delivery Time | 20 working days |
| Packaging Details | plywood |
| Standard | UL1581, JIS C3112 |
| Test | Deformation |
| Stations | 3 |
| Upper end diameter of pressure bar | Φ19±0.2mm |
| Lower end diameter of pressure bar | Φ9.5±0.2mm |
| Product Name | Deformation Test Apparatus |
| Warranty | 1 Year |
| Pressure Bar | 250g |
| Brand Name | HongCe |
| Model Number | HDX1312 |
| Certification | Third part calibration certificate(cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC60245-1 Cable Testing Equipment For Resistance To Heat Of Tectile Braids Test
3000W Mineral Oil Immersion Test Apparatus Six Groups Working Stations
Three Stations IEC60811-1-4 Cable Testing Equipment
Manual Operation Cold Bend Test Apparatus For Cables External Diameter Less Than
Product Specification
| Payment Terms | T/T | Supply Ability | 20 set per month |
| Delivery Time | 20 working days | Packaging Details | plywood |
| Standard | UL1581, JIS C3112 | Test | Deformation |
| Stations | 3 | Upper end diameter of pressure bar | Φ19±0.2mm |
| Lower end diameter of pressure bar | Φ9.5±0.2mm | Product Name | Deformation Test Apparatus |
| Warranty | 1 Year | Pressure Bar | 250g |
| Brand Name | HongCe | Model Number | HDX1312 |
| Certification | Third part calibration certificate(cost additional) | Place of Origin | China |
| High Light | JIS C3112 Thermal Deformation Test Apparatus ，3 Stations Thermal Deformation Test Apparatus ，Cable Deformation Test Apparatus | ||
JIS C3112 Thermal Deformation Test Apparatus for Cable 3 Stations
Product information:
This Thermal Deformation Test Apparatus is used to measure the thermal deformation rate of the most commonly used insulation and sheath materials (elastomer, polyvinyl chloride, polyethylene, polypropylene, etc.) of wires and cables at high temperature.
It is made of brass and includes 3 copper rods that move vertically on the support frame. The entire unit is designed to be used in a heating oven. Each rod should be straight with diameter of 0.750 ± 0.010 in Or 19.0 ± 0.2mm. Each copper rod weighs 250g. The lower end of each copper rod is reduced to 0.375 ± 0.010in or 9.5 ± 0.2mm in the last 3 / 4in or 19mm section. The lower end of the reduced section shall be flat and round, without sharp edges, which are both concentric with and perpendicular to the longitudinal axis of the rod. The lower end of the reduced diameter portion acts as a presser foot to hold the specimen during the test. The force on the sample shall be the sum of the weight of the copper rod (250g or 2.45N) plus the weight of the upper end of the copper rod with a weight such that the total pressure is equal to the load force specified by the cable. Each weight shall be engraved accurate weight value.
Tray: used to place weights and apply additional gravity to the specimen. Cable Testing Equipment
Weight: 150g, 500g, 1000g, 3 pieces each, 100g, 6 pieces.
Foot pad: the distance between the lower copper plate and the supporting surface can be adjusted to prevent scratching the supporting surface. Cable Testing Equipment
Standard:UL-1581 Reference standard for electrical wires,cables and flexible cords,JIS C3112 clause 541-559 and 560.
Application:For measuring the deformation test of wire under a certain temperature and load.
Test sample:For the thermoplastic-insulated, thermoset-insulated,or other wire.
Feature:It need to combine with the aging chamber to use. The device is provided with a tray, which can be filled with the corresponding weight according to the requirement. Cable Testing Equipment
Technical parameters:
| Test | Thermal deforamtion test |
| Test object | Cable, wire |
| Stations | 3 |
| Upper end diameter of pressure bar | Φ19±0.2mm |
| Lower end diameter of pressure bar | Φ9.5±0.2mm |
| Total weight of pressure bar | 250g Cable Testing Equipment |
| Size | 310*70*120mm(L*W*H) |
| Reference standard | UL1581, JIS C3112 clause 541-559 and 560 |
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!