Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 100 sets per month |
| Delivery Time | 3 days |
| Packaging Details | Aluminum box |
| Name | Test Probe D With Force |
| Model | HT-I04T |
| Warranty | 1 Year |
| Stop Face | 35mm |
| Stop Face Material | Nylon |
| Rigid Test Wire | 100mm |
| Diameter | 1mm |
| Force | 1N |
| Brand Name | HongCe |
| Model Number | HT-I04T |
| Certification | Calibration certificate(cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
4mm Hazardous Live Parts Probe Test Finger Probe IEC 1010 / IEC60065 / EN61010-1
IEC 1010 / IEC60335-2-25 Test Finger Probe Anti - Electric Shock Testing Machine
String Light Flat Test Finger Probe IEC60598-2-20 Clause 20.11.2.
Scratch Resistant Pin Electric Safety Testing Probes IEC60335-1 clause 21
Product Specification
| Payment Terms | T/T | Supply Ability | 100 sets per month |
| Delivery Time | 3 days | Packaging Details | Aluminum box |
| Name | Test Probe D With Force | Model | HT-I04T |
| Warranty | 1 Year | Stop Face | 35mm |
| Stop Face Material | Nylon | Rigid Test Wire | 100mm |
| Diameter | 1mm | Force | 1N |
| Brand Name | HongCe | Model Number | HT-I04T |
| Certification | Calibration certificate(cost additional) | Place of Origin | China |
| High Light | Diameter 1mm Test Probe ，IEC 60529 Test Probe ，Length 100mm Test Probe | ||
Length 100mm Diameter 1mm - Test Probe D With 1 N Force Scale Display IEC60529
The 1mm test rod meets IEC61032 figure 4 test probe D and EN Standards including IEC60529 for IP4 and suffix D codes. It is used to verify the protection of persons against access to hazardous parts. Also it is used to verify the protection against access with a tool. The handle and stop face are made of nylon. The rod is made of stainless steel, with dynamometer.
Product information:
This probe conforms to the standard requirement of IEC61032 figure 4 test probe D and IEC 62368-1 Figure V.5, IEC 60065:2014 clause 9.1.4, and etc. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire.
Customizable: It can be used for anti-electric shock test when equipped with amphenol connector. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer) .The probe whose model number is with "T" is with force.
Main specification and corresponding technical parameters:
| Model | HT-I04T |
| Name | Test rod probe with force |
| Diameter of the metal wire | Ф1+0.05 0 |
| Sphere diameter | SФ35±0.2 |
| Handle diameter | Ф10 |
| Probe length | 100±0.2 |
| Handle length | ---- |
| Force | With force of 1N |
| Applied standard | IEC60529 |
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!