Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | T/T,L/C |
| Supply Ability | 10 set per month |
| Delivery Time | 60 days |
| Packaging Details | Plywood |
| Standard | IEC 60112, IEC60695 and etc |
| Product name | Leakage Tracking Tester |
| Control operation mode | Electrical control or PLC control |
| Electrode spacing | 4±0.1mm |
| Electrode pressure | 1±0.05 N |
| Testing voltage | 0-600V adjustable |
| Drip delay | 0.2S |
| Drip size | 45 ~ 50 drops / cm3 |
| Working voltage | 220V/50Hz,1KVA |
| Brand Name | HongCe |
| Model Number | LT-3 |
| Certification | Calibration certificate(cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Needle Flame Test Apparatus For Fire Hazard Testing Touch Screen Operation
IEC60695-2-10 Flammability Testing Equipment PLC Control
IEC60332-1 Flammability Testing Equipment For Single Insulated Wire Or Cable
IEC60695 220V / 50Hz Horizontal And Vertical Flame Tester - 50W And 500W
Product Specification
| Payment Terms | T/T,L/C | Supply Ability | 10 set per month |
| Delivery Time | 60 days | Packaging Details | Plywood |
| Standard | IEC 60112, IEC60695 and etc | Product name | Leakage Tracking Tester |
| Control operation mode | Electrical control or PLC control | Electrode spacing | 4±0.1mm |
| Electrode pressure | 1±0.05 N | Testing voltage | 0-600V adjustable |
| Drip delay | 0.2S | Drip size | 45 ~ 50 drops / cm3 |
| Working voltage | 220V/50Hz,1KVA | Brand Name | HongCe |
| Model Number | LT-3 | Certification | Calibration certificate(cost additional) |
| Place of Origin | China | ||
| High Light | IEC 60112 tracking index test apparatus ，flammability testing equipment for electrical insulation ，CTI PTI evaluation testing equipment | ||
Hey, for those labs where safety is top priority, HongCe came up with this Tracking Index Tester. It checks if solid materials can stop electrical leaks when things get dirty or wet. It has steady controls, drips liquid just right, and is built to last.
If you're in manufacturing, testing, or signing off on products, this tester helps make sure insulation follows IEC 60112 standards, along with similar guidelines . Use it daily!
Where, in IEC standards for material or for electrical equipment specifications, or in other standards, a proof test only is required, 50 drop tests shall be made in accordance with Clause 8 but at the single voltage specified. The required number of specimens shall withstand the test period up to at least 25 s after the fiftieth drop has fallen without tracking failure, and without a persistent flame occurring.
Operation of the over-current device by air arcs does not constitute a tracking failure.
The proof voltage shall be an integer multiple of 25 V.
Determination of the comparative tracking index requires the determination of the maximum voltage at which five specimens withstand the test period for 50 drops without failure and whether, at a voltage of 25 V lower than the maximum 50 drop figure, the specimen withstands 1 00 drops. If this is not the case, the maximum 1 00 drop withstand voltage has to be determined.
| Model | LT-2(0.5m³) | LT-3(0.5m³) (Touch screen) |
| Working voltage | 220V/50Hz, 1KVA | 220V/50Hz, 1KVA |
| Control operation mode | Electrical control, button operation | PLC control, 7 inch color touch screen operation, with infrared remote control |
| Testing voltage | 0-600V adjustable, precision 1.5% | |
| Timing device | 9999X0.1S. Flammability Testing Equipment | |
| Electrodes | Material: Platinum electrode and brass connecting rod | |
| The two electrodes shall have a rectangular cross-section of (5 ± 0,1 ) mm * (2 ± 0,1 ) mm, with one end chisel-edged with an angle of 30° ± 2° (see Figure 1 ). The sharp edge shall be removed to produce an approximately flat surface, 0,01 mm to 0,1 mm wide | ||
| Relative position of electrode | Included angle: 60°±5°, distance is 4±0.1mm | |
| Electrode pressure | 1.00N±0.05N | 1.00N±0.05N, Touch screen display |
| Dripping liquid | The interval time of dropping liquid: 30±5S, digital display, can be preset | |
| Height: 35±5mm | ||
| The number of drips:0-9999 times, can be preset, the volume size of the dripping liquid is controlled by the imported micro pump within 50 ~ 45 drips /cm³ | ||
| Test solutions | Solution A: 0.1%NH4Cl, 3.95±0.05Ωm, Solution B: 0.1%NH4Cl + 0.5± 0.002% sodium-di-butyl naphthalene sulfonate, 1.98±0.05Ωm | |
| Time-delay circuit | 2±0.1S (in 0.5A or larger current) | |
| Short-circuit pressure drop | 1±0.1A 1%, pressure drop 8% MAX | |
| Wind speed | 0.2m/s. | |
| Environmental requirement | 0～40℃, relative humidity≤80%, in the place of no obvious vibration and corrosive gas | |
| Dimensions and weight | WDH=1100*550*1200 mm, 130kg | WDH=1100*550*1200 mm, 130kg |
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!