Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | L/C, T/T |
| Supply Ability | 10 sets per month |
| Delivery Time | 30 days |
| Packaging Details | Plywood |
| Brand Name | HongCe |
| Model Number | HETE-WPT-9 |
| Certification | Calibration certificate(cost additional) |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
20N Heat Resistance Verification Compression Test Apparatus IEC60884-1 Figure 38
IEC60884-1 Clause 30.1 Figure 41 High Temperature Indentation Device
Valve Pressure Holding Test Machine High Pressure DN15–DN1200 ISO 5208 IEC 60529
Iec 60034 High-Pressure Water Pump Test Bench Comprehensive Performance Test
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 10 sets per month |
| Delivery Time | 30 days | Packaging Details | Plywood |
| Brand Name | HongCe | Model Number | HETE-WPT-9 |
| Certification | Calibration certificate(cost additional) | Place of Origin | CHINA |
| High Light | Water Ring Vacuum Pump Test Bench ，Vacuum Pump Test Bench Automated Clamping ，Pump Testing Machine EV | ||
Electric Vehicle Water Ring Vacuum Pump Comprehensive Performance Test Bench Automated Clamping 80m³/h Capacity
Short Description
The WPT-9 Pump Testing Equipment is an advanced automated test bench designed for electric vehicle water ring vacuum pumps. It integrates robotic clamping, full-performance simulation, and multi-condition testing, delivering high-precision, efficient, and traceable testing for OEMs and Tier 1 suppliers.
Product Introduction
WPT-9 sets a new standard in the field of electric vehicle vacuum pump testing. Equipped with a six-axis robotic clamping system and full-spectrum test environment simulation, it supports precise, automated, and repeatable testing for a wide range of pump models and configurations. Designed to meet international benchmarks, this system enables reliable performance validation under dynamic automotive-grade conditions.
Product Features
Automated Clamping System
Fast model switching (within 5 minutes) with ±0.1mm positioning accuracy, compatible with G1/4" to G3/8" pump ports.
Full Environmental Simulation
Simulates extreme temperature (-40℃~125℃), humidity (10%-95% RH), and pressure conditions, supporting AEC-Q100 and ISO standards.
High-Precision Measurement
Vacuum, flow rate, power, vibration, and noise are monitored in real-time. Vacuum accuracy reaches ±0.1kPa.
Data Management & Traceability
Real-time CAN/LIN data acquisition, 256GB SSD storage, PDF report generation for ISO 9001 compliance.
Advanced Safety Protocols
Dual-layer overpressure protection, vibration-based early failure diagnosis, and compliance with IEC 60664-1 and EVS-GTR standards.
Modular Design
Expandable with refrigerant loop (-50℃), high-pressure gas (up to 10 bar), and hydrogen embrittlement modules.
International Reference Standards
|
Standard |
Section |
Description |
|---|---|---|
|
ISO 28580:2013 |
5.3 |
Vacuum-flow curve testing for EV pumps |
|
GB/T 32864-2016 |
5.4, 5.7 |
Electric pump efficiency & low-temp start |
|
AEC-Q100 Rev-E |
5, 9 |
Temperature cycle & vibration tests |
|
IEC 60068-2-1 |
Nb |
-40℃ endurance (72h no failure) |
|
EVS-GTR Phase 2 |
5.3 |
Electrical insulation (≥10MΩ), 1500Vdc withstand |
|
CISPR 25:2021 |
Class 3 |
Radiated EMI ≤40dBμV/m (30~1000MHz) |
Application Scope
Primary Test Objects:
EV water ring vacuum pumps (0.1–3kW, 5–80m³/h)
Hybrid vacuum booster pumps (oil/water-cooled)
Hydrogen fuel cell vacuum systems (high-pressure, anti-hydrogen embrittlement)
Core Test Categories
|
Category |
Test Items |
|---|---|
|
Performance |
Vacuum vs. Flow, Power vs. Efficiency, Recovery Time |
|
Environment |
Cold Start (-40℃), Heat Endurance (125℃), Salt Spray (48h) |
|
Reliability |
Durability (500h), Thermal Shock (1000 cycles) |
|
Safety & EMC |
Insulation, Ground Resistance, Radiated EMI |
|
Automation |
Clamping Accuracy, Seal Pressure Adaptability |
Technical Specifications
|
Parameter |
Details |
|---|---|
|
Model |
WPT-9 |
|
Test Vacuum Range |
1–100kPa (±0.1kPa Accuracy) |
|
Flow Rate Range |
0–80m³/h (±0.5%FS) |
|
Temperature Range |
-40℃ to +125℃ (±1℃ Accuracy) |
|
Humidity Range |
10%–95%RH (Non-condensing, Optional) |
|
Power Input for DUT |
12V / 24V / 48V DC |
|
Drive Power Range |
0–3kW (0.1W Resolution, ±0.5% Accuracy) |
|
Vibration Detection |
0–200m/s², 3-Axis (±5%) |
|
Noise Range |
30–100dB (±1dB @ 1m) |
|
Clamping System |
Robotic Arm + Pneumatic Clamps (±0.1mm) |
|
Control Interface |
12” Industrial Touchscreen (Multi-language) |
|
Data Storage |
256GB SSD, 200,000+ Logs, CAN/LIN Output |
|
Protection Rating |
IP67 (Test Chamber), IP54 (Controller) |
|
Power Supply |
AC220V/380V ±10%, 50/60Hz, 80kVA |
|
Dimensions |
3500×2500×2300mm (L×W×H) |
|
Weight |
3000kg |
|
Communication |
CAN / LIN / RS485 / Modbus / OPC UA |
After-Sales & Service
We provide comprehensive technical support, remote diagnostics, on-site training, and software updates. Our global service network ensures minimized downtime and optimal system performance.
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!