OEM ODM Polyester Filter Cartridge Dust Collector

Product Specification

Pulse Jet Bag Compact Industrial Dust Collector Polyester Filter Bag Dust Separator

Product overview

Industrial dust collector is widely used in building, metallurgy, mining, stone processing industries and etc., it owns dust-containing gas purification treatment system, is the ideal equipment for environmental dust removal.

The bag-type dust collector is a small and medium-sized dust collector designed after digesting and absorbing the advanced technology of similar foreign products. The dust collector adopts the technology of high-pressure (0.5~0.7MPa) large-flow pulse valve to inject dust from filter bags one by one.

Compared with other dust collectors, it has the characteristics of large dust removal energy and high efficiency. And small size, light weight, simple and compact structure, easy installation, convenient maintenance (external filter type).

Most of the cartridge dust collectors are used in the workplaces of the factory production workshops and those places with higher environmental requirements. Compared with the general dust collectors, the filter cartridge dust collectors are smaller in size and have less resistance to operation, so they work particularly well. The speed of operation is also large, and the work efficiency is good.

Operating principle of dust collector

1. The dust laden air enters the dust collector from the air inlet and is filtered through the filter bag to be clean air. The exhaust air coming out of air outlet is exhausted by the Fan.

2. As the amount of filtered gas increases, the dust accumulated on the outer surface of the filter bag increases, so the dust collector working resistance is also increasing.
 

3. The resistance of the dust collector should not be over 1200 Pa, to maintain the continuous running, the filter bag must be cleaned regularly. Our dust remover is equipped with advanced electronic control system, with automatic monitoring function of pulse-jet cleaning to collected dust, so as to ensure the continuous operation of the dust collector.
 

4. Cleaning dust, also known as dust cleaning, is a timed start of the pulse valve setted by CNC program, to let the compressed air(0.5-0.7MPa) in the air pump be ejected from the orifice of the blowing pipe, when the compressed air pass through the Venturi tube of bag cage, the Venturi amplifies the pressure of the compressed air by several times. The high-pressure air entering the filter bag causes the filter bag to expand rapidly in a flash, and shakes off the dust by the reverse action of the airflow.

Advantages of bag dust collector

1. Newest pulse filter technology

2. Customized filter bags materials to choosen
 

3. Small size&light weight , easy to install and operate
 

4. 99.9% high working efficiency

5. Used for construction site,minging,chemical, coating,painting , food industary ,etcs.

Parameters of Bag dust collector

Advantages of cartridge dust collector

1. The filter cartridge uses imported polyester fiber as the filter material, and a layer of sub-micron ultra-thin fiber is adhered to the general filter material, and the arrangement of the fibers on the adhesion layer is very tight. Most of the sub-micron dust particles are blocked on the surface of the filter material;

2. Adopting advanced submerged flow layout and inclined filter cartridge structure, the dust collector has a good synchronous cleaning effect during the working process; the purification efficiency is high, and the purification efficiency is more than 99.9% for the dust above submicron, and the equipment operation resistance is low , Effectively save the energy consumption of the dust removal system.

3. Dust baffle is set at the dust and gas inlet, which has buffering and abrasion resistance, so that dust does not directly impact the filter cartridge at high speed, thus prolonging the service life of the filter cartridge; modular combination, the size can be selected at will, the original combination can be expanded, and dust removal can be increased The unit does not need to make too many changes to the original equipment.

4. The filter cartridge is installed in a drawer with a 15° inclined angle, which makes it easier to remove and replace the filter cartridge, and there are no transmission parts in the dust collector body, which minimizes the maintenance work. For general dust, the filter cartridge can be used for a long time without replacement, which eliminates the tedious work of frequently changing filter bags for common bag filters, and saves a lot of maintenance costs.

5. Because the filter material is folded into a cylindrical shape, the filter material is arranged with a high density, so the dust collector has a compact structure and a small volume; the filter area of the same volume dust collector is relatively large, the filtering wind speed is small, and the resistance is not large; the height of the filter cartridge is small, The installation is convenient, and the maintenance work is small.

Application

The industrial dust collector has the characteristics of large dust removal kinetic energy and high dust removal efficiency. It is widely used in building materials, metallurgy, mining, chemical, coal, non-metallic mineral ultrafine powder processing and other industries, dust-containing gas purification treatment system It is an ideal equipment for environmental protection and dust removal.