Electric Over Hydraulic Control Valve , Proportional Solenoid Solenoid Valve For

Product Specification

Product profile

The WE type directional control valve is an electromagnet operated reversing slide valve for controlling the opening and closing and flow direction of the oil.

This directional control valve mainly includes a valve body (1), one or two electromagnets (2), a control spool (3) and one or two return springs (4).

In the unenergized state, the control spool (3) is held in the middle or initial position by the return spring (4) (except the pulse valve), and the control spool (3) is wet.

Magnet (2) operation.

In order to ensure satisfactory operation, the pressure chamber of the electromagnet must be filled with oil.

The force of the electromagnet (2) acts on the control spool (3) via the push rod (5), pushing it from the initial position to the desired position, which causes the oil to flow from P to A, B.

To T or P to B, A to T free flow.

When the electromagnet (2) is de-energized, the control spool (3) is pushed to the initial position by the return spring (4).

Manual emergency operation (6) Controls the movement of the spool (3) when the solenoid is not energized.

WE6...L6X/O... type (only for functions A, C, D)

This valve is a two-position valve with a double electromagnet, and the spool has no fixed position in the de-energized state.

WE6...L6X/OF... type, pulse valve (only for functions A, C, D)

This valve is a two-position valve with a double electromagnet and a positioner that can be held in either position and the electromagnet does not have to be energized continuously.

Cartridges (WE6...L6X/.../B... type)

When it is necessary to limit the flow into the valve, it can be installed in port P.

Features and advantages

- Direct-acting electromagnet operated directional spool valve

- mounting surface according to DIN24 340 A

ISO 4401 and CETOP-RP 121H

- DC or AC solenoid with detachable coil

- Can replace the coil without oil

- electrical connection as a single connection or a neutral connection

Technical Parameters

Electrical parameters:

Note: When connecting the electrical appliances, the protective conductors must be grounded as specified.

Component size (dimension unit: mm)

Valve with DC or AC integral electromagnet

1 electromagnet

2 manual emergency operation

3.1 Plug-in connector according to DIN43650 (rotatable 90°)

3.2 Dechi socket

4 junction box with lead with light, M22 × 1.5 interface.

5 signs

6 O-ring 9.25 × 1.78

7 Plug for 1 solenoid valve

8 Remove the space required for the plug-in connector

9 Take down the space required for the coil

Valve with alternating current solenoid

1 electromagnet

2 manual emergency operation

3 Plug-in connector according to DIN43650 (rotatable 90°)

4 junction box with lead with light, M22 × 1.5 interface.

5 signs

6 O-ring 9.25 × 1.78

7 Plug for 1 solenoid valve

8 Remove the space required for the plug-in connector

9 Take down the space required for the coil

10 tightening nut, tightening torque MA=4Nm

11 valve fixing screw: M5×50 GB/T70.1-10.9

Remarks

4 hexagon socket screws UNC

10-24 UNC×2"ASTM-A574 (ordered separately)

(Coefficient of friction μ total = 0.19 to 0.24);

Tightening torque MA=11Nm[8.2ft-lbs]±15%

(Coefficient of friction μ total = 0.12 to 0.17);

Tightening torque MA=8Nm[5.9ft-lbs]±10%

If you need to connect the bottom plate, you must order it separately. Model are flowing

G341/01(G1/4), G341/02 (M14×1.5)

G342/01(G3/8), G342/02 (M18×1.5)

G502/01(G1/2), G502/02 (M22×1.5)