8 Tons/Hour Natural Gas Hot-Dip Galvanizing Line | 200-Ton Zinc Pot | High

Product Specification

8 Tons/Hour Natural Gas Hot-Dip Galvanizing Line | 200-Ton Zinc Pot | High-Efficiency Waste Heat Recovery System

WUXI WONDERY INDUSTRY EQUIPMENT CO., LTD. presents its Natural Gas Linear Environmentally Friendly Hot-Dip Galvanizing Production Line, designed for high-efficiency galvanizing of steel components. This advanced system is ideal for manufacturers seeking a hot-dip galvanizing line that combines high output with low energy consumption and strict environmental compliance.

The core of this galvanizing production line is a large-capacity zinc pot with internal dimensions of 11m (L) × 1.5m (W) × 2.0m (H) , holding 200 tons of zinc. It achieves a maximum hourly capacity of 8 tons, making it suitable for continuous, heavy-duty operation. The line uses natural gas as its primary heating energy (calorific value: 8400–8600×4.18 kJ/m³), with a patented waste heat recovery system that significantly reduces fuel consumption.

Key environmentally friendly galvanizing features include:

• An enclosed acid mist treatment room with negative pressure to prevent acid gas overflow.

• A dual-stage acid fume exhaust system (scrubber tower + neutralization tower) with automatic pH control.

• A zinc fume collection system with bag filter and water curtain deodorization.

• Patented waste heat utilization for heating the fluxing tank, drying galvanized parts, and preheating combustion air – saving approximately 3 m³ of natural gas per ton of galvanized steel.

The line also integrates an online weighing system, PLC temperature control (438–450°C for the zinc bath), and fully automatic ferric acid removal equipment for the flux solution. Optional waste acid regeneration equipment (sulfuric acid method) enables zero-emission recycling of hydrochloric acid.

All equipment is designed for easy integration into existing plants, with the buyer responsible for civil works, power supply to control cabinets, and compressed air supply. WUXI WONDERY INDUSTRY EQUIPMENT CO., LTD. provides installation guidance, training materials, and full documentation.

For a natural gas galvanizing furnace that delivers energy efficiency, environmental compliance, and high throughput, this production line is a complete solution

Industry Challenges & Causes

• Problem: Excessive Fuel Costs. High natural gas consumption often erodes the profit margins of large-scale galvanizing operations.

   

• Cause: Low Thermal Efficiency. Traditional systems allow significant heat to escape through flue gases without secondary utilization.

   

• Problem: Strict Environmental Audits. Increased scrutiny on "White Smoke" (zinc fumes) and acid mist makes old-style plants non-compliant.

   

• Cause: Inadequate Collection Infrastructure. A lack of negative-pressure enclosures and high-performance filtration leads to hazardous emissions.

Technical Parameters Tabl

FAQ

• Q: How much natural gas can the waste heat system save?

  A: By preheating air and auxiliary tanks, the system saves roughly 3 $m^3$ of gas per ton of galvanized steel compared to non-recovery models.

• Q: Is the combustion system safe for continuous operation?

  A: Yes, it includes ultraviolet flame detection and automatic/manual high-low ignition modes for maximum safety.

• Q: How do you manage the "White Smoke" during galvanizing?

  A: We use a double-sided suction system paired with a bag filter and water curtain deodorization to capture and neutralize zinc fumes.