Supercritical Rose Essential Oil Extraction Device Carbon Dioxide Extraction

Product Specification

Supercritical Carbon Dioxide Extraction Equipment Rose Essential Oil Extract

the above picture show you 5L+5L equipment 

Detail instruction of liquid Supercritical CO2 Extraction Device

Supercritical extraction technology is a green separation technology emerging in the world. So supercritical fluid refers to a fluid whose thermodynamic state is above the critical point (Pc, Tc). The critical point is the point where the gas-liquid interface just disappears. Supercritical fluid has physical and chemical properties, and its density is close to that of liquid. It is close to gas, but has the characteristics of large diffusion coefficient, low viscosity and dielectric constant. It has better separation effect and is an excellent solvent.

Supercritical extraction refers to the contact between the solvent in the extraction tank and the extract at a suitable temperature under high pressure, and the solute diffuses into the solvent, and then the operating conditions are changed in the separator to separate the dissolved substances.

I. Detail instractuon of the main Co2 oil extraction machine parts: 

1. This Co2 Extraction Machine mainly consists of separation kettle, fine distillation column, extraction kettle, CO2 high pressure pump, entrainer pump, refrigeration system, heat exchange system, purifying system, pressure stabilizing system of extraction kettle, CO2 tank, flow meter, temperature and pressure control( protection) system etc.

2. Exraction kettle: 0.5L, 1L, 2L, 5L/50Mpa, 10L, 24L/40Mpa, 50-200L/32Mpa. For both solid and liquid, circulating heating with water jacket, temperature controllable..

Separation kettle: 0.3-10L/30Mpa, 50-100L/16-22Mpa, Equipped with water jacket circulating heating and adjustable temperature.

3. Heat exchange and temperature control system: The digital display double-screen is used to control the remperature of water bath and to measure the temperature of CO2 fluid with the accuracy of temperature control at ±1℃. the heat exchange and temperature control system are equipped for extraction kettle, separation kettle and fine distillation column respectively to control the remperature of water circulation at -85 degree and the temperature of oil circulation at -150 degree.

4. Fine distillation column: According to technical requirements, 4 sections, 6 sections, and 8 sections can be provided for temperature control. Customers can choose corresponding fillings and loads according to technical requirements.

5: High pressure pump: 20L/40Mpa.h double-plunger, 50L/50Mpa.h double-plunger frequency-modulation. 400L/40Mpa.h three-plunger frequency-modulating, the pump head with cooling system.

6. Cooling system: equipped with semi-sealed or full-sealed compressor meet technological requirement.

7: Others: Voltage supply, three-phase four-wire 380V / 50HZ power supply and food grade ≥99.5% CO2 are provided by customer.

II. Main technical parameter of Co2 oil extraction machine: 

III. Detail Pictures of Co2 oil extraction machine: 

The equipment is widely used in the fields of biology, pharmacy, food, health care products, flavors and fragrances, etc.

This equipment is used to extract various essential oils, rose essential oil, peony flower seed oil, ginger oil, grape seed oil, and more CBD oil, your oil yield can reach 99%, and it is pure oil:

This is high pressure pump of Rose Essential Oil Extract

The above picture is show Kettles of the machine of Rose Essential Oil Extract

The above picture is show Control system and the gages of Rose Essential Oil Extract

The above picture is show Detail parts display of Rose Essential Oil Extract

IV. Packing and shipping

1. Export standard wooden boxes are used to pack the machine to protect the machine during transportation.

2. High-quality shipping agency companies in major ports in China, can arrange to send the goods fast, safe with comptitive price

The above picture is show Loading to the container of Rose Essential Oil Extract

V. Our service

Befor-sale services:

We will select the most suitable machine for our customers and provide advanced, energy-saving and practical technical processes. At the same time, we are in charge of machine planning and design.

Sale service:

The product must be rigorously inspected before leaving the factory and customers are required to simulate the testing machine in the field. We will arrange the delivery according to the agreement set forth in the contract.

After-sale service:

We provide professional engineers to guide training in machine installation and operation. We are confident that our customers will be able to use their machines well and bring more and more benefits.

We accept customizable for different customer requires.

1. Our factory is responsible for failures caused by the machine itself and quality reasons. You are responsible for any other obstacles caused by operational errors, human problems, etc.

2. Mchine guarantee is 12 month.

VI. About us

We are a professional machinery supplier in China. We can offer you different solutions depending on your plan to help you make the right decision. Your ideas are our actions. Machine quality is our life, so we focus on every details of machine, so that can provide the best quality machine to every customer.

If you have intersting in our machine and our service, please contact us:

Tel&Wechat&Whatsapp:+86 15638538062

E-mail:lewinnicole@hn-lewin.com