Baoji Hengtong Electronics Co., LTD
| Model NO. | HT15V |
| For | Diffused Silicon Pressure Transmitter |
| Output Signal Type | Analog Type mv sigal |
| Material | Stainless Steel |
| Wiring Type | Four-Wire |
| Measuring Medium | Gas and Liquid |
| Customized | Customized |
| Supply | 5-10VDC |
| wire | 13mm silicone wire |
| Transport Package | Carton |
| Specification | 15mm |
| Trademark | HengTong |
| Origin | China |
| HS Code | 9026209090 |
| Certification | ISO9001 |
| Brand Name | HT SENSOR |
| Model Number | HT15V |
| Place of Origin | Baoji, China |
View Detail Information
Explore similar products
HT20V Diffused Silicon Pressure Sensor 10VDC Piezoresistive Differential
HT24 Flush Silicon Pressure Sensor Hygienic Environmental Liquid Pressure Sensor
Thread TO8 Silicon Pressure Sensor For Dry Air Test Mini Sensor Water Pressure
BP157 Silicon Diaphragm Pressure Sensor Stainless Steel Pressure Transducer 4
Product Specification
| Model NO. | HT15V | For | Diffused Silicon Pressure Transmitter |
| Output Signal Type | Analog Type mv sigal | Material | Stainless Steel |
| Wiring Type | Four-Wire | Measuring Medium | Gas and Liquid |
| Customized | Customized | Supply | 5-10VDC |
| wire | 13mm silicone wire | Transport Package | Carton |
| Specification | 15mm | Trademark | HengTong |
| Origin | China | HS Code | 9026209090 |
| Certification | ISO9001 | Brand Name | HT SENSOR |
| Model Number | HT15V | Place of Origin | Baoji, China |
| High Light | temperature-compensated pressure sensor ，oil-filled isolation film sensor ，15mm level pressure transmitter | ||
| Performance Parameters: | |||||
|---|---|---|---|---|---|
| Measurement Range | Gauge(G) | 350KPa,1000KPa,2000Kpa | |||
| Absolute(A) | 350KPaA,700KPaA,1000KPaA,2000KPaA | ||||
| Sealed(S) | 3500KPaS,7MPaS,10MPaS | ||||
| Typ | Max | Unit | |||
| NonLinearity | ±0.15 | ±0.3 | %F.S | ||
| Repeatability | 0.05 | 0.1 | %F.S | ||
| Hysteresis | 0.05 | 0.1 | %F.S | ||
| Zero Offset Output | 0±1 | 0±2 | mV | ||
| Full Scale Output | 100±1 | 100±2 | mV | ||
| Zero Offset Temp. Drift | ±0.8 | ±2 | %F.S | ||
| Full Scale Temp. Drift | ±0.8 | ±2 | %F.S | ||
| Compensated Temp. | 0~70 | ºC | |||
| Operating Temperature | -20~80 | ºC | |||
| Storage Temperature | -40~125 | ºC | |||
| Allowable Overload | Take the smaller value between 3 times the full scale or 80MPa | ||||
| Burst Pressure | 5X the full scale | ||||
| Long-term Stability | 0.2 % | F.S/Year | |||
| Diaphragm Material | 316L | ||||
| Insulation Resistance | ≥200MΩ 100VDC | ||||
| Vibration | No change under conditions of 10gRMS, 20Hz to 2000Hz | ||||
| Shock | 100g,11ms | ||||
| Response Time | ≤1ms | ||||
| O-ring Seal | Nitrile rubber or Fluoro rubber | ||||
| Filling Medium | Silicon Oil | ||||
| Weight | ~20g | ||||
| The parameters are tested under the following conditions: 10V @25ºC | |||||
| Outline Construction | |
| Dimension | |
| Electrical connection and compensation |
|
| Selection Examples |
| Ordering tips |
1. Ensure proper clearance between the core and transmitter housing during assembly to meet specified airtightness requirements.
2. When assembling the housing, maintain vertical alignment and apply uniform pressure to prevent binding or damage to the compensation plate.
3. If the measured medium is incompatible with the core diaphragm or housing material (316L), please provide specific notes when ordering.
4. Do not press the sensor diaphragm with hands or sharp objects, as deformation or puncture may cause internal damage to the core.
5. Keep the gauge pressure core vented to the atmosphere and prevent moisture, vapor, or corrosive substances from entering the negative pressure chamber.
6. If pin wiring is modified, always refer to the label attached to the actual core for correct connections.
| Q&A |
1. Q: What are the key features of your pressure sensor transmitters?
A: Our transmitters are characterized by high precision, long-term durability, and reliable performance. Customization options are available to meet specific application requirements.
2. Q: Can I request special specifications?
A: Yes, we support both OEM and ODM services. Our engineering team can tailor solutions based on your technical and operational needs.
3. Q: What is your monthly production capacity?
A: We have the capacity to produce up to 30,000 units per month, which enables us to support large-volume orders. To ensure optimal scheduling, we recommend coordinating with our sales team in advance.
4. Q: What is the typical delivery lead time?
A: Standard models are typically delivered within 5–8 working days. Lead times for customized products may vary depending on specifications.
5. Q: What is your pricing structure? Are volume discounts available?
A: We offer competitive pricing with attractive discounts for bulk purchases and long-term partnership agreements.
6. Q: What are your warranty and after-sales support policies?
A: All products come with a 24-month warranty from the date of shipment. Our after-sales team guarantees a response within 24 hours and provides remote assistance via PC-based connectivity when needed.
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
1994
Total Annual:
6000000-7000000
Employee Number:
60~150
Ecer Certification：
Verified Supplier
Baoji Hengtong Electronics Co., Ltd., located in the renowned "The Western Sensor Capital of China" - Baoji city, was established in 1994. As a leading domestic manufacturer of pressure sensors and pressure transmitter, the company has been dedicated to the production of press... Baoji Hengtong Electronics Co., Ltd., located in the renowned "The Western Sensor Capital of China" - Baoji city, was established in 1994. As a leading domestic manufacturer of pressure sensors and pressure transmitter, the company has been dedicated to the production of press...
Get in touch with us
Leave a Message, we will call you back quickly!