Baoji Hengtong Electronics Co., LTD
| Model NO. | HT15V |
| Output Signal Type | Analog Type |
| Material | Stainless Steel |
| Wiring Type | Four-Wire |
| Measuring Medium | Gas and Liquid |
| Customized | Customized |
| Keywords | Mini Sensor |
| Supply | 5-10VDC |
| output | mv sigal |
| Transport Package | Carton |
| Specification | 15mm |
| Origin | China |
| Certification | ISO9001 |
| Brand Name | HT SENSOR |
| Model Number | HT15V |
| Place of Origin | Baoji,China |
View Detail Information
Explore similar products
HT20V Diffused Silicon Pressure Sensor 10VDC Piezoresistive Differential
HT24 Flush Silicon Pressure Sensor Hygienic Environmental Liquid Pressure Sensor
Thread TO8 Silicon Pressure Sensor For Dry Air Test Mini Sensor Water Pressure
BP157 Silicon Diaphragm Pressure Sensor Stainless Steel Pressure Transducer 4
Product Specification
| Model NO. | HT15V | Output Signal Type | Analog Type |
| Material | Stainless Steel | Wiring Type | Four-Wire |
| Measuring Medium | Gas and Liquid | Customized | Customized |
| Keywords | Mini Sensor | Supply | 5-10VDC |
| output | mv sigal | Transport Package | Carton |
| Specification | 15mm | Origin | China |
| Certification | ISO9001 | Brand Name | HT SENSOR |
| Model Number | HT15V | Place of Origin | Baoji,China |
| High Light | 316L stainless steel pressure transducer ，oil-filled compensated pressure sensor ，pressure transmitter sensor with warranty | ||
| Performance Parameters: | |||||
|---|---|---|---|---|---|
| Measurement Range | Gauge(G) | 350KPa,1000KPa,2000Kpa | |||
| Absolute(A) | 350KPaA,700KPaA,1000KPaA,2000KPaA | ||||
| Sealed(S) | 3500KPaS,7MPaS,10MPaS | ||||
| Typ | Max | Unit | |||
| NonLinearity | ±0.15 | ±0.3 | %F.S | ||
| Repeatability | 0.05 | 0.1 | %F.S | ||
| Hysteresis | 0.05 | 0.1 | %F.S | ||
| Zero Offset Output | 0±1 | 0±2 | mV | ||
| Full Scale Output | 100±1 | 100±2 | mV | ||
| Zero Offset Temp. Drift | ±0.8 | ±2 | %F.S | ||
| Full Scale Temp. Drift | ±0.8 | ±2 | %F.S | ||
| Compensated Temp. | 0~70 | ºC | |||
| Operating Temperature | -20~80 | ºC | |||
| Storage Temperature | -40~125 | ºC | |||
| Allowable Overload | Take the smaller value between 3 times the full scale or 80MPa | ||||
| Burst Pressure | 5X the full scale | ||||
| Long-term Stability | 0.2 % | F.S/Year | |||
| Diaphragm Material | 316L | ||||
| Insulation Resistance | ≥200MΩ 100VDC | ||||
| Vibration | No change under conditions of 10gRMS, 20Hz to 2000Hz | ||||
| Shock | 100g,11ms | ||||
| Response Time | ≤1ms | ||||
| O-ring Seal | Nitrile rubber or Fluoro rubber | ||||
| Filling Medium | Silicon Oil | ||||
| Weight | ~20g | ||||
| The parameters are tested under the following conditions: 10V @25ºC | |||||
| Outline Construction | |
| Dimension | |
| Electrical connection and compensation |
|
| Selection Examples |
| Ordering tips |
1. During assembly, ensure proper fit between the core and transmitter housing to meet all sealing specifications.
2. When installing the housing, maintain vertical alignment and apply even pressure to prevent jamming or damage to the compensation plate.
3. If the medium being measured is incompatible with the core diaphragm or housing material (316L), please specify this clearly when placing the order.
4. Do not press on the sensor diaphragm with hands or sharp objects, as deformation or puncture may damage internal components.
5. Keep the pressure port of the gauge core vented to the atmosphere, and prevent moisture, steam, or corrosive media from entering the negative pressure chamber.
6. In case of any changes to pin wiring, always refer to the actual label on the chip for correct connections.
| Q&A |
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
1994
Total Annual:
6000000-7000000
Employee Number:
60~150
Ecer Certification：
Verified Supplier
Baoji Hengtong Electronics Co., Ltd., located in the renowned "The Western Sensor Capital of China" - Baoji city, was established in 1994. As a leading domestic manufacturer of pressure sensors and pressure transmitter, the company has been dedicated to the production of press... Baoji Hengtong Electronics Co., Ltd., located in the renowned "The Western Sensor Capital of China" - Baoji city, was established in 1994. As a leading domestic manufacturer of pressure sensors and pressure transmitter, the company has been dedicated to the production of press...
Get in touch with us
Leave a Message, we will call you back quickly!