Shenzhen Wisdomlong Technology CO.,LTD
| Payment Terms | T/T |
| Supply Ability | 100 |
| Delivery Time | 5-8 work days |
| Packaging Details | New in original box |
| Brand | OMRON |
| Model | R88M-G10030L-BS2 |
| Origion | Japan |
| Brand Name | OMRON |
| Model Number | R88M-G10030L-BS2 |
| Place of Origin | Japan |
| Certification | CE |
View Detail Information
Explore similar products
IN STOCK Mitsubishi Servo Motor HC-RFS103 / HC-RFS153 AC Industrial Motor 1kw
Emerson - Motors-AC Servo MHM-490-CONS-0000 ServoMotors-AC Servo manufactured by
Emerson Control Techniques MHM-8500-CONS-0000 Servo Motors, MH Series Servo
Emerson MH Series Servo Motors-AC Servo manufactured Control Techniques MGE-4120
Product Specification
| Payment Terms | T/T | Supply Ability | 100 |
| Delivery Time | 5-8 work days | Packaging Details | New in original box |
| Brand | OMRON | Model | R88M-G10030L-BS2 |
| Origion | Japan | Brand Name | OMRON |
| Model Number | R88M-G10030L-BS2 | Place of Origin | Japan |
| Certification | CE | ||
| High Light | ac servo motor ，electric servo motor | ||
OMRON R88M-G10030L-BS2 Industrial Servo Motor speed drops below approximately 30 r/min
Operation
Drive Prohibit Input Error (alarm code 38) occurs when Pn004=0 and both Forward Drive Prohibit
and Reverse Drive Prohibit inputs turn OFF.
When Pn004=1, the inputs for both Forward Drive Prohibit and Reverse Drive Prohibit are
disabled.
Drive Prohibit Input Error (alarm code 38) occurs when Pn004=2, and either Forward Drive
Prohibit input or Reverse Drive Prohibit input turns OFF.
After stopping, a command in the direction of the drive prohibit input will cause a command
warning.
1. The Servo ON status will not occur until the Servomotor speed drops below approximately 30 r/min.
*2. The operation of the dynamic brake during Servo OFF depends on the Stop Selection with Servo OFF (Pn069).
*3. The Brake Interlock (BKIR) signal is output on the release request command that comes first, either from the Servo
Controller or the MECHATROLINK-II. The BKIR signal is used by assigning it to the general purpose outputs on
CN1.
In the example above, a release request was not issued from the network.
*4. t1 is either the Brake Timing during Operation (Pn06B) setting or the time for the Servomotor speed to drop below
approximately 30 r/min, whichever occurs first.
Note The Servomotor will not change to Servo ON until it stops even if the Servo ON input is turned ON while it
is decelerating.
Precautions on the holding brake
The brake on a Servomotor with a brake is a nonexcitation brake designed for holding during
stops.
Set the time so that the brake is activated after the Servomotor is stopped.
If the brake is applied while the Servomotor is rotating, the brake disk may be damaged or wear
out, and cause damage to the Servomotor bearings and encoder.
| Specifications | Model | |||
|---|---|---|---|---|
| With oil seal | ||||
| Straight shaft | With key and tap | |||
| Without brake | 200 VAC | 900 W | R88M-1M90010T-O | R88M-1M90010T-OS2 |
| 2 kW | R88M-1M2K010T-O | R88M-1M2K010T-OS2 | ||
| 3 kW | R88M-1M3K010T-O | R88M-1M3K010T-OS2 | ||
| 400 VAC | 900 W | R88M-1M90010C-O | R88M-1M90010C-OS2 | |
| 2 kW | R88M-1M2K010C-O | R88M-1M2K010C-OS2 | ||
| 3 kW | R88M-1M3K010C-O | R88M-1M3K010C-OS2 | ||
| With brake | 200 VAC | 900 W | R88M-1M90010T-BO | R88M-1M90010T-BOS2 |
| 2 kW | R88M-1M2K010T-BO | R88M-1M2K010T-BOS2 | ||
| 3 kW | R88M-1M3K010T-BO | R88M-1M3K010T-BOS2 | ||
| 400 VAC | 900 W | R88M-1M90010C-BO | R88M-1M90010C-BOS2 | |
| 2 kW | R88M-1M2K010C-BO | R88M-1M2K010C-BOS2 | ||
| 3 kW | R88M-1M3K010C-BO | R88M-1M3K010C-BOS2 | ||
| Servomotor rated output | Reduction ratio | Model (Straight shaft) * |
|---|---|---|
| 50 W | 1/21 | R88G-HPG14A21100B[] |
| 1/33 | R88G-HPG14A33050B[] | |
| 1/45 | R88G-HPG14A45050B[] | |
| 100 W | 1/5 | R88G-HPG11B05100B[] |
| 1/11 | R88G-HPG14A11100B[] | |
| 1/21 | R88G-HPG14A21100B[] | |
| 1/33 | R88G-HPG20A33100B[] | |
| 1/45 | R88G-HPG20A45100B[] | |
| 200 W | 1/5 | R88G-HPG14A05200B[] |
| 1/11 | R88G-HPG14A11200B[] | |
| 1/21 | R88G-HPG20A21200B[] | |
| 1/33 | R88G-HPG20A33200B[] | |
| 1/45 | R88G-HPG20A45200B[] | |
| 400 W | 1/5 | R88G-HPG14A05400B[] |
| 1/11 | R88G-HPG20A11400B[] | |
| 1/21 | R88G-HPG20A21400B[] | |
| 1/33 | R88G-HPG32A33400B[] | |
| 1/45 | R88G-HPG32A45400B[] | |
| 750 W (200 V) | 1/5 | R88G-HPG20A05750B[] |
| 1/11 | R88G-HPG20A11750B[] | |
| 1/21 | R88G-HPG32A21750B[] | |
| 1/33 | R88G-HPG32A33750B[] | |
| 1/45 | R88G-HPG32A45750B[] | |
| 750 W (400 V) | 1/5 | R88G-HPG32A052K0B[] |
| 1/11 | R88G-HPG32A112K0B[] | |
| 1/21 | R88G-HPG32A211K5B[] | |
| 1/33 | R88G-HPG32A33600SB[] | |
| 1/45 | R88G-HPG50A451K5B[] | |
| 1 kW | 1/5 | R88G-HPG32A052K0B[] |
| 1/11 | R88G-HPG32A112K0B[] | |
| 1/21 | R88G-HPG32A211K5B[] | |
| 1/33 | R88G-HPG50A332K0B[] | |
| 1/45 | R88G-HPG50A451K5B[] | |
| 1.5 kW | 1/5 | R88G-HPG32A052K0B[] |
| 1/11 | R88G-HPG32A112K0B[] | |
| 1/21 | R88G-HPG32A211K5B[] | |
| 1/33 | R88G-HPG50A332K0B[] | |
| 1/45 | R88G-HPG50A451K5B[] | |
| 2 kW | 1/5 | R88G-HPG32A052K0B[] |
| 1/11 | R88G-HPG32A112K0B[] | |
| 1/21 | R88G-HPG50A212K0B[] | |
| 1/33 | R88G-HPG50A332K0B[] | |
| 3 kW | 1/5 | R88G-HPG32A053K0B[] |
| 1/11 | R88G-HPG50A113K0B[] | |
| 1/21 | R88G-HPG50A213K0B[] |
Our brand:
【Honeywell】 Module DCS/PLC/Transmitter
【Emerson/Delta V】 Module/ CT Motor & Drives
【ABB】 I/O Module
【AB】 Module&Touch Screen
【Rosemount】 Transmitter
【Yokogawa】 Transmitter
【Yaskawa】 Servo Drive&Servo Motor
【GE/Fanuc】 IC69 Series PLC
【Mitsubishi】 Servo Drive&Servo Motor
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)
Company Details
Business Type:
Importer,Exporter,Trading Company,Seller
Year Established:
2010
Total Annual:
1000000-5000000
Employee Number:
100~120
Ecer Certification：
Verified Supplier
Shenzhen Wisdomlong Technology CO.,LTD Mainly engaged in automation parts, PLCS,DCS,sensors, relays, dirves,encoder, servo drive,soft starter,touch screen,instrument,process control,electric transmission and factory automation aspects of the project design,software programming,technical service and ... Shenzhen Wisdomlong Technology CO.,LTD Mainly engaged in automation parts, PLCS,DCS,sensors, relays, dirves,encoder, servo drive,soft starter,touch screen,instrument,process control,electric transmission and factory automation aspects of the project design,software programming,technical service and ...
Get in touch with us
Leave a Message, we will call you back quickly!