Ultrasonic Cleaner for Hardware Parts Hardware Tools with 40khz Frequency

Product Specification

Ultrasonic Cleaner for Hardware Parts Hardware Tools with 40khz Frequency
 

Decorative brass hardware, especially hardware exposed to the elements, can soon lose its luster and eye-catching appeal. Examples include door hardware such as latches, hinges and knockers, lighting fixtures, drawer pulls and cabinetry trim, and fireplace andirons and tools.

Pastes and brass cleaning solvents require an expenditure of time and effort to restore brass hardware to its original sparkling sheen – especially if parts have intricate designs. Mechanically cleaning decorative brass can also damage highly finished surfaces; cleaning solvents may emit unpleasant odors.

Use an Ultrasonic Cleaner for Brass Hardware

Fast, thorough and safe removal of accumulated dirt, tarnish, heat marks and corrosion from brass hardware is achieved simply by immersing parts in an ultrasonic cleaner and let cavitation action do the job while you attend to other matters. Ultrasonic cleaners are available in several sizes making them ideal for use by homeowners and brass collectors, or for operators of professional restoration services.

Prepare parts to be cleaned by disassembling them as much as possible. Prior to cleaning

• Turn on the cleaner and set the thermostat to 60C. As the solution warms
• Carefully position parts in the ultrasonic cleaner basket so they do not contact each other
• Lower the parts into the bath and set the timer for 20 minutes. Place the lid on the cleaner to reduce noise and evaporation. Note that actual cleaning time depends on the condition of the parts. You’ll soon develop your routine.
• At the end of the cycle remove the basket and place it on the inverted lid to drain. Pour drained solution back into the tank.
• Rinse parts in fresh water and allow them to dry.

General introduction of the industrial ultrasonic cleaner:
1st ultrasonic cleaning tank
2nd rinsing tank after rinsing(or add a second rinsing tank for thorough rinsing)
If any special requirements, pls just free to contact. And experienced engineer will design the machine for you.

Packing:

1 x ultrasonic cleaner

1 x SUS basket

1 x SUS lid

1 x power cord

1 x English instruction manual
 
The Advantages of AG Engine block ultrasonic cleaning machine
Ultrasonic cleaning machine delivers high performance industrial strength, cleaning action on Engine block, carburetor and Engine parts
01: Cleans carbon deposits from carburetors and all manner of engine parts
02: Removes stubborn oil grease, lubricants, paint, rust, and dirty (with-pre-cleaning in same cases
03: Aluminum sate
04: Penetrates deep into the part and cleans holes, small apertures and crevices
05: Clean sensitive parts like wiring and plastic without damage
06: Does not require line-of-sight for effective cleaning
07: Ensures part longevity due to high degree of cleanliness
AG Engine block ultrasonic cleaning machine are revolutionizing cleaning methods and processes on the automotive and mechanic shop floor, our Engine block ultrasonic cleaning machine can clean all kinds of automotive, aircraft, and marine engine parts, ultrasonic technology for cleaning parts eliminates manual labor while providing you with superior cleaning action, most parts can be cleaned with environmentally friendly water-based solutions.

Specifications:

 
Aplication of tanks ultrasound cleaner machine applications: