Supply Ability | 3000kg month |
Delivery Time | 7~14 days |
Packaging Details | A component 400g/set,B component 100/set. |
A appearance | Gray paste |
Basic chemicals | Amine curing agent |
B appearance | Grey Black Paste |
Density(g/cm3) | 1.90~2.30 |
Mixed weight ratio | A:B=4:1 |
pot life | 60 |
Room temperature cure time shortest before operation (h) | 100% Load 24 |
Brand Name | Huitian |
Model Number | 2218 |
Certification | ISO |
Place of Origin | China |
View Detail Information
Explore similar products
Fast Curing Acrylic AB Glue for metal , plastic , wood and ceramic adhesive glue
7580 Hot melt reactive polyurethane potting compound adhesive for Mobile phone
Middle Strength Thixotropic Anaerobic Thread Locker Blue 7242 for locking and
High bonding strength five minute epoxy glue for tire repair , epoxy glue for
Product Specification
Supply Ability | 3000kg month | Delivery Time | 7~14 days |
Packaging Details | A component 400g/set,B component 100/set. | A appearance | Gray paste |
Basic chemicals | Amine curing agent | B appearance | Grey Black Paste |
Density(g/cm3) | 1.90~2.30 | Mixed weight ratio | A:B=4:1 |
pot life | 60 | Room temperature cure time shortest before operation (h) | 100% Load 24 |
Brand Name | Huitian | Model Number | 2218 |
Certification | ISO | Place of Origin | China |
High Light | AB Adhesive ,five minute epoxy glue |
2218 Wear-resistant Repairing Agent Is a two-component epoxy adhesive to metal titanium compound and hard ceramic aggregate wear-resistant composite materials.
Performance Feature
Black paste, room temperature curing, high bonding strength with matrix; After repair coating wear resistance is medium carbon steel surface quenching 2 ~ 8 times.
Typical Applications
Used for coarse grinding grain is less than 25 mm in diameter of abrasive wear parts repair, protective coating can be done. Apply to repair or preliminary protection propeller pump, slurry mixer, such as slag transporting pipe bending, etc.
Characteristics Before Solidification
typical value range
A component
appearance Gray paste
Basic chemicals Epoxy
B component
appearance Grey Black Paste
Basic chemicals Amine curing agent
Mixed characteristic
typical value
Appearance Gray paste
Density(g/cm3)(GB/T13354-1992)2.15 1.90~2.30
Mixed weight ratio: A:B=4:1
pot life(min) 60
(100g@25℃)
Room temperature cure time shortest before operation (h)
50% Load 12
100% Load 24
Cured Characteristics
typical value
hardness (Shore D)(GB/T2411-1980) 85
shear strength (MPa)(GB/T7124-1986) 10
Operating temperature (℃) -60-150
Instructions
1. Cleaning and preparation: polished surface of unattended, bared metal body and make it rough. Clear oil, it is recommended to use detergent 7755 cleaning, have seen better.
2. Glue: according to the dosage, by weight than 4:1 says in part A and part B, mixing evenly, make it A uniform color.
3. Paint Glue: the glue on the mend, compaction force, eliminate sub in the cracks, porosity, shape, smooth.
4. Cure:At 1 day can be cured, if you want to faster curing, can be appropriately heating, curing in 80 ℃ for 2 ~ 3 hours.
5. The reaction is exothermic reaction, with glue should be paid attention to.
1) The more amount of glue, the faster the curing reaction.
2) The higher the temperature, the faster the curing reaction.
3) To achieve the best performance, must be in strict accordance with the provisions of proportion.
4) Environmental temperature under 10 ℃ when, can preheat the repaired surface.
5) Completely curing rear can achieve the best physical and mechanical properties.
6. Shorten curing time method:
1) Improve the environmental temperature.
2) Improve the unattended workpiece temperature.
3) Coating after repairing adhesive with infrared lamp, halogen lamp, such as the heat source heating, but the outside heat source should be 400 mm from repair layer (ambient temperature is not higher than 100 ℃), not directly with flame heating.
Notes
1.Not finished part A and B respectively sealed preservation, so that next time, each in A and B components that not use up seal save, in order to use next time.
2.Contaminated adhesive solution can no longer be in the original tins, lest affect the jar residual adhesive solution performance.
3.Keep away from Children.
4.Can irritate the eye skin, should be used in a well ventilated place.
5.If touch with eyes and skin, immediately after wiping, rinse with water.
The safety of the product information, please refer to the product MSDS.
Specification
No: 221806,500g/set ,1 set/box,16 set/carton
Detials:A component 400g/set,
B component 100/set.
No: 221807,10kg/set ,1set/carton
Details:A component 8kg/set,
B component 2kg/set.
Storage condition
In 8-28 ℃ a cool and dry place for storage.
Storage period of 2 years.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1977
Total Annual:
580,000,000-620,000,000
Employee Number:
1600~1800
Ecer Certification:
Verified Supplier
Introduction Huitian New Material is a high-tech enterprise group specializing in the research, development, and production of adhesives and new materials, with stock code 300041. It has industrial bases and R&D centers in Shanghai, Guangdong, Jiangxi, and Hubei. T... Introduction Huitian New Material is a high-tech enterprise group specializing in the research, development, and production of adhesives and new materials, with stock code 300041. It has industrial bases and R&D centers in Shanghai, Guangdong, Jiangxi, and Hubei. T...
Get in touch with us
Leave a Message, we will call you back quickly!