Outdoor Rolling Commercial Inflatable Water Toy , Rolling Balls 2.8m Long * 2.4m

Product Specification

Outdoor Rolling Commercial Inflatable Water Toy , Rolling Balls 2.8m Long * 2.4m Dia

Specifications:

Description:

1.Material: This Items we use 0.8/1.0mm PVC material, you also can choose TPU. For this Itmes, We have two kinds of material, PVC or TPU, TPU is much expensive than PVC. Compare to PVC , TUP Material is with advantage features as: Friendly environment, more elasticity and low-temperature-resistant. If you need, we can use TPU material as you want.

2. High precision stitching machine and cultivated stitching workmanship
All of our water rollers are stitched by high precision stitching machine. most importantly, we always apply double stitching anywhere in the inflatables and quadruple stitching in positions sustaining much force and pressure from jumping.

3.Water roller is a giant 2.8m long plastic cylinder, with which you can rock-and-cross the river safely. The inset cups on the outer surface help grip and paddle your way through the water as you spin the cylinder. With a internal chamber, you can engage in Nuclear Face-Off as you and your friend compete to bump and bounce each other into submission.

4.Water rolloer is a double-sectioned sphere, with one roller inside and the other with an air layer between. Usually used on pool or river. Water Roller are lightweight and made of flexible PVC or TPU. A typical Water rolloer size is about 2.8M X 2.4M for Adult and 2.4m x 2.2m for Kids. The inner and outer water roller are connected by numerous (often hundreds) small ropes. Water roller have one or two tunnel-like entrances.Entrances Diameter is about 65cm.

4.Feature:Waterproof, anti-tearing , Fir-resistent , strong and durable.
5.Payment terms:50% deposit before producing, and 50% balance before delivery.
6.MOQ:1 PC

Advantages:

1. Reliable and durable Material
Top quality material are always applied on our inflatables, and all of them are from one of the best material suppliers in China - Plato chemical; All of the materials we are applying meet ROHS , EN14960 , CE , UL.

2.Not only do we focus on our products quality themselves, but also we pay attention to other details like packing. Based on our years experience, we always provide our customers the best packing like: Use heavy-duty 0.65mm PVC Tarpaulin carry bag to pack Inflatables and Exported standard cartons for Air pump and repair kit.

3.we have stricly quality control procedure and good after-service, the details are as follows:
a.We test each product for 3 days to ensure the toys seamed exactly well.
b.We provide repair kit for free,which including material and glue for repairing in case.
c.We will guide you to repair the roller and make compensation for them accordingly.
d.7 x 24 hours online service , any questions will be promot response.

3. Our harness inside the roller is very flexible and you can adjust it to proper position quickly.
4. Imported miller welding machine which has stable welding temperature, so our products will not be overwelded or misswelded to ensure the products stable and durable.

Repair Guidance:

1. Find out exactly where the leak is. Fill a spray bottle with a mixture of soap and water and spray it liberally on the water roller along the seams. You will notice that the solution starts to bubble up where the leak is located, so take note of the position of the hole.
2. Prepare the hole for patching. Dry the seam off, and make sure that it is completely deflated before attempting to patch the seam. If you have the patch kit that came with the roller, you can use the prep solution to thoroughly clean the rubber before proceeding. Rubbing alcohol also works.
3. Apply glue to the seam and let it dry for about 15minutes. If possible, apply some glue to the inside of the seam as well, so that it spreads out and gives an extra layer of protection when the water roller pressurizes.
4. Fill the water roller about halfway with air and wait another 30 minutes or so to make sure that the glue has dried completely.
5. Inflate the item completely and spray it again with the soap and water mixture to make sure that the hole is indeed fixed.