WUHAN GLOBAL SENSOR TECHNOLOGY CO., LTD.
| Payment Terms | L/C, T/T |
| Function | Gas Leak Detection |
| Cryo Cooler | RS058 |
| Detector Resolution | 320x256 |
| Pixel Size | 30μm |
| NETD | ≤15mK |
| Spectral Range | 3.2±0.1~3.5±0.1μm |
| Brand Name | GST |
| Model Number | GAS330 |
| Certification | ISO9001:2015; RoHS; Reach |
| Place of Origin | Wuhan, Hubei Province, China |
View Detail Information
Explore similar products
320x256 30μm Cooled IR Camera Module for Optical Gas Imaging
320x256 30μm Cooled Infrared Camera Module for Non contact Gas Leakage Detection
320x256 30μm MWIR Cooled Optical Gas Imaging Camera for Visualizing Gas Leaks
GST Gas Leakage Camera Core With 320x256 / 30μm Infrared Detector
Product Specification
| Payment Terms | L/C, T/T | Function | Gas Leak Detection |
| Cryo Cooler | RS058 | Detector Resolution | 320x256 |
| Pixel Size | 30μm | NETD | ≤15mK |
| Spectral Range | 3.2±0.1~3.5±0.1μm | Brand Name | GST |
| Model Number | GAS330 | Certification | ISO9001:2015; RoHS; Reach |
| Place of Origin | Wuhan, Hubei Province, China | ||
| High Light | OGI Optical Gas Imaging Camera ，30Hz Optical Gas Imaging Camera ，15mK Optical Gas Imaging Camera | ||
320x256 / 30μm MWIR Cooled Optical Gas Imaging Camera for Visualizing Gas Leaks
Optical Gas Imaging (OGI) is an innovative thermal imaging technology that utilizes high sensitivity infrared cameras for detecting minute fugitive emissions of industrial gases.
GAS330 Cooled Optical Gas Imaging Camera can detect gas leaks that are hazardous for human health and the environment by visualizing them. This thermal camera module has a cooled infrared detector, a resolution of 320x256, a piexl size at 30µm and a spectral range of 3.2~3.5μm.
By using GAS330 thermal camera module, non-contact detection is achieved so that the safety of inspectors can be ensured, improving the quality and efficiency with cost saving.
- Resolution: 320x256
- Pixel Pitch: 30µm
- NETD≤15mK, High Sensitivity
- Spectral Response: 3.2µm±0.1µm~3.5µm±0.1µm
- Wavelength Customizable Based on Different Requirements
- Integrate with DVP/CameraLink Interface Easily
| Model | GAS330 |
| IR Detector Performance | |
| Resolution | 320x256 |
| Pixel Pitch | 30μm |
| Cryocooler | RS058 |
| Spectral Range | 3.2μm±0.1μm~3.5μm±0.1μm MW |
| Cooling Time (20°C) | ≤8min |
| NETD (20°C) | ≤15mK |
| Image Processing | |
| Frame Rate | 30Hz |
| Dimming Mode | Linear/Histogram/Mixed |
| Digital Zoom | ×1/×2/×4 |
| Image Direction | Horizontally/Vertically/Diagonally Flip |
| Image Algorithm | NUC/AGC/IDE |
| Electrical Specification | |
| Standard External Interface | J30JZ 25pin |
| Analog Video | PAL |
| Digital Video | 16bit RAW/YUV: 16bit DVP/Cameralink Output |
| External Sync | Frame External Sync: RS422 Level |
| Communication | RS422, 115200bps |
| Power Supply | 20~28VDC |
| Stable Power Consumption | 12W |
| Dimension (mm) | 155×67×80 |
| Weight | ≤900g |
| Operation Temperature | -40°C ~ +60°C |
| Vibration Magnitude | Vibration: GJB Vehicle-mounted High Speed Transport Shock: Half-sine Wave, 40g 11 ms, 3 Axis 6 Direction 3 Times Each |
| Optical Lens | |
| Optional Lens | Fixed Zoom: 23mm/F1.5; 55mm/F1.5 |
The GAS330 gas leak detection thermal imaging camera is used for visiualizing the invisible VOCs (volatile organic compounds) and detecting gas leakage such as: Methane, Ethane, Propane, Butane, Pentane, Hexane, Heptane, Octane, Ethylene, Propylene, Isoprene, Methanol, Ethanol, Butanone, Benzene, Toluene, Xylene, Ethylbenzene etc.
1.What is the difference between low light, active IR and thermal imaging?
Low light needs natural light and transforms weak natural light image into enhanced electronic image through image intensifier;
Active IR actively emits infrared light and uses infrared beam reflected by the target. It has very poor concealment;
Thermal imaging doesn’t need any light and is a passive infrared night vision that detects infrared radiation difference between targets and scene or different parts of an object. not be affected by the changes of the surrounding lighting conditions, during night or even in fog, rain and other harsh environments.
2. Can you block thermal imaging?
In most cases, you cannot. But infrared rays can't penetrate walls, and also the glass can block IR. So, if you don’t want to be detected, you can conceal behind glass or walls to block the thermal imaging.
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2013
Employee Number:
500~800
Ecer Certification：
Verified Supplier
COMPANY INTRODUCTION Global Sensor Technology is the world leading infrared detector manufacturer and service provider with more than 10 years of industrial experience. It is willing to provide customers all over the world with high performance cooled uncooled thermal imaging detectors,... COMPANY INTRODUCTION Global Sensor Technology is the world leading infrared detector manufacturer and service provider with more than 10 years of industrial experience. It is willing to provide customers all over the world with high performance cooled uncooled thermal imaging detectors,...
Get in touch with us
Leave a Message, we will call you back quickly!