Multicore Low Voltage Underground Cable Low Voltage Control Cable ISO Standard

Product Specification

Multicore Low Voltage Underground Cable Low Voltage Control Cable ISO Standard

Technical data

Power and control cable acc. to DIN VDE 0276 part 604,

HD 604 S1 part 1 and part 5G

Temperature range

during installation -5°C to +50°C fixed installation -30°C to +90°C

Permissible operating temperature

at conductor +90°C

Nominal voltage U0/U 0,6/1 kV

Test voltage 4 kV

Minimum bending radius

single-core 15x cable Ø multi-core 12x cable Ø

Radiation resistance

up to 100x106 cJ/kg (up to 100 Mrad)

Caloric load values

see Technical Informations

Cable structure

Bare copper-conductor, to

DIN VDE 0295 cl.1 or cl.2, single-wire or multi-wire, BS 6360 cl.1 or cl.2, IEC 60228 cl.1 or cl.2

Core insulation of cross-linked polyethylene (XLPE)

compound type 2XI1 to HD 604 S1

Core identification to DIN VDE 0293-308

Core identification for 3+½ conductor J-type: GN-YE (½), BN, BK, GY

O-type: BU (½), BN, BK, GY

Cores stranded in layers (for multi-core cables)

Overall filled inner sheath

Covered by filling compound or taping

Outer sheath of thermoplastic polyolefine, compound type HM4 to HD 604 S1

Sheath colour black

Properties

Halogen-free, no separation of corrosive or toxic gases

Limited propagation of fire

Low smoke development

The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers tests

Flame test acc. to DIN VDE 0482-332-3-24, BS 4066 part 3, DIN EN 60332-3-24,

IEC 60332-3-24 (previously DIN VDE 0472

part 804 test method C)

Corrosiveness of combustion gases

acc. to DIN VDE 0482 part 267,

DIN EN 50267-2-2, IEC 60754-2

(equivalent DIN VDE 0472 part 813)

Halogen-free acc. to DIN VDE 0482

part 267, DIN EN 50267-2-1, IEC 60754-1

(equivalent DIN VDE 0472 part 815)

Smoke density acc. to DIN VDE 0482 part 1034-1+2, DIN EN 61034-1+2,

IEC 61034-1+2, BS 7622 part 1+2

(previously DIN VDE 0472 part 816)

Note

re = round conductor, single-wire rm = round conductor, multi-wire sm = sectional conductor, mutli-wire

J-version = with GN-YE conductor

O-version = without GN-YE conductor

AWG sizes are approximate equivalent values. The actual cross-section is in mm².

LS0H = Low Smoke Zero Halogen

Application

Halogen-free power cables with enhanced characteristics in case of fire are used for applications where harm to human life and damage to property must be prevented in the event of fire, e. g. in power stations, industrial installations, communal establishments, hotels, airports, underground stations, railway stations, hospitals department stores, banks, schools theaters, multi-storey buildings, process control centres etc. Suitable for fixed installation

in dry, damp or wet environments, in, above, on and beneath plaster as well as in masonary walls and in concrete. These cables are suitable for outdoor Q applications and in underground by using in conduits or tubes. For the installation in conduit all precautions must be taken that no accumulation of water can occur in the pipes.

applications and in underground by using in conduits or tubes. For the installation in conduit all precautions must be taken that no accumulation of water can occur in the pipes.

= The product is conformed with the EC Low-Voltage Directive 2006/95/EC.