Guangzhou Shice Equipment Co., Ltd.
| Payment Terms | T/T, Western Union, MoneyGram |
| Supply Ability | 999 units per month |
| Delivery Time | in 15 work days |
| Packaging Details | Plastic Tool Box |
| Standards | IEC60061-3 |
| Warranty | 12 months |
| Material | Mold steel |
| 7006-73-1 | Gauge for bi-pin cap G5.3 on finished lamps |
| Purpose | To check the cap G5.3 shown on sheet 7004-73 |
| Type | Lamp cap gauge |
| Brand Name | SHC |
| Model Number | SC-G5.3 |
| Certification | CNAS、TUV、ITS、CSA、BV、SGS (cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Check Caps GX53 7006-142-1 CNAS Lamp Cap Gauge
E26 Go And Not Go Gauges , Mold steel Screw Thread Gauge
Bi Pin Lamp Bases G4 Mold steel Go And Not Go Gauges
E14 7006-25-7 Lamp Cap Gauge , Screw Lamp Holder Gauges
Product Specification
| Payment Terms | T/T, Western Union, MoneyGram | Supply Ability | 999 units per month |
| Delivery Time | in 15 work days | Packaging Details | Plastic Tool Box |
| Standards | IEC60061-3 | Warranty | 12 months |
| Material | Mold steel | 7006-73-1 | Gauge for bi-pin cap G5.3 on finished lamps |
| Purpose | To check the cap G5.3 shown on sheet 7004-73 | Type | Lamp cap gauge |
| Brand Name | SHC | Model Number | SC-G5.3 |
| Certification | CNAS、TUV、ITS、CSA、BV、SGS (cost additional) | Place of Origin | China |
| High Light | IEC60061-3 Lamp Cap Gauge ，CSA Lamp Cap Gauge ，SGS Bi-pin cap gauge | ||
Gauge for bi-pin cap G5.3 on finished lamps 7006-73-1
7006-73-1
Gauge for bi-pin cap G5.3 on finished lamps 7006-73-1
Purpose:
To check the cap G5.3 shown on sheet 7004-73 in the following respects:
-the combined displacement and diameter of the pins (dimensions D and E) with respect to the
maximum horizontal section (dimensions A max. and B max.) of the cap;
-the minimum height of the shell (dimension C min.);
-the diameter of the individual pins (dimension E);
-the length of the pins (dimension F).
Testing:
-It shall be possible to insert the cap into the gauge with the pins entering at surface Z until
the supporting feet of the shell are in contact with surface Z.
In this position, the ends of the pins shall be co-planar with or project beyond surface X but shall
not project beyond surface W.
In additon, the top edge of the shell shall be co-planar with or project beyond surface Y.
-In carrying out this check the force used shall not exceed 5N.
-It shall be possible to insert the individual pins of the cap into the hole e2 until the level of the
supporting feet is coincident with surface W.
-It shall not be possible to insert the individual pins into hole e1.
Conforms To:
IEC60061-3 G5.3 7006-73-1
Application:
Guangzhou Shice Equipment offers a wide range of gauge to meet the most common standards
including those from IEC, EN, UL, GB,DIN,VDE and others. Such standards require the
checking of size & definition etc. these gauges are constructed from senior stainless steel
and appropriate steel with a hardness of at least 60 HRC and a roughness according to
standard require. Each gauge is supplied with a certificate of calibration.
Company Details
Business Type:
Manufacturer
Year Established:
2016
Total Annual:
1000000-3000000
Employee Number:
>100
Ecer Certification：
Active Member
Guangzhou Shice Equipment Co., Ltd. (hereinafter referred to as Guangzhou Shice) is the one professional focus on IEC testing equipments, IP waterproof testing equipments, electronic testing products and other testing products. Guangzhou Shice is professionally dedicated in providing laboratory test... Guangzhou Shice Equipment Co., Ltd. (hereinafter referred to as Guangzhou Shice) is the one professional focus on IEC testing equipments, IP waterproof testing equipments, electronic testing products and other testing products. Guangzhou Shice is professionally dedicated in providing laboratory test...
Get in touch with us
Leave a Message, we will call you back quickly!