Shenzhen Jupin Technology Co., Ltd.
| MIPI-DSI | 31-pin FPC MIPI-DSI connector supporting up to 1920x1200 output. Note: MIPI and LVDS outputs cannot be used simultaneously; the motherboard defaults to a single output format, and switching requires changing resistor solder joints. |
| MIC Input | Single-end MIC input (pin header) |
| Fan Port | 12V fan power supply port |
| GPIO Signals | 5 x GPIO signal pins for expanding GPIO keys and/or 3.3V I/O. |
| Android Version | Recommended Android 8.1 |
| Payment Terms | T/T |
| Supply Ability | 200+/day |
| Packaging Details | |
| DDR | LPDDR-III 1GB (2GB optional) |
| Micro SD Card | Push-push TF card socket, supporting TF cards up to 128GB |
| Infrared RC | Standard infrared remote control receiver and infrared receiver pin header |
| Size | Length*Width*Height (120mm*80mm*9mm), PCB top side height 7mm |
| Line Output | Support standard left and right channel line output (pin header) |
| Serial Ports | 1 TTL/RS-485 compatible, 1 TTL/RS-232 compatible |
| Light Sensor | Analog and digital input ambience light sensor port |
| DC Input | Supports 9~15V wide voltage DC power input |
| MIPI-CSI | One 30-Pin FPC MIPI-CSI camera port |
| Door Control | 1 x DPDT access control relay interface |
| Amplifier Output | 8 Ohm 10W Dual Audio Amplifier Output |
| Wiegand Interface | Standard two-line Wiegand input port |
| Buttons | Recovery (flash) button and power/reset pin header interface |
| Fill Light | 1 x 12V fill-light interface with PWM support |
| I2C Bus | I2C pin header and FPC for I2C capacitive screen and etc. |
| WiFi | Built-in high performance SDIO interface WiFi module, support IEEE 802.11 b/g/n |
| LED Indicator | Three-color LED indicator for standby, network and running |
| Delivery Time | 5-8 work days |
| CPU | PX30 Cortex-A35 quad-core, up to 1.5GHz |
| Camera | Supports USB cameras up to 2MP and 1 x MIPI camera interface |
| USB 2.0 Interface | 1 x external horizontal USB port (compatible with USB Device/Host modes), 5 x internal pin-header USB ports (3 independent, 2 multiplexed/shared) |
| MiniPCI-E 4G | Industry standard MiniPCI-E 4G module interface with Nano-SIM card socket |
| Backlight Control | Industry standard LCD backlight control header, support for backlight switch and brightness adjustment |
| Storage | The default comes with an 16GB EMMC NAND chip that can scale up to 128GB |
| Real Time Clock | Ultra-low power RTC circuit (with CR1220 coin cell battery), supports scheduled power-on/off |
| LVDS | 40-pin FPC connector supporting VESA/JEITA formats, with a maximum single-channel output of 1366x768. Note: LVDS and MIPI outputs cannot be used simultaneously; the motherboard defaults to a single output format, and switching requires changing resistor so |
| Bluetooth | Built-in high performance serial interface BT module (optional) with support for V2.1+EDR/BT v3.0/BT v3.0+HS/BT v4.0 |
| Ethernet | 10/100M Adaptive Ethernet RJ45 connector |
| Ambient Requirement | Working temperature 0°~70°, working humidity 0%~95% (non-condensing) |
| Brand Name | |
| Model Number | F1 Mainboard |
| Place of Origin | China |
View Detail Information
Explore similar products
P3X Smart POS Terminal Mainboard with Primary LVDS, Secondary LVDS, Primary EDP,
H-A133L Smart HMI Motherboard Up to 5 USB Ports 9~15V wide voltage DC power
H-3568 Smart HMI Motherboard Mali-G52 2EE Support 1Tops computing power
H-3566 Smart HMI Mainboard RK3566,quad-core Cortex-A55,Clock up to 1.8GHz
Product Specification
| MIPI-DSI | 31-pin FPC MIPI-DSI connector supporting up to 1920x1200 output. Note: MIPI and LVDS outputs cannot be used simultaneously; the motherboard defaults to a single output format, and switching requires changing resistor solder joints. | MIC Input | Single-end MIC input (pin header) |
| Fan Port | 12V fan power supply port | GPIO Signals | 5 x GPIO signal pins for expanding GPIO keys and/or 3.3V I/O. |
| Android Version | Recommended Android 8.1 | Payment Terms | T/T |
| Supply Ability | 200+/day | Packaging Details | |
| DDR | LPDDR-III 1GB (2GB optional) | Micro SD Card | Push-push TF card socket, supporting TF cards up to 128GB |
| Infrared RC | Standard infrared remote control receiver and infrared receiver pin header | Size | Length*Width*Height (120mm*80mm*9mm), PCB top side height 7mm |
| Line Output | Support standard left and right channel line output (pin header) | Serial Ports | 1 TTL/RS-485 compatible, 1 TTL/RS-232 compatible |
| Light Sensor | Analog and digital input ambience light sensor port | DC Input | Supports 9~15V wide voltage DC power input |
| MIPI-CSI | One 30-Pin FPC MIPI-CSI camera port | Door Control | 1 x DPDT access control relay interface |
| Amplifier Output | 8 Ohm 10W Dual Audio Amplifier Output | Wiegand Interface | Standard two-line Wiegand input port |
| Buttons | Recovery (flash) button and power/reset pin header interface | Fill Light | 1 x 12V fill-light interface with PWM support |
| I2C Bus | I2C pin header and FPC for I2C capacitive screen and etc. | WiFi | Built-in high performance SDIO interface WiFi module, support IEEE 802.11 b/g/n |
| LED Indicator | Three-color LED indicator for standby, network and running | Delivery Time | 5-8 work days |
| CPU | PX30 Cortex-A35 quad-core, up to 1.5GHz | Camera | Supports USB cameras up to 2MP and 1 x MIPI camera interface |
| USB 2.0 Interface | 1 x external horizontal USB port (compatible with USB Device/Host modes), 5 x internal pin-header USB ports (3 independent, 2 multiplexed/shared) | MiniPCI-E 4G | Industry standard MiniPCI-E 4G module interface with Nano-SIM card socket |
| Backlight Control | Industry standard LCD backlight control header, support for backlight switch and brightness adjustment | Storage | The default comes with an 16GB EMMC NAND chip that can scale up to 128GB |
| Real Time Clock | Ultra-low power RTC circuit (with CR1220 coin cell battery), supports scheduled power-on/off | LVDS | 40-pin FPC connector supporting VESA/JEITA formats, with a maximum single-channel output of 1366x768. Note: LVDS and MIPI outputs cannot be used simultaneously; the motherboard defaults to a single output format, and switching requires changing resistor so |
| Bluetooth | Built-in high performance serial interface BT module (optional) with support for V2.1+EDR/BT v3.0/BT v3.0+HS/BT v4.0 | Ethernet | 10/100M Adaptive Ethernet RJ45 connector |
| Ambient Requirement | Working temperature 0°~70°, working humidity 0%~95% (non-condensing) | Brand Name | |
| Model Number | F1 Mainboard | Place of Origin | China |
| High Light | MIPI Android Motherboard ，4G Android Motherboard ，12V Android Motherboard | ||
F1 Smart Face Recognition Access Control Motherboard
Built specifically for face recognition access control and time attendance terminals, the F1 Smart Face Recognition Access Control Motherboard combines reliable performance with specialized interfaces for biometric authentication applications. Powered by the Rockchip PX30 quad-core Cortex-A35 processor running at 1.5GHz, the board supports 1080P hardware video decoding — essential for smooth camera capture and display. The F1 stands out with its integrated access control peripherals: Wiegand input for card reader connectivity, DPDT relay for direct door lock actuation, and a 12V fill-light interface with PWM dimming for optimal face capture in low-light conditions. The MIPI-CSI camera port delivers higher image quality and lower latency than USB alternatives — critical for accurate face matching. Dual 8Ω 10W amplifiers provide loud, clear audio feedback for user prompts and alarm notifications, while the ambient light sensor enables automatic display brightness adjustment. With 9V–15V wide voltage input, MiniPCI-E for 4G expansion, and Android 8.1 support with open API SDK, the F1 offers a complete, cost-effective solution for OEMs building next-generation access control systems.
Specialized Access Control Interfaces: Wiegand input for card readers, DPDT relay for door locks, and 12V PWM-controlled fill-light — all integrated on-board, eliminating the need for external adapter modules.
MIPI-CSI Camera Interface: Dedicated MIPI camera port delivers superior image quality and lower latency compared to USB cameras — essential for accurate face recognition and liveness detection.
10W Audio Amplifier: Dual 8Ω 10W outputs drive speakers directly for loud, clear voice prompts — ensuring users hear confirmation feedback even in high-noise environments like factories or outdoor entrances.
Display Configuration Flexibility: Supports both LVDS (up to 1366×768) and MIPI-DSI (up to 1920×1200) — choose the display that fits your design. Hardware-configurable via resistor settings.
Environment-Adaptive Design: Ambient light sensor adjusts screen brightness automatically, while the PWM-controlled fill-light ensures consistent camera illumination — delivering reliable face recognition in any lighting condition, from direct sunlight to complete darkness.
Compact, Security-Focused Form Factor: 120mm × 80mm × 9mm footprint with all access control interfaces on a single board — reduces enclosure size and simplifies integration into door-mounted terminals.
Access Control-Focused Architecture: Unlike repurposed general-purpose boards, the F1's interface selection is tailored for face recognition terminals — Wiegand, door relay, fill-light control, and MIPI-CSI are all standard, not afterthoughts.
PWM Fill-Light for Reliable Night Capture: The 12V fill-light interface with PWM dimming ensures consistent illumination for face capture in low-light environments. No external lighting controller needed — software-controllable brightness for optimal image quality day or night.
Optimized for Cost-Sensitive Volume Deployment: The PX30 platform offers the ideal balance of performance and cost for access control applications. Powerful enough for reliable face recognition, yet cost-effective for large-scale deployments in office buildings, residential complexes, and campus environments.
MIPI-CSI Over USB: MIPI-CSI provides direct camera connection with lower latency and better image quality than USB — critical for face recognition where every millisecond and pixel matters. No USB controller overhead, no driver compatibility issues.
All-in-One Door Control: With DPDT relay + Wiegand input + fill-light control + audio amplification + light sensor on a single board, the F1 reduces BOM complexity, simplifies integration, and accelerates time-to-market for access control OEMs.
| Item | Details |
|---|---|
| Packaging | Anti-static bag + foam padding + industrial carton |
| MOQ | 1 piece (sample order), 100+ for volume pricing |
| Lead Time | 3–5 working days for samples; 15–20 working days for bulk orders |
| Shipping | DHL, FedEx, UPS, or by sea (customer's choice) |
Company Details
Business Type:
Manufacturer
Year Established:
2016
Total Annual:
1000000-1500000
Employee Number:
>100
Ecer Certification：
Site Member
Shenzhen Jupin Technology Co., Ltd. ("Jupin" for short) is a domestic high-tech enterprise focusing on the development, production and sales of iris recognition and face recognition technology products. Main products: iris recognition access control, iris recognition attendance machine, fa... Shenzhen Jupin Technology Co., Ltd. ("Jupin" for short) is a domestic high-tech enterprise focusing on the development, production and sales of iris recognition and face recognition technology products. Main products: iris recognition access control, iris recognition attendance machine, fa...
Get in touch with us
Leave a Message, we will call you back quickly!