Shenzhen Jupin Technology Co., Ltd.
| HDMI Output | 2 x HDMI 2.1 standard display interfaces (one shared with eDP), supporting up to 8K output. |
| Line Input | Support standard left and right channel line input (pin header) |
| EDP | 20-pin industry-standard EDP supporting 1~4 lanes format up to 4K@60Hz output |
| Amplifier Output | 8 Ohm 6W Dual Audio Amplifier Output |
| Line Output | Support standard left and right channel line output (pin header + headphone jack) |
| Android Version | Android 12.0 recommended, with optional Linux Buildroot / Debian 11 / Ubuntu 20.04 (to be released). |
| DDR | LPDDR4 2GB (4GB|8GB|16GB|32GB optional) |
| MIPI Camera | Supports up to 16MP 4-Lane MIPI CSI camera |
| Infrared RC | Standard infrared receiver pin header |
| DC Input | Supports 9~15V wide voltage DC power input |
| MIPI-DSI | 31-Pin FPC MIPI-DSI display port supporting up to 1920x1200 |
| HD/MIC | One 3.5mm 4-pole audio jack supporting headset (headphone + microphone) combo, compliant with US-standard CTIA pin assignment: Left, Right, Ground, Microphone (L-R-GND-MIC). |
| Micro SD Card | Self-eject TF card socket, supporting TF cards up to 128GB (TF card shared with CAN0) |
| GPIO Signals | Up to 8 x GPIO signals (2x shared with TP, 4x shared with TF card), configurable for GPIO key expansion and/or 3.3V I/O. |
| Ambient Requirement | Working temperature -20°~70°, working humidity 0%~95% (non-condensing) |
| HDMI Input | HDMI 2.0/1.4b standard video input interface, 2.0 up to 2160p@60Hz and 1.4b up to 1080p@120Hz |
| MIC Input | Single-End MIC input (pin header) |
| Serial Ports | 1 TTL/485 compatible, 4 TTL/RS-232 compatible |
| LED Indicator Light | Red LED indicator for standby and green LED indicator for running |
| USB Interface | 2 horizontal connectors (USB Host 3.0x1 and USB OTG 3.0x1), 8 pin headers (USB Hub 2.0x6, USB OTG 2.0x1 and USB Host 2.0x1) |
| I2C Bus | I2C pin header and FPC for I2C capacitive screen and etc. |
| Size | Length*Width*Height (135mm*95mm*14mm), PCB top side height 9mm |
| Wifi | Built-in high performance SDIO interface WiFi6 module, support IEEE 802.11 a/b/g/n/ac/ax, dual-band is configured by default. |
| SATA HD | Standard SATA 3.0 hard disk port with power supply header |
| CPU | RK3588 Quad-core Cortex-A76 and Quad-core Cortex-A55, up to 2.4GHz |
| Camera | Support USB camera within 8 million pixels |
| Real Time Clock | Ultra-low power RTC circuit (with CR1220 coin cell battery), supports scheduled power-on/off |
| Storage | The default comes with an 16GB EMMC NAND chip that can scale up to 128GB |
| CAN Bus | 2 x CAN header pin interfaces (one shared with TF card), expandable for CAN bus peripherals |
| Payment Terms | T/T |
| Supply Ability | 200+/day |
| Packaging Details | 135mm*95mm* 14mm |
| Ethernet | 2 x 10/100/1000M Adaptive Ethernet RJ45 connector |
| Buttons | Recovery (flash) button and power button |
| LVDS | 30-pin industry-standard dual LVDS supporting VESA/JEITA format up to 1080P output |
| Bluetooth | Built-in high performance serial interface BT module with support for V2.1+EDR/BT v3.0/BT v3.0+HS/BT v4.0/BT v5.0 |
| MiniPCI-E 4G | Industry standard m-PCIE 4G module interface |
| Backlight Control | 2 x industry-standard LCD backlight control interfaces (LVDS and eDP), supporting backlight on/off and brightness adjustment |
| Brand Name | |
| Model Number | D-3588 Mainboard |
| Place of Origin | China |
View Detail Information
Explore similar products
P3X Smart POS Terminal Mainboard with Primary LVDS, Secondary LVDS, Primary EDP,
H-A133L Smart HMI Motherboard Up to 5 USB Ports 9~15V wide voltage DC power
H-3568 Smart HMI Motherboard Mali-G52 2EE Support 1Tops computing power
H-3566 Smart HMI Mainboard RK3566,quad-core Cortex-A55,Clock up to 1.8GHz
Product Specification
| HDMI Output | 2 x HDMI 2.1 standard display interfaces (one shared with eDP), supporting up to 8K output. | Line Input | Support standard left and right channel line input (pin header) |
| EDP | 20-pin industry-standard EDP supporting 1~4 lanes format up to 4K@60Hz output | Amplifier Output | 8 Ohm 6W Dual Audio Amplifier Output |
| Line Output | Support standard left and right channel line output (pin header + headphone jack) | Android Version | Android 12.0 recommended, with optional Linux Buildroot / Debian 11 / Ubuntu 20.04 (to be released). |
| DDR | LPDDR4 2GB (4GB|8GB|16GB|32GB optional) | MIPI Camera | Supports up to 16MP 4-Lane MIPI CSI camera |
| Infrared RC | Standard infrared receiver pin header | DC Input | Supports 9~15V wide voltage DC power input |
| MIPI-DSI | 31-Pin FPC MIPI-DSI display port supporting up to 1920x1200 | HD/MIC | One 3.5mm 4-pole audio jack supporting headset (headphone + microphone) combo, compliant with US-standard CTIA pin assignment: Left, Right, Ground, Microphone (L-R-GND-MIC). |
| Micro SD Card | Self-eject TF card socket, supporting TF cards up to 128GB (TF card shared with CAN0) | GPIO Signals | Up to 8 x GPIO signals (2x shared with TP, 4x shared with TF card), configurable for GPIO key expansion and/or 3.3V I/O. |
| Ambient Requirement | Working temperature -20°~70°, working humidity 0%~95% (non-condensing) | HDMI Input | HDMI 2.0/1.4b standard video input interface, 2.0 up to 2160p@60Hz and 1.4b up to 1080p@120Hz |
| MIC Input | Single-End MIC input (pin header) | Serial Ports | 1 TTL/485 compatible, 4 TTL/RS-232 compatible |
| LED Indicator Light | Red LED indicator for standby and green LED indicator for running | USB Interface | 2 horizontal connectors (USB Host 3.0x1 and USB OTG 3.0x1), 8 pin headers (USB Hub 2.0x6, USB OTG 2.0x1 and USB Host 2.0x1) |
| I2C Bus | I2C pin header and FPC for I2C capacitive screen and etc. | Size | Length*Width*Height (135mm*95mm*14mm), PCB top side height 9mm |
| Wifi | Built-in high performance SDIO interface WiFi6 module, support IEEE 802.11 a/b/g/n/ac/ax, dual-band is configured by default. | SATA HD | Standard SATA 3.0 hard disk port with power supply header |
| CPU | RK3588 Quad-core Cortex-A76 and Quad-core Cortex-A55, up to 2.4GHz | Camera | Support USB camera within 8 million pixels |
| Real Time Clock | Ultra-low power RTC circuit (with CR1220 coin cell battery), supports scheduled power-on/off | Storage | The default comes with an 16GB EMMC NAND chip that can scale up to 128GB |
| CAN Bus | 2 x CAN header pin interfaces (one shared with TF card), expandable for CAN bus peripherals | Payment Terms | T/T |
| Supply Ability | 200+/day | Packaging Details | 135mm*95mm* 14mm |
| Ethernet | 2 x 10/100/1000M Adaptive Ethernet RJ45 connector | Buttons | Recovery (flash) button and power button |
| LVDS | 30-pin industry-standard dual LVDS supporting VESA/JEITA format up to 1080P output | Bluetooth | Built-in high performance serial interface BT module with support for V2.1+EDR/BT v3.0/BT v3.0+HS/BT v4.0/BT v5.0 |
| MiniPCI-E 4G | Industry standard m-PCIE 4G module interface | Backlight Control | 2 x industry-standard LCD backlight control interfaces (LVDS and eDP), supporting backlight on/off and brightness adjustment |
| Brand Name | Model Number | D-3588 Mainboard | |
| Place of Origin | China | ||
| High Light | RK3288 android mother board ，Linux android mother board ，android mother board 4K2K | ||
D-3588 Android System Edge Smart Motherboard Octa-core 64-bit Processor
D-3588 Edge Smart Motherboard Description:
D-3588 is designed based on Rockchip's new flagship chip RK3588. It uses an Octa-core 64-bit processor (quad-core Cortex-A76 + quad-core Cortex-A55) Clocked at up to 2.4GHz. Built-in 6Tops high computing power NPU , the RAM up to 32GB, supports 8K video encoding and decoding. It has rich external interfaces and supports Gigabit network, dual-band WiFi6, Bluetooth 5.0, hard drive, 4G expansion and three-screen/dual-screen differential display. It can be widely used in multi-screen splicing, AI robots, Industrial scenarios such as edge computing, security monitoring, video conferencing, and IoT gateways.
Android Motherboardparameters:
| Keyword: | D-3588 Edge Smart Motherboard | CPU: | RK3588, quad-core Cortex-A76+ quad-core Cortex-A55, Clock up to 2.4GHz |
|---|---|---|---|
| RAM: | Standard 2GB LPDDR4, 4GB/ 8GB/ 16GB/ 32GB optional | ROM: | Standard 16GB EMMC, up to 128GB |
| HDMI: | Supports 6 Tops computing power, three-core architecture, supports int4/ int8/ int16/ FP16/ BF16/ TF32 | NPU | Supports 6 Tops computing power, three-core architecture, supports int4/ int8/ int16/ FP16/ BF16/ TF32 |
| Android system: | Recommend Android 12.0 | USB Host: | 2 external USB 3.0, 7 built-in USB 2.0 |
Company Details
Business Type:
Manufacturer
Year Established:
2016
Total Annual:
1000000-1500000
Employee Number:
>100
Ecer Certification：
Site Member
Shenzhen Jupin Technology Co., Ltd. ("Jupin" for short) is a domestic high-tech enterprise focusing on the development, production and sales of iris recognition and face recognition technology products. Main products: iris recognition access control, iris recognition attendance machine, fa... Shenzhen Jupin Technology Co., Ltd. ("Jupin" for short) is a domestic high-tech enterprise focusing on the development, production and sales of iris recognition and face recognition technology products. Main products: iris recognition access control, iris recognition attendance machine, fa...
Get in touch with us
Leave a Message, we will call you back quickly!