Fuel Water Separator MB200900 with Corrosion-Resistant Aluminum Body and 99.9%

High-efficiency diesel fuel water separator removes contaminants and separates water from fuel, protecting the injection system and ensuring optimal engine performance in ISUZU 3.0L diesel engines.

• OE Quality: Manufactured to strict ISUZU dimensional and filtration specifiions for perfect fit and function.
• Corrosion-Resistant Aluminum Body: Outperforms traditional steel or plastic filters, extending service life by up to 30% in high-humidity conditions.
• High-Efficiency Filtration: Multi-layer system captures 99.9% of contaminants and water down to 5 microns.
• Integrated Water Separation: Effectively separates water from diesel fuel, preventing corrosion and enhancing combustion efficiency.
• Sensor Port Integration: Enables real-time fuel level and pressure monitoring for proactive maintenance.
• High Flow Rate: Up to 300 LPH meets the high-demand fuel system requirements of commercial trucks.
• Commercial-Grade Reliability: Engineered for continuous operation and heavy-duty use.
• Protects Injection System: Prevents injector sticking, pump wear, and costly engine damage.
• Restores Performance: Clean fuel delivery optimizes combustion efficiency and engine power.
• Direct Replacement: Simple installation with OE-certified fitment.
• Long Service Life: Durable construction for reliable performance in demanding appliions.

This fuel water separator is specifically designed for ISUZU vehicles and compatible models:

• ISUZU 100P T Series – Light-Duty Trucks
• ISUZU MU-X – SUVs with 3.0L Turbo Diesel Engines
• ISUZU D-MAX – Pickup Trucks with 3.0L Diesel Engines
• ISUZU ELF (NPR) – Light to Medium-Duty Trucks
• ISUZU NPR – Medium-Duty Trucks
• ISUZU NQR – Medium-Duty Trucks
• ISUZU NRR – Medium to Heavy-Duty Trucks
• JAC Trucks – Compatible models with 3.0L diesel engines
• QL (Qingling) Trucks – Compatible models

Compatible Engine Models: ISUZU 3.0L Turbo Diesel Engines, 4JJ1 – 3.0L Turbo Diesel

Professional installation recommended. Proper fuel system cleanliness is essential:

1. Relieve fuel system pressure – Follow manufacturer procedure to depressurize the fuel system.
2. Loe the water separator – Identify the fuel water separator assembly in the fuel line (typically near the fuel filter or engine compartment).
3. Clean the area – Thoroughly clean the separator and surrounding area to prevent contamination.
4. Disconnect fuel lines – Carefully disconnect the fuel inlet and outlet lines from the separator.
5. Disconnect sensor wiring – Unplug the sensor connector (if equipped).
6. Remove the old separator – Unbolt and remove the old filter assembly from its mounting bracket.
7. Drain any fuel – Drain any remaining fuel from the old separator.
8. Inspect fuel lines – Check fuel lines for cracks, damage, or blockage; replace if necessary.
9. Clean mounting surface – Clean the mounting bracket and surrounding area.
10. Prepare the new separator – Inspect the new separator and verify it matches the original.
11. Install the new separator – Position the new separator on the mounting bracket and secure with bolts.
12. Reconnect fuel lines – Reconnect the fuel inlet and outlet lines to the new separator.
13. Reconnect sensor wiring – Plug the sensor connector into the new separator.
14. Tighten connections – Tighten all fittings to manufacturer specifiion.
15. Prime the fuel system – Prime the fuel system according to manufacturer procedure.
16. Check for leaks – Start the engine and inspect all connections for fuel leakage.
17. Verify sensor operation – Confirm the sensor is functioning properly (if equipped).
18. Dispose of old filter – Dispose of the used filter and drained fuel in accordance with environmental regulations.

• Material Verifiion: Confirms aluminum alloy composition and synthetic filter media meet OE specifiions.
• Dimensional Inspection: Housing dimensions, mounting points, and port positions verified against OEM tolerances.
• Filtration Efficiency Testing: 99.9% particle removal efficiency (>5μm) verified.
• Water Separation Testing: Water removal efficiency verified to OE requirements.
• Flow Rate Testing: Flow capacity (300 LPH) verified to prevent fuel starvation.
• Pressure Drop Testing: Differential pressure measured to ensure minimal flow restriction.
• Leakage Testing: 100% pressure-tested for internal and external leaks.
• Sensor Port Verifiion: Sensor port compatibility and sealing verified.
• Visual Inspection: 100% checked for defects, casting flaws, or damage.
• Packaged Safely: Protected and securely packaged to prevent damage during transit.

• Neutral export packing or customized packaging available
• Carton or wooden case for safe transportation
• Fast delivery for stock items
• Shipping by Express Air or Sea

For pricing, availability, or bulk purchase of the Fuel Water Separator MB200900 For ISUZU 100P MU-X 3.0L Diesel Engine, please contact our sales team for a competitive quote and expert technical support.