High-Quality Multi-Layer Steel (MLS) Cylinder Head Gasket with Leak-Proof Design

Precision-engineered cylinder head gasket provides a leak-proof seal between the cylinder head and engine block, ensuring optimal compression, preventing fluid mixing, and protecting the engine in ISUZU 4BD2 diesel engines.

• OE Quality: Manufactured to strict ISUZU dimensional and material specifiions for perfect fit and function
• Precision Sealing: Engineered sealing beads and combustion ring reinforcements provide superior sealing under extreme conditions
• High-Temperature Resistance: Durable construction withstands extreme pressures and thermal cycling
• Leak-Proof Design: Prevents compression loss, oil leaks, and coolant leaks
• Restores Compression: Ensures proper cylinder sealing for optimal engine performance
• Protects the Engine: Prevents oil/coolant mixing that can cause astrophic engine damage
• Direct Replacement: Simple installation during engine overhaul or head gasket replacement
• Long Service Life: Engineered to withstand the rigors of heavy-duty commercial operation

This cylinder head gasket is specifically designed for ISUZU vehicles and equipment equipped with the 4BD2 engine:

• ISUZU NPR – Medium-Duty Trucks
• ISUZU NKR – Light to Medium-Duty Trucks
• ISUZU ELF – Light to Medium-Duty Trucks
• ISUZU NHR – Light-Duty Trucks
• Industrial Appliions – Forklifts, generators, and various equipment using 4BD2 engines

• 4-Cylinder, Inline Diesel
• Displacement: 3.9L (3856cc)
• Naturally Aspirated / Turbocharged (depending on variant)
• Valvetrain: OHV
• Widely used in NPR, NKR, and various industrial appliions

1. Allow engine to cool – Ensure the engine is completely cool before beginning work
2. Disconnect battery – Disconnect the negative battery cable before beginning work
3. Drain coolant and oil – Drain the cooling system and engine oil completely
4. Remove the cylinder head – Remove the cylinder head from the engine block
5. Remove the old head gasket – Carefully remove the old gasket from the block and head surfaces
6. Clean sealing surfaces – Thoroughly clean the cylinder head and engine block sealing surfaces
7. Inspect the cylinder head – Check for warpage, cracks, or damage; machine if necessary
8. Inspect the engine block – Check the block surface for warpage, scoring, or damage
9. Check cylinder head bolts – Use new cylinder head bolts (recommended by ISUZU)
10. Prepare the new gasket – Inspect the new gasket and verify it matches the original
11. Position the new gasket – Place the new gasket on the engine block, ensuring correct orientation
12. Install the cylinder head – Position the cylinder head on the gasket
13. Install and torque bolts – Install head bolts and torque in the correct sequence and stages
14. Reconnect components – Reconnect all coolant hoses, oil lines, and electrical connections
15. Refill with fresh fluids – Fill with correct type and grade of coolant and engine oil
16. Reconnect battery – Reconnect the negative battery cable
17. Start the engine – Start the engine and check for leaks
18. Check for leaks – Inspect for oil, coolant, or combustion leaks around the head gasket
19. Re-torque – After engine heat cycle, re-torque head bolts if specified in service manual

• Material Verifiion: Confirms gasket material meets OE temperature, pressure, and oil resistance specifiions
• Dimensional Inspection: Gasket thickness, bore alignment, and bolt hole positions verified against OEM tolerances
• Sealing Performance Testing: Compression and sealing strength verified under extreme thermal and pressure conditions
• Visual Inspection: 100% checked for defects, imperfections, or damage
• Packaged Safely: Protected and securely packaged to prevent damage during transit

• Neutral export packing or customized packaging available
• Carton or wooden case for safe transportation
• Fast delivery for stock items
• Shipping by Express Air or Sea