Clutch Pressure Plate Assembly 1-31220373-2 1312203732 For ISUZU FVR34 6HK1

Features & Advantages 

• OE Quality: Manufactured to strict ISUZU dimensional and material specifications for perfect fit and function.

• High Clamping Force: Heavy-duty diaphragm spring provides reliable torque transmission without slipping.

• Durable Construction: High-strength cast iron cover and hardened drive straps withstand high torque and heat.

• Precision-Ground Friction Surface: Ensures uniform contact with the clutch disc for smooth engagement.

• Consistent Pedal Feel: Diaphragm spring design offers low pedal effort and consistent release characteristics.

• Dynamically Balanced: Reduces vibration and ensures smooth operation at all engine speeds.

• Direct Replacement: Matches OE mounting bolt pattern, dowel pin locations, and release bearing interface.

• Long Service Life: Engineered for heavy-duty commercial truck applications.

• Complete Assembly: Ready to install with no additional components required.

• Restores Clutch Performance: Eliminates slipping, chattering, and hard shifting caused by a worn pressure plate. 

  

Vehicle & Engine Compatibility

This clutch pressure plate assembly is specifically designed for ISUZU heavy-duty trucks and commercial vehicles. Common applications include:

• ISUZU FVR34 (Heavy-Duty Trucks)

• ISUZU FR, FS, FT series (as applicable)

• ISUZU 6HK1 Engine Specifications:

  • 6-Cylinder, Inline Diesel

  • Displacement: 7.8L

  • Valvetrain: OHV

  • Application: Heavy-duty trucks, buses, and industrial equipment

• Also compatible with various ISUZU models using the 6HK1 engine and the same clutch configuration

Installation Notes

Professional mechanic or transmission specialist installation is strongly recommended:

1. Ensure vehicle is safely supported – Use appropriate jack stands or a lift to support the vehicle.

2. Disconnect battery – Always disconnect the negative terminal before working.

3. Remove the transmission – Support the transmission and remove it from the vehicle.

4. Remove the old clutch assembly – Unbolt the pressure plate from the flywheel in a criss-cross pattern; remove the pressure plate and clutch disc.

5. Inspect the flywheel – Check for cracks, hot spots, scoring, or wear; resurface or replace if necessary.

6. Inspect the release bearing and pilot bearing – Replace if worn or noisy.

7. Clean the flywheel surface – Remove all oil, grease, and debris from the flywheel friction surface.

8. Install the new clutch disc – Position the clutch disc against the flywheel with the proper orientation (usually “flywheel side” marked).

9. Align the clutch disc – Insert a clutch alignment tool through the disc and into the pilot bearing.

10. Install the new pressure plate – Position the pressure plate over the disc and align with flywheel dowel pins.

11. Install mounting bolts – Hand-start all bolts; tighten in a criss-cross pattern to manufacturer torque specifications.

12. Remove the alignment tool – Carefully withdraw the alignment tool from the clutch assembly.

13. Install the release bearing – Install the new release bearing on the release fork or input shaft retainer.

14. Reinstall the transmission – Carefully reinstall the transmission and secure all mounting bolts.

15. Check clutch operation – Verify proper clutch pedal feel and release function.

16. Road test – Test drive to verify smooth engagement, no slipping, and proper gear shifting.

Quality Control

Packaging and Delivery

Inquiry