Torque Rod Assembly 1-51511655-0 For ISUZU CXZ51K CYZ51K CYH52 CXZ81K EXZ51K

The Torque Rod Assembly (OEM Number: 1-51511655-0 / 1515116550) is a premium-quality, direct replacement suspension component designed specifically for ISUZU CXZ51K, CYZ51K, CYH52, CXZ81K, and EXZ51K series heavy-duty trucks equipped with 6WF1 and 10PE1 diesel engines.

Function: Torque rod assembly connects axle to frame, controlling axle movement and transmitting driving/braking forces to maintain suspension geometry and vehicle stability in ISUZU heavy trucks.

• OE Quality: Manufactured to strict ISUZU dimensional and material specifications for perfect fit and function
• High-Strength Construction: Forged or cast steel bar withstands high tensile and compressive loads
• Durable Bushings: High-quality rubber or polyurethane bushings absorb shock and provide consistent articulation
• Corrosion-Resistant: Surface treatment protects against moisture, road salt, and environmental exposure
• Restores Suspension Stability: Eliminates excessive axle movement, clunking, and vibration caused by worn torque rod
• Improves Handling: Maintains proper axle alignment and pinion angle for safe, predictable vehicle control
• Reduces Tire Wear: Correct suspension geometry prevents uneven and premature tire wear
• Direct Replacement: Matches OE mounting points, length, and bushing configuration for simple installation
• Long Service Life: Engineered for heavy-duty commercial truck duty cycles
• Essential Safety Component: Critical for maintaining suspension integrity and vehicle stability

This torque rod assembly is specifically designed for ISUZU heavy-duty trucks and commercial vehicles:

• ISUZU CXZ51K (Heavy-Duty Trucks)
• ISUZU CYZ51K (Heavy-Duty Trucks)
• ISUZU CYH52 (Heavy-Duty Trucks)
• ISUZU CXZ81K (Heavy-Duty Trucks)
• ISUZU EXZ51K (Heavy-Duty Trucks)

ISUZU 6WF1 Engine Specifications:

• V10, Diesel
• Displacement: 14.2L-15.0L (verify with VIN)

ISUZU 10PE1 Engine Specifications:

• V10, Diesel
• Displacement: 16.4L (verify with VIN)

Also compatible with various ISUZU models using the same suspension torque rod configuration.

1. Ensure vehicle is safely raised - Use appropriate jack stands or a lift to support the axle and frame
2. Locate the torque rod - Identify the torque rod to be replaced and note its mounting orientation
3. Remove mounting bolts - Unbolt the torque rod from the axle and frame brackets; support the rod as needed
4. Remove the old torque rod - Carefully remove the old assembly; note the position of any spacers or washers
5. Inspect mounting brackets - Check axle and frame brackets for cracks, wear, or elongation of bolt holes
6. Inspect bushings - Check new and existing bushings for proper fit; replace if worn or damaged
7. Clean mounting surfaces - Remove dirt, rust, and debris from mounting brackets and bolt holes
8. Install the new torque rod - Position the new assembly between the mounting brackets; align bolt holes
9. Install mounting bolts - Hand-start all bolts; use new hardware if specified
10. Torque bolts - Tighten all mounting bolts to manufacturer torque specifications
11. Check clearance - Ensure the torque rod does not contact other components throughout suspension travel
12. Lower the vehicle - Carefully lower the vehicle and remove jack stands
13. Check alignment - A wheel alignment check is recommended after installation
14. Road test - Test drive to verify proper handling, no abnormal noise, and no vibration

• Material Verification: Confirms steel composition and bushing materials meet ISUZU strength and durability specifications
• Dimensional Inspection: Length, mounting hole spacing, and bushing bore dimensions verified within OEM tolerances
• Weld Inspection: Welds checked for penetration, cracks, and conformity to specification
• Bushing Integrity Testing: Bushings tested for proper hardness, bonding, and articulation
• Load Testing: Sample tested to ensure the assembly withstands specified tensile and compressive loads
• Visual Inspection: 100% checked for cracks, corrosion, or manufacturing defects
• Packaged Safely: Protected and packaged to prevent damage during transit

• Neutral export packing or customized packaging available
• Carton or wooden case for safe transportation
• Fast delivery for stock items
• Shipping by Express Air or Sea

For pricing, availability, or bulk purchase of the Torque Rod Assembly 1-51511655-0 For ISUZU CXZ51K CYZ51K CYH52 CXZ81K EXZ51K 6WF1 10PE1, please contact our sales team for a competitive quote and expert technical support.